Softstarters & Accessories

Soft Starter, S811+, 290 mm, 720 Amp, Pump Control with OPT Inside Delta

Category: Advanced Control Softstarters

SMC-50, Solid-State Controller with Circuit Breaker, 201 Amp, NEMA Type 1/12/3R/IP54 Enclosure ,400 - 480 Volt AC, 3 Phase, 120 Volt AC Control, 250 Amp Circuit Breaker

Category: Enclosed Softstarters

Softstarter PSTX105-600-70 has a rated maximum operational current of 105 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard, lugs built in, good for up to 2/0

Category: Advanced Control Softstarters

PSE Series Softstart (Compact Style.) Motor Voltage: 208 - 600 Volt AC. Control Voltage: 120/240 Volt AC. Normal Duty: 68 FLA (Full Load Amps). Heavy Duty: 60 FLA (Full Load Amps). Screw Mount. Includes: Digital Keypad, Optional FieldBus Communication, Overload Protection and By-Pass.

Category: Advanced Control Softstarters

Soft Starter, ATS22, Control 220 Volt AC, Power 230 Volt AC, 37 kW, 400 - 440 Volt AC, 75 kW, 500 Volt AC, 90 kW

Category: Basic Control Softstarters

PSE External Keypad, Includes 3M Cable. For PSE18-370 Softstarters.

Category: Softstarter Interface Modules

Softstarter PSTX170-690-70 has a rated maximum operational current of 170 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

Softstarter PSTX 300-690-70 has a rated maximum operational current of 300 A with an operating voltage span from 208...690 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSTX features a three-phase control soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR and Event signal is available from relay outputs in NO (normally open state). The PSTX has functions such as current limit, kickstart, analog output, EOL, motor heating and pump cleaning. PSTX also features features jog, braking, stand-still brake, diagnostics, sequence start and emergency/fire pump mode as standard

Category: Advanced Control Softstarters

DS7 Series Soft Start Controller. 15.2 Amp. Motor Voltage: 230V - 460V AC. Control Voltage: 24V AC/DC. Requires: Overload Protection and Panel Mounting Adapter for Overload.

Category: Basic Control Softstarters

DS7 Series Soft Start Controller. 32 Amp. Motor Voltage: 230V - 460V AC. Control Voltage: 24V AC/DC. Requires: Overload Protection and Panel Mounting Adapter for Overload.

Category: Basic Control Softstarters

S611 Series Solid-State Soft Starter. Control Voltage: 120V AC. Load Voltage: 600V AC, 156 Amp, 78 - 156 FLA (Full Load Amps), Non-Combination, Standard Duty, 300% Current or 15 Seconds, 115% Continuous. Hp Ratings: 50 @ 208V, 60 @ 240V, 125 @ 480V, 150 @ 600V. Includes: Overload Protection, Bypass, Serial Modbus Communication. ***Must add (2) Lug Kits***

Category: Basic Control Softstarters

Enclosed Softstarter, 250 Hp @ 480V, 302 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 48”H x 36”W x 16”D.

Category: Enclosed Softstarters

PSTX Series Softstart (New Advanced Range). Motor Voltage: 208 - 600V AC. Supply Voltage: 100 - 250V AC. Control Voltage: 24V DC, Supplied by Softstart or External Supply. Normal Duty: 590 FLA (Full Load Amps). Heavy Duty: 480 FLA (Full Load Amps). Includes: Removable Remote Mountable Digital Key-Pad, Integrated RS485 Modbus RTU, Anybus FieldBus Communication Slot, (1) PTC Motor Temp Input, (1) Analog Output, (3) Programmable Signal Relays, Programmable Overload Protection, and Integrated Bypass. Weight: 60 Lbs. 14 Inch Width, 19 Inch Height, 11 Inch Depth ** ASSOCIATED LUG KIT REQUIRED **

Category: Advanced Control Softstarters

PSTX210-600-70 Softstarter For Max 600V Main Voltage & 100 - 250V 50/60Hz Control Supply Voltage IEC Maximum of 210 Amp, 10 Inch Width, 19 Inch Height, 11 Inch Depth

Category: Advanced Control Softstarters

S611 Series Solid-State Soft Starter. Control Voltage: 120V AC. Load Voltage: 600V AC, 125 Amp, 62.5 - 125 FLA (Full Load Amps), Non-Combination, Standard Duty, 300% Current or 15 Seconds, 115% Continuous. Hp Ratings: 40 @ 208V, 40 @ 240V, 100 @ 480V, 125 @ 600V. Includes: Overload Protection, Bypass, Serial Modbus Communication. ***Must add (2) Lug Kits***

Category: Basic Control Softstarters

Enclosed Softstarter, 100 Hp @ 480V, 130 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 30”H x 30”W x 12”D.

Category: Enclosed Softstarters

SMC-50, Fully Solid State, Open, Smart Motor Controller, 24,Volt DC Control, 200 - 480 Volt AC, 420 Amp Line, 727 Amp, Delta, Normal Duty, 361 Amp Line, 625 Amp, Delta, Heavy Duty

Category: Advanced Control Softstarters

PSTX85-690-70 Softstarter For Max 690V Main Voltage &100 - 250V 50/60Hz Control Supply Voltage IEC Maximum of 85 Amp, 6 Inch Width, 12 Inch Height, 8 Inch Depth (Includes Lugs)

Category: Advanced Control Softstarters

S611 Series Solid-State Soft Starter. Control Voltage: 120V AC. Load Voltage: 600V AC, 242 Amp, 120 - 242 FLA (Full Load Amps), Non-Combination, Standard Duty, 300% Current or 15 Seconds, 115% Continuous. Hp Ratings: 75 @ 208V, 75 @ 240V, 200 @ 480V, 250 @ 600V. Includes: Overload Protection, Bypass, Serial Modbus Communication. ***Must add (2) Lug Kits***

Category: Basic Control Softstarters

Soft Starter, 135 Amp, 600 Volt AC, 3-Phase, 80 kW, 100 Horse Power, Standard Duty

Category: Advanced Control Softstarters

S811 Series Communicating Softstarter. Control Voltage: 24V DC. Load Voltage: 200 - 575V AC, 240 Amp, Non-Combination, 200 mm Frame Size. 15-Second Ramp, 4 Starts per Hour, 300% Current Limit @ 40 Degrees Celcius. Hp Ratings: 60 @ 200V, 75 @ 230V, 150 @ 460V. Includes: Internal Solid-State Overload Protection, Run Bypass Mode. ***Must use C-H Power Supply and (2) Lug Kits***

Category: Advanced Control Softstarters

Enclosed Softstarter, 75 Hp @ 480V, 104 Amp @ 480V, NEMA 4, PSTX Series, Extreme Duty. Includes: Thermal Magnetic CB, Emergency Bypass (AC3), Control Power Transformer, Start/Stop, H/O/A, 4-Wire Service Entrance Neutral Kit. 30öH x 30öW x 12öD.

Category: Enclosed Softstarters

Soft Starter, Altistart 22, 88 Amp, Control 220 Volt AC, Power 230 Volt AC, 22 kW, 400 - 440 Volt AC, 45 kW, 500 Volt AC, 55 kW

Category: Basic Control Softstarters

Soft Starter, Altistart 22, 62 Amp, Control 220 Volt AC, Power 230 Volt AC, 15 kW, 400 - 440 Volt AC, 30 kW, 500 Volt AC, 37kW

Category: Basic Control Softstarters