Medium Voltage Cold Shrink Splice Kits

Splice Kit, Cold Shrink, 5/8 kV, Non-shielded cable, Conductor Range: 2 AWG - 300 MCM. Maximum connector length: 4.25".

Category: Medium Voltage Cold Shrink Splice Kits

3M 5451-CI-1/0A MOLDED RUBBE

Category: Medium Voltage Cold Shrink Splice Kits

Splice Kit, Cold Shrink, 15 kV, Works with Various Types of Shielded Cables, Conductor Range: 4/0 AWG - 500 MCM. Cable Insulation Range Size: 0.84" - 1.38", Connector Requirements: Minimum O.D.: 0.69", Maximum O.D.: 1.38", Maximum Length: AL/CU 5", Copper 5.75".

Category: Medium Voltage Cold Shrink Splice Kits

7100165633 COLD SHRINK QS-III INLINE CN/JCN CABLE SPLICE KITS 5467A AND 5468A SERIES

Category: Medium Voltage Cold Shrink Splice Kits

7100165634 COLD SHRINK QS-III INLINE CN/JCN CABLE SPLICE KITS 5467A AND 5468A SERIES

Category: Medium Voltage Cold Shrink Splice Kits

3M 7694-T-150-3W INDOOR 3 CO

Category: Medium Voltage Cold Shrink Splice Kits

7100165636 COLD SHRINK QS-III SPLICE KITS 5468A(L)-20SB-AL-WF KIT

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink QT-III Silicone Rubber Skirted Termination Kit, 7640-S 7650-S & 7660-S Series, 5 - 35kV, 1.530 - 2.320 Inch Cable Insulation Diameter, Indoor/Outdoor, 1 Kit/Case

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink QS-III Silicone Rubber Splice Kit 69 kV 5488A, 5488A-JCN-XB, and 5488A-Shielded-XB, For Jacketed Concentric Neutral (JCN), Tape-Shield, Longitudinally- Corrugated (LC) Shielded, Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Power Cables

Category: Medium Voltage Cold Shrink Splice Kits

The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M. Products are supplied prestretched on a removable core for efficiency and ease of installation. 3M™ Cold Shrink Splices 5740 Series are used for single conductor, non-shielded 5/8 kV cables.Each kit is a cold shrink design and contains enough material to insulate three splices. Connectors are not included and must be ordered separately.Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

7100176268 COLD SHRINK QT-III TERMINATION KIT 7620-S 7680-S & 7690-S SERIES

Category: Medium Voltage Cold Shrink Splice Kits

7100176265 COLD SHRINK QT-III TERMINATION KIT 7620-S 7680-S & 7690-S SERIES

Category: Medium Voltage Cold Shrink Splice Kits

7100176256 COLD SHRINK QT-III TERMINATION KIT 7620-S 7680-S & 7690-S SERIES

Category: Medium Voltage Cold Shrink Splice Kits

7100165632 COLD SHRINK QS-III INLINE CN/JCN CABLE SPLICE KITS 5467A AND 5468A SERIES

Category: Medium Voltage Cold Shrink Splice Kits

7100176257 COLD SHRINK QT-III TERMINATION KIT 7620-S 7680-S & 7690-S SERIES

Category: Medium Voltage Cold Shrink Splice Kits

7100176266 COLD SHRINK QT-III TERMINATION KIT 7620-S 7680-S & 7690-S SERIES

Category: Medium Voltage Cold Shrink Splice Kits

7100165635 COLD SHRINK QS-III INLINE CN/JCN CABLE SPLICE KITS 5467A AND 5468A SERIES

Category: Medium Voltage Cold Shrink Splice Kits

MMM 5468A-18SB-AL-WF 35KV

Category: Medium Voltage Cold Shrink Splice Kits

7100176258 COLD SHRINK QT-III TERMINATION KIT 7620-S 7680-S & 7690-S SERIES

Category: Medium Voltage Cold Shrink Splice Kits

Mine & Portable Cable Splice Kit, 5/8kV Type: SHD-GC 4/0 AWG to 500 MCM, Type: MPF-GC & MPF: 250 to 500 MCM, 15kV Type SHD-GC: 1/0 AWG to 500 MCM, Type MPF-GC & MPF: 1/0 to 500 MCM. Kit Includes (3) Funnels, (1) Wrap-Around Splice Mold, (3) Rubber Mold Straps, (3) Funnel Supports, (4) Spacer Webs, (1) Strip 3M™ Three-M-Ite™ Elek-Tro-Cut™ Abrasive Cloth, 80J Grit, (13) Size C Bags, 3M™ Scothcast™ Flame Reatardant Compound 2131

Category: Medium Voltage Cold Shrink Splice Kits

3M™ Cold Shrink Shielded Splice Kit 5550 Series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire Shield or UniShield® cables. Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink Splice Kit, 3 Conductor, For Armored/Non-Armored Cable, 5/8kV, Conductor Size: 3/0 AWG - 250 MCM, Insulation O.D. Range: 0.64 - 1.01 Inch, Splice Length: 52 Inch. Kits Include Material Necessary to Make (1) 3-Conductor Splice. Connectors Are Not Included and Must be Ordered Separately. The Completed Splice is Designed for Use in Cable Trays, Weather Exposed or Direct Burial Locations.

Category: Medium Voltage Cold Shrink Splice Kits

Cold Shrink Splice Kit for Armored/Non-Armored Cable, 3 Conductor, Rated at 5/8 kV for 3/0 AWG - 1000 MCM and 15 kV for 2 AWG -750 MCM, Insulation O.D. Range 0.640 -1.010 Inch, Length 52 Inch

Category: Medium Voltage Cold Shrink Splice Kits

3MÖ Cold Shrink/Armorcast, Armored or Non-Armored Splice Kit 5551-3C-AC is for splicing 3/C, 5/8 kV shielded, armored and non-armored cables. Connectors are not included. Kits include armorcast structural material to reconstitute the cableÆs armor. Meets the requirements of IEEE 404. Each kit makes one 3/C splice. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Category: Medium Voltage Cold Shrink Splice Kits