Raceway - Non-Metallic

Non-Metallic, Tee Fitting, 2800 Series. Size: 5" Length, 1-1/4" Width, PVC, White.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 10.00 ft, Width 1.52 in.

Category: 2-Piece Non-Metallic Raceway

Non-Metallic, Entrance End Fitting, 5000 Series. Size: 3-9/16" Length, 5-1/16" Width, 1-15/16" Depth. PVC, Black.

Category: 2-Piece Non-Metallic Raceway End Fittings

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 3/4" cable diameter. Gray

Category: Non-Metallic Overfloor Raceway

FiberReady divided fitting to feed 40N2 Series Raceway. Includes 3/4", 1", 1 1/4", and 1 1/2" trade size Kos on back and top. Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Elbow Cover, 1-3/4", 1" Bend Radius, PVC, Ivory

Category: 2-Piece Non-Metallic Raceway Elbows

Non-Metallic, Reducing Connector, 2800 & 2700 Series. Size: 3/4" Width. PVC, White.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

For covering seam where two pieces of 5500C Cover come together. White

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

5' Nonmetallic Pancake Overfloor Raceway. Accepts up to 5/16" cable diameter. Finish - Gray

Category: Non-Metallic Overfloor Raceway

Use with 5500BD3. 5500C available in 8' (2.44m) lengths. Packed 48' (14.6m) per carton.

Category: 2-Piece Non-Metallic Raceway Covers

For mounting Ortronics Series II modules into 5507 opening. Includes two outlet identification labels with clear covers and two matching screw covers. Gray

Category: 2-Piece Non-Metallic Raceway End Fittings

For right angle turns around external corners. Finish - White

Category: 2-Piece Non-Metallic Raceway Elbows

WMD PN05L10V PN5 10FT LATCHIN

Category: 1-Piece Non-Metallic Raceway

For covering seam where two pieces of 5500BD3 Base come together White

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

T-45 entrance end fitting. With knockouts for 1/2", 3/4", 1" and 1 1/4" conduit which allows entry from ceiling or wall, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway End Fittings

Raceway Base, T-70 Series, 4.07" x 1.77" x 8', Off White, Tamper Resistant

Category: 2-Piece Non-Metallic Raceway

Non-Metallic Surface Raceway, One-Piece, Hinged, Light Gray, Type LD5, 1.01 Inch Wide x 0.60 Inch High x 8 Feet Long

Category: 1-Piece Non-Metallic Raceway

Right angle fitting for use with LD10 raceway, International Gray, ABS, Length 2.5 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 8.00 ft, Width 1.02 in.

Category: 2-Piece Non-Metallic Raceway

T-45 electrical bracket and box for installation of rectangular style electrical outlet.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, White, PVC, Length 6.00 ft, Width 1.02 in.

Category: 2-Piece Non-Metallic Raceway

HellermannTytonGÇÖs low voltage raceway (TSR) is a one piece, non-metallic, adhesive backed, latching raceway designed to aesthetically organize and route communications wires, including high speed UTP cable and fiber optic cable, from the telecom room to the work area. Type is TSR2-8A and Color is White (WH).

Category: 1-Piece Non-Metallic Raceway

Tee fitting for use with LD10 and LDPH10 raceway, International Gray, ABS, Length 4.73 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Inside Corner Fitting / LD3, LDPH3 & LDS3 Raceway, Electric Ivory, Non-Metallic, Power Rated to 600 Volts

Category: 2-Piece Non-Metallic Raceway Elbows