Low Voltage Gel Filled Splice Kits

GelCap Splice Cover, 2 - 4 AWG, Water Resistant Stub Splice Cover Kit

Category: Low Voltage Gel Filled Splice Kits

ALR CPGI-GELWRAP-UF-200 SPLC KIT

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Gel Tap Splice Kit with Connector for #14 - #2 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

GelCap Motor Connection Kit, 1000 Volt, Wire Range: 16 - 10 AWG, For Use Insulating, Sealing, and Protecting Stub Splice Connections up to 1000 Volt.

Category: Low Voltage Gel Filled Splice Kits

ALR CPGI-GTAP-2 IN-LINE SPLICE KIT

Category: Low Voltage Gel Filled Splice Kits

RCH GELCAP-8-NS-1V(B1) A98934-000 GEL CAP

Category: Low Voltage Gel Filled Splice Kits

RCH GELCAP-8-S-1V(B1) F61828-000 GEL CAP

Category: Low Voltage Gel Filled Splice Kits

GelWrap Splice, 8 Inch Long, 14/2 - 8/3 AWG With Ground, Submersible

Category: Low Voltage Gel Filled Splice Kits

ALR CPGI-GTAP-1 IN-LINE SPLICE KIT

Category: Low Voltage Gel Filled Splice Kits

RCH GELCAP-8-NS-2V(B1) C15359-000 GEL CAP

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Gel Tap Splice Kit with Connector for #14 - 2/0 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice In-Line Gel Splice Kit with Connector, 2 - 4/0 AWG, Black, 1000 Volt

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Push On Gel Stub Splice Kit, 16 - 10 AWG

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice H Tap Gel Splice Cover for 6 - 2 AWG The Easy-Splice low-voltage H-Frame closure insulates and seals low-voltage cable-taps and splices made with H-frame compression connectors. The closure utilizes sealing gel material to seal and protect the connection from moisture ingress, corrosion and pollution. To install, simply place the connection on the closure and press the closure together. The low-voltage H-frame closure is ideal for both underground and overhead applications and is especially useful for street lighting applications. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C, 1,000 volts, UV resistant. The Easy-Splice H tap gel splice covers do NOT include connector. Approved Connectors: Blackburn WR9 Burndy YPC2A8U Homac UB214 NSi Industries WR9 T&B 63105

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Gel Stub Splice Kit with Connector, (Hole A) - 14-2/0 AWG - (Hole B) - 6-14 AWG, 1000 Volt, White

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Push On Gel Stub Splice Kit 250 - 500 MCM Quickly and conveniently insulate, seal and protect sub splice connections up to 1,000 Volts. The robust yet compact design is engineered to handle the harsh environment of motor and many other connection applications (including street lights). Specially formulated material provides excellent abrasion resistance, insulation value, and UV resistance. Each cap size is designed to fit a wide range of cable sizes. The expandable design keeps the cap as small as possible allowing it to expand only as much as needed to fit. Rated 105¦C. cULus listed. The kit includes one gel filled cap, one cap clamp, and one phase separator. The kits include three of each one per phase. INSTALLATION: GSS connector kits provide the fastest installation. Simply slide the cover down over the connection and snap the clamp closed. Sealant gel is already in the cap.

Category: Low Voltage Gel Filled Splice Kits