Drivers - LED

Outdoor Dimmable LED Driver with SimpleSet (Programmable replacement LED driver), 120/277 Volt AC Input, 70-210 Volt DC Output, 0.1 - 1.25A, 180 Watt Output ***Programming Requires An External Device And Software Package available at Platt. Contact your local Platt Branch for more information.

Category: LED Driver Power Supplies

79370 50W PROGRAMABLE LOW CURRENT OUTDOOR LED POWER SUPPLY UNV 2DIM *Sylvania Part # 79370*

Category: LED Driver Power Supplies

ADV LEDINTA0024V41FLOM XITANI

Category: LED Driver Power Supplies

LED Driver, Dimmable, Compact, Electronic, 60 Watt Input, 12 Volt DC Output, Tape Light Accessory

Category: LED Driver Power Supplies

Plug-in Driver, 30 Watt, 12 Volt

Category: LED Driver Power Supplies

KTLD-30-UV-SC1050-56-VDIM-U7-CP 30W 350-1050 MA OUTPUT 0-10V DIMMING UNPROGRAMMED

Category: LED Driver Power Supplies

LED Dimmable Power Supply, 200 Watt, 120-277 Volt AC Input, 24 Volt DC Output, Listed for Wet Locations

Category: LED Driver Power Supplies

LED Driver: 2 or 3 Lamp T8 LED Electronic, Input Voltage: 120-277V AC, Output: See Cut Sheet for multiple uses with Philips LED InstatFit T8 Lamps.

Category: LED Driver Power Supplies

EvoKit Field Installed Emergency Battery Backup. Universal Input Voltage: 120-277 VAC, 50/60 Hz, *Philips Part # 503441 *

Category: LED Driver Emergency Power Supplies

LED Battery Back Up Emergency Driver, 9 Watt, Input Voltage: 120-277 Volt, Output Voltage: DC120-200V. 250V Max (Emergency Mode: 9W, Constant Power), Discharge time: 90 Minutes, 0-10V Dimming. Indoor Use Only. Halco BBU/EM9WU, 90313.

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Metal Case dual conduit on one end of case with 90° adapter and 2-wire ITS attached to one conduit, and lead wires in the other.. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

LED Electronic Driver, 60 Watt, 120 Volt

Category: LED Driver Power Supplies

KTLD-25-UV-SC1250-56-VDIM-W1-CP 25W 420-1250 MA OUTPUT 0-10V DIMMING UNPROGRAMMED

Category: LED Driver Power Supplies

Remote Field installable 10W Emergency driver kit: Use for FluxPanel SBP: Selectable LED flat panel / FluxPanel FPZ: FluxPanel Gen2 LED flat panel / NWL Wraparound LED / SDS LED Selectable Strip. Construction/Finish: Bodine BSL310C2WM; Die formed .0625” galvanized steel J box and J box cover, which includes both ¾” and ½” knockouts; ½" Chase nipple and nut; Die formed .0625” galvanized steel J box mounting bracket; Two-wire illuminated test switch (2W-ITS) and wall plate.

Category: LED Driver Emergency Power Supplies

Dimmable 30W ELV Driver: Input Voltage: 100-130V AC, Output Voltage: 12V DC / 3-30W (non-dimming) 18-30W (dimming applications), Forward phase / Reverse phase / ELV / TRIAC, cETLus Listed (dry locations). Dimensions: 7-1/16”L x 2-3/8”W x 1-3/8”H.

Category: LED Driver Power Supplies

10 Watt Emergency LED Driver, Class 2 Output, Very Compact Low Profile Case, ABConnect and STSelect Equipped, Metal IP65 Bi-Color LED and Test Switch, 14.1” x 1.18” x 1"

Category: LED Driver Emergency Power Supplies

LED Emergency Driver. Input Voltage: 120 Volts AC, 60Hz. Output Voltage: 120 VAC, 60Hz. Maximum Load Power (including AC ballast/driver): 100 Watts. SINE WAVE Emergency Lighting inverter with Dimming Capabilities

Category: LED Driver Emergency Power Supplies

10 Watt Emergency Driver for Linear LED Strips, 120-277 Volt, 90 Minute Illumination Time, Metal Case No Conduit

Category: LED Driver Emergency Power Supplies

FHS KIT TRF 3W LN MOD BATT C

Category: LED Driver Emergency Power Supplies

AMER.LTG ADPTPRO DR 300 24DRIVER

Category: LED Driver Power Supplies

LED Driver: 1-80 watt (non-dimming); 48-80 watt (dimming), 100-130V AC, 24-VDC, 50/60hz input via 5" long, 18awg, 3 conductors. C/ETL/US listed for wet location (*Must be mounted higher than 1 foot off the ground). Dimensions: 13-3/4" L x 3-1/16" W x 2-5/16" H. ELV-60J-12: Dimmable with standard leading edge dimmers (aka forward phase, MLV, Incandescent, TRIAC and trailing edge dimmers (aka 2-wire reverse phase, ELV). P/N: ELV-60J-24

Category: LED Driver Power Supplies

LED Programmable Driver, 1500 mA, 55 Watt, 120-277 Volt, 0-10V Dimming, Multi-Exit

Category: LED Driver Power Supplies

SAT S8002 10 WATT LED EMERGENCY DRIVER

Category: LED Driver Emergency Power Supplies