Search results

Twin-70 raceway base, 10 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base

Category: 2-Piece Non-Metallic Raceway

Inside Corner Fitting / TG-70 Raceway, Non-Metallic, Off-White

Category: 2-Piece Non-Metallic Raceway Elbows

Transition fitting from TG to T-45. Provides a tee transition from TG raceway to T-45 and LD series size 5 and 10. Use with RF5X3 reducer fitting to transition to LD series size 3.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Inside corner fitting. Used to join sections of TG raceway at inside corners. Fittings adjust from 85° to 135° to adapt to non-square corners.

Category: 1-Piece Non-Metallic Raceway Elbows

Tee fitting. Used to join sections of Twin-70 raceway at tee intersections, Off White

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Coupler Fitting / TG70 Series Raceway, Off-White, Minimum Bend Radius for High Performance Copper and Fiber Optic Cabling Systems per TIA/EIA 568-B and 569-B Requirements

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Outside corner fitting – non-adjustable. PVC, White, Used to join sections of TG raceway at inside corners.

Category: 1-Piece Non-Metallic Raceway Elbows

Entrance End Fitting / TG-70 Raceway, Non-Metallic, Electric Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Wire retainer. Holds wires in place during installation.

Category: 2-Piece Non-Metallic Raceway Covers

Raceway Tee Fitting, TG-70 Series Raceway, Non-Metallic, Office White

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Outside corner fitting. Used to join sections of TG raceway at outside corners. Fittings adjust from 85° to 135° to adapt to non-square corners.

Category: 1-Piece Non-Metallic Raceway Elbows

End Cap Fitting / TG-70 Series Raceway, Off-White

Category: 2-Piece Non-Metallic Raceway End Fittings

Fiber spool bracket, PVC, Gray, Each piece consists of two halves that snap into base of TG raceway. Provides method to contain one meter or more of fiber slack and acts as a strain relief while maintaining a minimum 32mm bend radius. Bracket separation can be adjusted to fit the length of slack required

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Right Angle Fitting / TG-70 Raceway, Non-Metallic, Off-White

Category: 2-Piece Non-Metallic Raceway Elbows

Transition fitting. Used to transition to T-70 raceway, Off White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Backfeed Fitting, PVC, White, Allows Cable Entry Through The Back Of The T-70 Raceway

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Reducer fitting for LD raceway from size 10 to size 5. For use with LD5 and LD10 raceway. Off White

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

End cap fitting. Conduit breakouts of 1/2" for entry into raceway channel. Off White.

Category: 1-Piece Non-Metallic Raceway End Fittings

Fiber spool bracket, PVC, Gray

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Tee divider insert for TG-70 Raceway

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Base coupler fitting. Each piece includes two base coupler halves for joining sections of TG-70 base together, 10 pc.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 90° upward angle from a straight horizontal run. Used with outside vertical 90° angle fitting FOVRA2X2BL or FOVRA4X4BL to change level of straight horizontal runs. Cover included. Orange.

Category: 1-Piece Non-Metallic Raceway End Fittings

Reducer fitting for LD raceway from size 10 to size 3. For use with LD3 and LD10 raceway. For in-line terminations, use with CF10

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD5, LDPH5, and LDS5 raceway, Off White, PVC, Length 0.81 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters