Lighting Contactor Mechanical Hold Kits

Lighting Contactor, Conversion Kit, Electrically Held to Mechanically Held, 120 Volt AC, 3 Wire

Category: Lighting Contactor Mechanical Hold Kits

AB 500LG-47CM120 500LG CONTL MOD,

Category: Lighting Contactor Mechanical Hold Kits

Lighting Contactor, Conversion Kit, Electrically Held to Mechanically Held, 120 Volt AC

Category: Lighting Contactor Mechanical Hold Kits

30 Amp, 600V Rated, Mechanical Hold Down Kit 2-Wire for the C30 Modular Style Lighting Contactor, 120V AC Control Voltage.

Category: Lighting Contactor Mechanical Hold Kits

<ul><li>Lighting Contactors.<li> Conversion Kits for Mechanically Held Contactors.<li> Kits for converting electrically held contactors to a mechanically held version.<li> Kits includes control module, latch, latch cover and auxiliary contact(s) plus installation instructions.<li> Conversion kits are suitable for coil voltages 277V and below.<li> Use CPT to reduce coil voltage if line voltage is higher than 277V.<li> Control Circuit Voltage: 200-277 Vac.<li> Control Circuit Wiring: 3-wire.<li> Coil Voltage Range: 24-277 Vac.<li> Auxillary Contacts: (1) 1 Pole.<li> Auxiliary contact block required for feedback loop, alternate 2 pole blocks may be required for status feedback and/or pilot lights.</li></ul>

Category: Lighting Contactor Mechanical Hold Kits

Lighting Contactor, Conversion Kit, Electrically Held to Mechanically Held, 277 Volt AC

Category: Lighting Contactor Mechanical Hold Kits

Contactors, IEC, Accessories, Type: Mechanical Latch Block, Contact Rating A600, Q600, For Use With: All CL Contactors, Features: 110-125 VDC @ 50/60 Hz *** Discontinued ***

Category: Lighting Contactor Mechanical Hold Kits

AB 500LC-47CM120 CONTROL MODULE *** Discontinued ***

Category: Lighting Contactor Mechanical Hold Kits

30 Amp, 600V Rated, Mechanical Hold Down Kit 2-Wire for the C30 Modular Style Lighting Contactor, 120V AC Control Voltage

Category: Lighting Contactor Mechanical Hold Kits

Lighting Contactor, Conversion Kit, Electrically Held to Mechanically Held, 24 Volt AC

Category: Lighting Contactor Mechanical Hold Kits

3WIRE CONTROL MODULE KIT 120V

Category: Lighting Contactor Mechanical Hold Kits

Lighting Contactors.Conversion Kits for Mechanically Held Contactors.Kits for converting electrically held contactors to a mechanically held version.Kits includes control module, latch, latch cover and auxiliary contact(s) plus installation instructions.Conversion kits are suitable for coil voltages 277V and below.Use CPT to reduce coil voltage if line voltage is higher than 277V.Control Circuit Voltage: 24 Vac.Control Circuit Wiring: 3-wire.Coil Voltage Range: 24-277 Vac.Auxillary Contacts: (1) 1 Pole.Auxiliary contact block required for feedback loop, alternate 2 pole blocks may be required for status feedback and/or pilot lights.

Category: Lighting Contactor Mechanical Hold Kits

Module Kit 2-wire For The C30 Mechanically Held Lighting Contactor, 30 Amp, 24vac

Category: Lighting Contactor Mechanical Hold Kits

C30 Accessory, Mechanically Held Module Kits, Used With C30 Lighting Contactor, 30A, 3-Wire, 110-120v

Category: Lighting Contactor Mechanical Hold Kits

CUT C323CM3A LIGHTING CONTACTOR

Category: Lighting Contactor Mechanical Hold Kits

Module Kit 3-wire For The C30 Mechanically Held Lighting Contactor, 30 Amp, 200-277v Ac

Category: Lighting Contactor Mechanical Hold Kits