Splice Kits - Low Voltage

THB 5KVBOOT-2L MTR PIGTAIL CO

Category: Low Voltage Motor Lead Splice Kits

GelWrap Splice, 8 Inch Long, 14/2 - 8/3 AWG With Ground, Submersible

Category: Low Voltage Gel Filled Splice Kits

THB MDBOOT-4 MOTOR DISC. BOOT

Category: Low Voltage Motor Lead Splice Kits

Easy-Splice Gel Tap Splice Kit with Connector for #14 - 2/0 AWG The Easy-Splice gel tap splice kit provides a fast and simple method for connecting, insulating, and environmentally sealing low-voltage splices. The splice kit is designed for underground and overhead environments and is useful for street lighting applications. The splice kit's dual-rated mechanical connector splices a wide range of cables, including copper and aluminum. The connector's four port design allows maximum inventory flexibility. The sealant gel protects the connection from moisture ingress, corrosion and pollution. The hinged splice closure can be installed over the connector in seconds by simply snapping the cover shut. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C.

Category: Low Voltage Gel Filled Splice Kits

3m(tm) 3/c Low Voltage Splice Kit 5733, 2/0 Awg-250 Kcmil?

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice In-Line Gel Splice Kit with Connector, 2 - 4/0 AWG, Black, 1000 Volt

Category: Low Voltage Gel Filled Splice Kits

Low Voltage Splice Kit, 3 Conductor, 2-1/0 AWG, 600V, For Use With Armored Cable, 1 Per Case

Category: Low Voltage Cold Seal Splice Kits

Easy-Splice Direct Burial Splice Kit with Rubber Cover 14 - 2/0 AWG Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice Push On Gel Stub Splice Kit, 16 - 10 AWG

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

Buchanan; Y-tap Kit; Breakaway Y-tap Kits, Fused; Voltage Rating: 600 V; Amperage Rating: 1/10 - 30 Amp; Line Side Cable Size: 1 Awg; Line Side Crimp Type: Copper; Line Side Insulation Diameter: .155 - .430 In; Load Side Cable Size: 12 - 6awg; Load Side Crimp Type: Copper; Load Side Insulation Diameter: .120 - .430 In

Category: Low Voltage Direct Burial Splice Kits

Crimpit™ H-Tap Cover, Flame Retardant, 250 kcmil Max Conductor, 0.95" Max Connector Length, Purple

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice Wrap-Around UF Splice Kit for 14/2 - 8/3 with Ground Easy-Splice Wrap-Around UF Splice Kit provides a quick and convenient method of splicing underground feeder (UF) cable. Convenient wrap-around design and fast installation. No heating or waiting for compounds to cure. The unique sealing gel entirely encapsulates the splice, completely sealing out moisture and other contaminants. Kit includes connector and closure. Rated for 600V applications.

Category: Low Voltage Gel Filled Splice Kits

THB M2DBOOT2 INSUL BOOT

Category: Low Voltage Motor Lead Splice Kits

Direct Burial Splice Kit, Dual Rated, Conductor Range 2-8, Includes (1) SPA-2 Splice and (2) Pieces of Heat Shrink, UL, CSA

Category: Low Voltage Direct Burial Splice Kits

GelWrap Splice, 8 Inch Long, 14 - 4/0 AWG With Ground, Submersible

Category: Low Voltage Gel Filled Splice Kits

Direct Burial Splice Kit, Dual Rated, Conductor Range 250-1, Includes (1) SPA-250 Splice and (2) Pieces of Heat Shrink, UL, CSA

Category: Low Voltage Direct Burial Splice Kits

Cold Shrink Inline Splice Kit, 5730 Series, 3 or 4 Conductor, 14 - 10 AWG, 600 Volt, Includes 1 Roll of 3M Sheath Wrap

Category: Low Voltage Cold Seal Splice Kits

THB M2DBOOT-3 INSUL BOOT FOR

Category: Low Voltage Motor Lead Splice Kits

NSI WAGS-750-10 EASY-SPLICE W

Category: Low Voltage Heat Shrink Splice Kits

Splice Kit, Gel-Filled, Wrap-Around, 1000V, Conductor Range: 14 AWG - 4/0 AWG, Sleeve Length: 6.0". For use as Insulation and Jacket Repair in Direct Burial and Manhole Applications.

Category: Low Voltage Gel Filled Splice Kits

Buchanan, Y-Splice Kit, Y-Splice Kits, Voltage Rating: 600 V, Amperage Rating: 70 AMP, Line Side Cable Size: 10, 8, 6, 4, 2 AWG, Line Side Crimp Type: Copper or Aluminum, Line Side Insulation Diameter: .155 - .430 IN, Load Side Cable Size: 10 - 2 AWG, Load Side Crimp Type: Copper or Aluminum, Load Side Insulation Diameter: .120 - .430 IN

Category: Low Voltage Direct Burial Splice Kits

3M 8423-6P COLD SHRINK TUBE

Category: Low Voltage Direct Burial Splice Kits

EASY-SPLICE WRAP-AROUND 4/0 4IN

Category: Low Voltage Gel Filled Splice Kits