Raceway - Non-Metallic

Office Furniture Raceway Spill Over FittingSpill-over fitting. Allows transition from office furniture raceway run horizontally along partition wall to office furniture vertical raceway in one location. Adjustable fitting maintains 1in minimum bend radius of cabling and works with various panel wi

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway Two Cubicle Drop Bypass FittingTwo cubicle drop bypass fitting. Allows the transition from office furniture raceway run horizontally along partition wall, around existing furniture pole, to office furniture corner raceway mounted vertically in two cubicles at the intersection of partit

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway Mid Panel Tee FittingMid-panel tee fitting. Used to connect communication pole to office furniture raceway run horizontally along partition wall. Supplied with adhesive tape.Note: not intended for use at intersection of furniture panels. Medium Tone.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Desk Mount BoxDesk mount box. Box accepts office furniture snap-on faceplates as well as 70mm NEMA standard screw-on faceplates. Designed for use with OFVR5

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Inside Center FInside corner fitting. Used to join sections of office furniture raceway at inside corner. Supplied with adhesive tape. Office Gray.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway Outside CornerOutside corner fitting. Used to join sections of office furniture raceway at outside corner. Supplied with adhesive tape. Office Gray.

Category: 1-Piece Non-Metallic Raceway Elbows

Office Furniture Raceway 4 Way Cross FitCross fitting. Used to join sections of office furniture raceway at four corners. Supplied with adhesive tape, Medium Tone.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Raceway One Cubicle Drop FittingOne cubicle drop fitting. Allows the transition from office furniture raceway run horizontally along partition wall to office furniture corner raceway mounted vertically in one cubicle at the intersection of partitions. Fitting maintains 1in minimum bend

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Long Coupler FiLong coupler fitting (with base). Used to bridge office furniture raceway between panel sections. Can also be used to fill void left by spill-over fitting, when furniture partitions are reconfigured. Supplied with adhesive tape. Office Gray.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Twin-70 raceway base, 10 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base

Category: 2-Piece Non-Metallic Raceway

Tee fitting. Used to join sections of Twin-70 raceway at tee intersections, Off White

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Inside Corner Fitting / TG-70 Raceway, Non-Metallic, Off-White

Category: 2-Piece Non-Metallic Raceway Elbows

Coupler Fitting / TG70 Series Raceway, Off-White, Minimum Bend Radius for High Performance Copper and Fiber Optic Cabling Systems per TIA/EIA 568-B and 569-B Requirements

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Transition fitting from TG to T-45. Provides a tee transition from TG raceway to T-45 and LD series size 5 and 10. Use with RF5X3 reducer fitting to transition to LD series size 3.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Inside corner fitting. Used to join sections of TG raceway at inside corners. Fittings adjust from 85° to 135° to adapt to non-square corners.

Category: 1-Piece Non-Metallic Raceway Elbows

Outside corner fitting – non-adjustable. PVC, White, Used to join sections of TG raceway at inside corners.

Category: 1-Piece Non-Metallic Raceway Elbows

Entrance End Fitting / TG-70 Raceway, Non-Metallic, Electric Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Wire retainer. Holds wires in place during installation.

Category: 2-Piece Non-Metallic Raceway Covers

Raceway Tee Fitting, TG-70 Series Raceway, Non-Metallic, Office White

Category: 1-Piece Non-Metallic Raceway Tee Fittings

End Cap Fitting / TG-70 Series Raceway, Off-White

Category: 2-Piece Non-Metallic Raceway End Fittings

Fiber spool bracket, PVC, Gray, Each piece consists of two halves that snap into base of TG raceway. Provides method to contain one meter or more of fiber slack and acts as a strain relief while maintaining a minimum 32mm bend radius. Bracket separation can be adjusted to fit the length of slack required

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Right Angle Fitting / TG-70 Raceway, Non-Metallic, Off-White

Category: 2-Piece Non-Metallic Raceway Elbows

Transition fitting. Used to transition to T-70 raceway, Off White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

End cap fitting. Conduit breakouts of 1/2" for entry into raceway channel. Off White.

Category: 1-Piece Non-Metallic Raceway End Fittings