Search results

Fuse Rejection Kit, Safety Switch, R Fuses, Series F5 - F6, 30 Amp / 600 Volt AC, 60 Amp / 240 Volt AC

Category: Panelboard Replacement Keys & Trim Locks

1-Gang Toggle Device Switch Wallplate, Standard Size, Material: 302/304 Stainless Steel, Device Mount - Color: Stainless Steel.

Category: 1-Gang Toggle Switch Wallplates

Strain Relief Straight Liquidtight Cord Connector, 1/2 IN, .125 To .275 IN Openings, Nylon, Black

Category: Straight Non-Metallic Cord Grips

Load Center, Main Lug Only, 100 Amp, 120/240 Volt AC, 6 Space, 12 Circuit, 1 Phase, NEMA 1, Surface Cover, with Door

Category: 1-Phase Main Lug Aluminum Bus Load Centers

Contact Block, Hermetically Sealed, Power Reed, 30mm, 1 Normally Open, 1 Normally Closed, 3 Amp, 120/240 Volt AC

Category: 30mm Contact Blocks

IEC Contactor, TeSys Deca, Non-Reversing, 18 Amp, 10 Horse Power @ 480 Volt AC, 100kA SCCR, 3-Phase, 3 Normally Open Contacts, 24 Volt DC Coil, Open Style

Category: Starter & Contactor Replacement Coils

Power Block Cover, Screw-On, 0.10 Inch Thick, Non-Metallic, Black, 3-Pole

Category: Non-Insulated Connector Block Covers

Pull Box, Type 1, Screw Cover, Size/Dims: 30" x 30" x 8", Material/Finish: Steel/Gray, No Knockouts.

Category: Screw Cover NEMA 1 Junction Boxes

Decora/GFCI Wallplate, 1-Gang, Stainless Steel, Standard Size

Category: 1-Gang Decora Wallplates

50 Amp, 1-Pole, QO Type, Plug-On Circuit Breaker, 10 kAIC, 120/240 VAC.

Category: Residential 1-Pole Circuit Breakers

3 PHASE RELAY 250V 5AMP RM17

Category: Programmable Relays

Square D,THERMAL UNIT,40C ambient rated,600VAC,Dependant on overload relay,For use in melting alloy thermal overload relays,Manual,NEMA Overload relays,Schneider Electric,Standard Trip- Class 48,Thermal - Melting Alloy Thermal Unit

Category: Heater Elements - SQD A/B Series

(4) 12 AWG Conductors, SOOWA type, Copper Conductor, Stranded, CPE Jacket, Yellow Mustang, Rated up to 105°C, 600V, 250 ft. Reel, O.D.: 0.650"

Category: 105° Rated SOOW Portable Cord

8536SBA1V02CG122P51

Mersen DFC dead-front fuse covers snap on to individual fuses installed in fuse blocks, covering exposed live clips and terminals and reducing accidental contact by personnel. They are sized to fit class G, H, J, K, R, CC or midget fuses for increased safety and optional open-fuse indication. All DFC dead-front covers are reusable when a fuse is replaced - simply detach from the open fuse and re-attach to the new replacement fuse. On indicator models an orange indicator light will illuminate to indicate an open fuse 600 Volts 100 amps Class H-K-R w/indicator series.

Category: Fuse Covers