"terminal blocks"

ALR CBR-4-4-A 4 LEG BREAKOUT BOOT

Category: Low Voltage Motor Lead Splice Kits

RCH HVS-502 775314-000 SPLICE KIT

Category: Low Voltage Heat Shrink Splice Kits

RCH GHFC-1-90 COVERS

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Direct Burial Roll-On Splice Sleeve for 8 to 2/0 AWG, 1000 Volt, Black

Category: Low Voltage Direct Burial Splice Kits

easy-splice Wrap-around 500 Mcm - 6 Awg Conductor Size 8"

Category: Low Voltage Heat Shrink Splice Kits

NSI ESGHS-N H-TAP GEL SPLICE

Category: Low Voltage Gel Filled Splice Kits

BUR RDM428 4 POS AL/CU

Category: Low Voltage Direct Burial Splice Kits

COLD SHRINK - 0.37

Category: Low Voltage Cold Seal Splice Kits

Easy-Splice Direct Burial Roll-On Splice Sleeve for 250 - 600 MCM

Category: Low Voltage Direct Burial Splice Kits

URD Street lighting Tap Kit (Heat Shrink), #6 Str - #12 Sol Al/Cu

Category: Low Voltage Direct Burial Splice Kits

BUR RDM628 6 POS AL/CU

Category: Low Voltage Direct Burial Splice Kits

Splice Kit, Direct Bury, 600V, Wire Range: 18 AWG to 10 AWG. Includes: (1) Splice Tube, (1) O and (1) B Connector. Color: Orange / Blue.

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice H Tap Gel Splice Cover for 6 - 2 AWG The Easy-Splice low-voltage H-Frame closure insulates and seals low-voltage cable-taps and splices made with H-frame compression connectors. The closure utilizes sealing gel material to seal and protect the connection from moisture ingress, corrosion and pollution. To install, simply place the connection on the closure and press the closure together. The low-voltage H-frame closure is ideal for both underground and overhead applications and is especially useful for street lighting applications. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C, 1,000 volts, UV resistant. The Easy-Splice H tap gel splice covers do NOT include connector. Approved Connectors: Blackburn WR9 Burndy YPC2A8U Homac UB214 NSi Industries WR9 T&B 63105

Category: Low Voltage Gel Filled Splice Kits

easy-splice Wrap-around 250 - 750 Mcm Conductor Size 14"

Category: Low Voltage Heat Shrink Splice Kits

Replacement Heat Shrink Sleeves, Overall Length: 9.00", Cable Insulation Diameter Range: 0.80" - 1.75"

Category: Low Voltage Heat Shrink Splice Kits

Easy-Splice Push On Gel Stub Splice Kit 250 - 500 MCM Quickly and conveniently insulate, seal and protect sub splice connections up to 1,000 Volts. The robust yet compact design is engineered to handle the harsh environment of motor and many other connection applications (including street lights). Specially formulated material provides excellent abrasion resistance, insulation value, and UV resistance. Each cap size is designed to fit a wide range of cable sizes. The expandable design keeps the cap as small as possible allowing it to expand only as much as needed to fit. Rated 105¦C. cULus listed. The kit includes one gel filled cap, one cap clamp, and one phase separator. The kits include three of each one per phase. INSTALLATION: GSS connector kits provide the fastest installation. Simply slide the cover down over the connection and snap the clamp closed. Sealant gel is already in the cap.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

3M 5735 3-CORE LOW VOLTAGE SPLICE

Category: Low Voltage Direct Burial Splice Kits

Cold Shrink Inline Splice Kit, 5730 Series, 3 or 4 Conductor, 14 - 10 AWG, 600 Volt, Includes 1 Roll of 3M Sheath Wrap

Category: Low Voltage Cold Seal Splice Kits

EASY-SPLICE WRAP-AROUND 4/0 4IN

Category: Low Voltage Gel Filled Splice Kits

3M 8423-6P COLD SHRINK TUBE

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice Push-On Gel Stub Splice Kit, 2 - 4/0 AWG, 1000 Volt, White

Category: Low Voltage Gel Filled Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG, Provides Abrasion Resistance and Moisture Ingress For 14/3 Without Ground Thru 8/3 With Ground In Direct Burial Applications

Category: Low Voltage Heat Shrink Splice Kits

RCH GHFC-2-90 GEL BOX

Category: Low Voltage Gel Filled Splice Kits