Search results

Non-Metallic, 2-Gang, Device Bracket, 5400 Series. Size: 6" Length, 5-5/32" Width. PVC, Ivory.

Category: 2-Gang Raceway Device Brackets & Plates

Raceway 2400 Series Transition Fee Fitting, Steel, Eliminates Need To Offset 2400 Series Raceway When Connecting with Surface Panel Boxes. Has 3/4" and 1" Concentric Trade Size KOs with 1" Trade Size KO Elongated So Adjustment From Surface To Center of Bushing Is 1" (25mm) Minimum To 1 5/8" (41mm) Maximum. Has Twistouts For Transition To 1500 and 2600 Pancake Raceways.

Category: Metallic Overfloor Raceway Connectors & Adapters

Non-Metallic, Latching Raceway, 2900 Series. Size: 8' Length, 1-1/2" Width, 3/4" Height. PVC, White. 8=1 stick

Category: 1-Piece Non-Metallic Raceway

Cover Cutter for 4000 & 6000 Series Raceway Cover.

Category: Raceway Tools

Non-Metallic, Blank Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Steel, FiberReady 2" Radius Full Capacity Internal Elbow, 4000 Series. Size: 3-3/4" Length, 1-3/4" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Steel, Internal Corner Coupling, 2000 Series. Size: 1-1/2" Width, 1-1/2" Length. One Fiber Bushing.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Wire Connector, Pressure Type, 12 - 14 AWG, Maximum 4 Conductors

Category: Plugmold Wire Connectors

Conduit Housing Assembly, 1-1/2", Use On 8AT, 8ATC, and 8STC Series Devices.

Category: Recessed Floor Box Service Fittings

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. Finish - Brass

Category: Square / Rectangle Recessed Box Covers

Series 2000 Flat Elbow Fitting, Non-Metallic, White, Two Couplings Included

Category: Plugmold Elbows

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Lid area is flush with the finished floor, no cutouts provided. Finish - Nickel

Category: Square / Rectangle Recessed Box Covers

Non-Metallic, 90° Flat Elbow, 2300 Series. Size: 4-3/16" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Multi-Service Assembled Poke-Thru Device Communication Adapter, For (2) 3/4 Inch Conduit Connectors, Non-Metallic

Category: Poke-Through Mounting Plates

Steel, Base & Cover, V2400 Series. Size: 5' Length, 7/8" Height, 1 29/32" Width, Ivory.

Category: Small 2-Piece Metallic Raceway Bases & Covers

Steel, Wire Clip, ALA4800 Series.

Category: Metallic Raceway Clips & Couplings

Aluminum, Cover Plate with Holecut, ALA3800 Series. Size: 2-3/4" Length, 1-3/4" Width.

Category: Large 2-Piece Metallic Raceway Cover Plates

Steel, Supporting Clip, 52000 Series. Size: 2". Ivory.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Steel, Base and Cover, 1500 Series. Size: 10' Length, 1-9/16" Width, 11/32" Height. Includes: 9/32" Mounting on 8" Centers. .040" Galvanized Steel

Category: Metallic Overfloor Raceway

Service Box Plate, Metallic, Type: Duplex Receptacle Opening (One Side)

Category: Recessed Floor Box Service Fittings

Non-Metallic, 1-Gang, Extra Deep Device Box, 2300 Series. Size: 4-3/4" Height, 3" Width, 2-3/4" Depth. PVC, White.

Category: 1-Gang Raceway Device Boxes

Steel, 2-Gang, Alarm Device Box, 500, 700 Series. Size: 2-3/4" Depth. Ivory.

Category: 2-Gang Raceway Alarm Boxes

Steel, Base, 6000 Series. Size: 120" Length, 4-3/4" Width, 4' Height. Ivory.

Category: Large 2-Piece Metallic Raceway Bases

Two-compartment Pole. Nominal Material Thickness .040" (1.0mm). Ivory Boot Base.furnished Unwired Without Outlets. Mounting Hardware, Entrance End Plate And Ceiling Trim Plates Furnished. Length: 10' 5" (3.2m). Rs Adapt To Yourcurrent Or Future Work Environments.

Category: Steel Power Poles