LED - Drivers

Plug-in Driver, 30 Watt, 12 Volt

Category: LED Driver Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Matal Case with Conduit. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 For Field or Factory Installation (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

EvoKit Field Installed Emergency Battery Backup. Universal Input Voltage: 120-277 VAC, 50/60 Hz, *Philips Part # 503441 *

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

10 Watt Emergency Driver for Linear LED Strips, 120-277 Volt, 90 Minute Illumination Time

Category: LED Driver Emergency Power Supplies

LED Electronic Driver, 60 Watt, 120 Volt

Category: LED Driver Power Supplies

KTLD-25-UV-SC1250-56-VDIM-W1-CP 25W 420-1250 MA OUTPUT 0-10V DIMMING UNPROGRAMMED

Category: LED Driver Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Metal Case dual conduit on one end of case with 90° adapter and 2-wire ITS attached to one conduit, and lead wires in the other.. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant

Category: LED Driver Emergency Power Supplies

10 Watt Emergency LED Driver, Class 2 Output, Very Compact Low Profile Case, ABConnect and STSelect Equipped, Metal IP65 Bi-Color LED and Test Switch, 14.1” x 1.18” x 1"

Category: LED Driver Emergency Power Supplies

Dimmable 30W ELV Driver: Input Voltage: 100-130V AC, Output Voltage: 12V DC / 3-30W (non-dimming) 18-30W (dimming applications), Forward phase / Reverse phase / ELV / TRIAC, cETLus Listed (dry locations). Dimensions: 7-1/16”L x 2-3/8”W x 1-3/8”H.

Category: LED Driver Power Supplies

LED Emergency Driver. Input Voltage: 120 Volts AC, 60Hz. Output Voltage: 120 VAC, 60Hz. Maximum Load Power (including AC ballast/driver): 100 Watts. SINE WAVE Emergency Lighting inverter with Dimming Capabilities

Category: LED Driver Emergency Power Supplies

10 Watt Emergency Driver for Linear LED Strips, 120-277 Volt, 90 Minute Illumination Time, Metal Case No Conduit

Category: LED Driver Emergency Power Supplies

AMER.LTG ADPTPRO DR 300 24DRIVER

Category: LED Driver Power Supplies

LED Emergency Battery Backup, 20 Watt, 20 to 50 (LV) or 125 to 200 (HV) Output, 120-277V

Category: LED Driver Emergency Power Supplies

Controller for Programmable LED Drivers

Category: LED Driver Accessories

Emergency Battery Backup for LED Products with Internal Drivers: Input Voltage: 100-277VAC, 50/60Hz, Output Power: 25 Watts / 170VDC. Dual Flex Conduit. Dimensions: L 15.40” x W 2.13” x H 1.57”. AKA: EM-H25170-LBF

Category: LED Driver Emergency Power Supplies

LED Driver: 1-80 watt (non-dimming); 48-80 watt (dimming), 100-130V AC, 24-VDC, 50/60hz input via 5" long, 18awg, 3 conductors. C/ETL/US listed for wet location (*Must be mounted higher than 1 foot off the ground). Dimensions: 13-3/4" L x 3-1/16" W x 2-5/16" H. ELV-60J-12: Dimmable with standard leading edge dimmers (aka forward phase, MLV, Incandescent, TRIAC and trailing edge dimmers (aka 2-wire reverse phase, ELV). P/N: ELV-60J-24

Category: LED Driver Power Supplies

FULHAM T1M1UNV105P60E WORKHORSE LED - SINGLE CHANNEL - 0-10V DIMMING LED DRIVER - UNIVERSAL VOLTAGE INPUT - PROGRAMMABLE 350-1050MA CONSTANT CURRENT OUTPUT - 60W MAX - LINEAR CASE W/END TERMINALS - IP60

Category: LED Driver Power Supplies

Fieldset Driver, 180W, 120-277V, 0-10V Dimming, Dims To 1%, Fieldset Programmable

Category: LED Driver Power Supplies

SAT S8002 10 WATT LED EMERGENCY DRIVER

Category: LED Driver Emergency Power Supplies

LED Programmable Driver, 1500 mA, 55 Watt, 120-277 Volt, 0-10V Dimming, Multi-Exit

Category: LED Driver Power Supplies

LED Electronic Dimmable Power Supply, 96 Watt, 120/277 Volt AC Input, 24 Volt DC Output, Dimensions: 6.97x2.76x1.4 Inch, Class 2, FCC Compliant

Category: LED Driver Power Supplies

LED Dimmable Magnetic DC Driver, 40 Watt, 120 Volt AC Input, 24 Volt DC Output

Category: LED Driver Power Supplies

LED Electronic Dimmable Power Supply, 40 Watt, 120/277 Volt AC Input, 24 Volt DC Output, Dimensions: 6.97x2.76x1.4 Inch, Class 2, FCC Compliant

Category: LED Driver Power Supplies