Search results

Non-Metallic, 90° Flat Elbow, 2800 Series. Size: 2" Length. PVC, White.

Category: 1-Piece Non-Metallic Raceway Elbows

Steel, Junction Box. 1500 Series. May Be Used as a Cross, Tee, or Elbow. Base has 1/2" and 3/4" Trade Size Concentric Kos. Cover has 1/2" Trade Size KO. Two 1500WC Wire Clips Included.

Category: Round Raceway Junction Boxes

Steel, Entrance End Fitting, 3000 Series. Size: 2" Height, 2-1/8" Width. Includes: Concentric: 1/2", 3/4" and 1" Trade Size KOs. Ivory.

Category: Small 2-Piece Metallic Raceway End Fittings

Steel, Female Conduit Connector, 500, 700 Series. Size: 3/4". Galvanized, Ivory

Category: Metallic Raceway Connectors & Adapters

Duplex Cover Plate with Flip Lid, Size: 4-1/4 Inch, Aluminum

Category: Round Recessed Box Covers

Steel, Flush Plate Adaptor, 2000 Series. Size: 4-1/2". Includes: 1/2" Threaded Stud, Toothed Lockwasher, Conduit Bushing. Ivory.

Category: Small 2-Piece Metallic Raceway Connectors & Adapters

Steel, External Elbow, 4000 Series. Size: 4-1/8" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

Non-Metallic, 2-Gang, Device Mounting Bracket, 4000 Series. Size: 6" Length. Ivory.

Category: 2-Gang Raceway Device Brackets & Plates

Steel, Seam Clip, 4000 Series. Galvanized.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, Cover Clip, 2300 Series. Size: 2" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Non-Metallic, 90° Flat Elbow, 800 Series. Size: 2-1/2" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Rectangular Floor Box Cover, 1-Gang, Type; Single Receptacle, Flip-Lid, Brass

Category: Square / Rectangle Recessed Box Covers

Non-Metallic, Flush Dual RJ11/RJ45 Connector Faceplate, 5500 Series. Size: 4-1/4" Length, 1-7/8" Length. PVC, Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Complete with prewired 15A quad receptacle can be wired as standard or isolated ground. Flush poke-thru-style flanges available in a variety of colors/finishes. Slide covers match painted flange colors. Aluminum and brass covers shipped with black slide covers. Brass flange also available with nonmetallic brass-color slide holder. Die-cast aluminum construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu.cm) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Black

Category: Round Recessed Box Flanges

.040" (1.0mm) steel, 10' (3m) lengths. Packed ten 10' (3m) lengths per carton. Ivory

Category: Small 2-Piece Metallic Raceway Bases

USB PLUGMOLD 5FT WHITE

Category: Dual Circuit Steel Plugmold

Flush polycarbonate power - single duplex. 15A, 125V receptacles included. Black

Category: Square / Rectangle Recessed Box Covers

Two equal compartments - Base accepts single or Twin Snap Cover. 5400 Series raceway is available in 8' (2.4m) lengths with pre-punched mounting holes, packed 48' (14.6m) per carton. White

Category: 2-Piece Non-Metallic Raceway

.040" (1.0mm) steel. Divided into two compartments (1/3 and 2/3 capacity). Packed ten 10' (3.0m) lengths per carton. Fog White

Category: Small 2-Piece Metallic Raceway Bases

Non-Metallic, Internal Elbow, 2700 Series. Size: 1-1/4" Length. PVC, Ivory.

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, Cover Clip, 5400 Series. Size: 5-3/32" Length, 3/4" Width. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Non-Metallic, Entrance End Fitting, 800 Series. Size: 4-1/4" Length, 1-7/16" Width, 1-1/2" Height. PVC, Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Non-Metallic, 90° Flat Elbow, 800 Series. Size: 2-1/2" Length. PVC, White.

Category: 2-Piece Non-Metallic Raceway Elbows

Prewired Poke-Thru Device, 4 Inch Diameter, Dual Service, Includes: (1) 20 Amp Duplex Receptacle, (1) 42A Device Plate, (1) 4MAAP Device Plate, Aluminum/Gray

Category: Assembled Poke-Through Units