Search results

Blank Flanged Cover Assembly. Die-Cast Aluminum. Color: Nickel. For use with: Tile, Carpet. Origin: USA

Category: Square / Rectangle Recessed Box Covers

Closes off open end of raceway. Finish - Anodized Aluminum

Category: Small 2-Piece Metallic Raceway End Fittings

Wmd 40n2b08v Nm Raceway Base

Category: 2-Piece Non-Metallic Raceway

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

Six rear outlets, 15A, 6' (1.8m) cord. Receptacle center-to-center 1 1/2" (38mm).

Category: General Duty Power Strips

Recessed Floor Box, 4-Gang, Depth: 3-1/2 Inch, 3/4 - 2 Inch Conduit Openings, Steel

Category: Recessed Compartment Boxes

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Black

Category: Assembled Poke-Through Units

"For 881 PVC Floor Box. Kit complete 897CTCBS with prewired 20A duplex receptacle (receptacle can be wired as standard receptacle or Isolated Ground), flange and slide holder, 881ADP Adapter, and 881DIV Divider. Includes Wiremold CM Series Open System unloaded adapters, Ortronics TracJack adapters and 2 TechChoice Cat 5e modular jacks. Modular jacks sold separately. CAUTION: Not for use on concrete pours less than 4 1/2"" (114mm) deep.Not for use when concrete is the finished floor. Use only for tile, carpet, or wood covered floors. NOTE: For carpet or tile installations. All cover plates are furnished with gasket and three screws. The 895P Polycarbonate Series Cover Plates must be field modified for dual service."

Category: Poke-Through Cover Assemblies

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with one (1) duplex receptacle mounting plate, and one (1) communication mounting plate. Other device plates sold separately. 2-Compartment Shallow Stamped Steel Recessed Box w/tunnel,1 Duplex Bracket and 1 Comm Bracket

Category: Recessed Compartment Boxes

One-gang device plate in standard (D) widths.

Category: 1-Gang Raceway Device Brackets & Plates

For closing open end of DS4000B Raceway Base. Has two 3/4" and 1" trade size KOs. Designer Gray

Category: Large 2-Piece Metallic Raceway End Fittings

3' [914mm] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] steel housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings. Each USB module provides 2 ports with 2.4 Amps of shared charging. Please note the charging load on one module will not affect the charging performance of the other USB modules in the product.

Category: Single Circuit Steel Plugmold

6' Plugmold Multioutlet System with 6 single outlets. 304 Stainless Steel

Category: Single Circuit Steel Plugmold

For use in either concrete or wood floors. Fully adjustable with tunnel compartment. Supplied with two (2) duplex mounting plates, two (2) communication mounting plates (RFB62A), and (2) blank mounting plates. Other plates sold separately.

Category: Recessed Adjustable Floor Boxes

Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Flanges available painted in gray (GY), black (BK), ivory (VY). Flanges also available in plated brushed brass (BS) and brushed aluminum (AL). Slide covers match the painted flange colors, gray, black, ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum color slide holder (AA). Includes Wiremold Open System unloaded inserts. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC7 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC7 Assembled Unit-Aluminum Finish Flange Black Slide Holder, 20A Duplex Standard or IG and Cat 6 Connectors

Category: Assembled Poke-Through Units

Wiremold V700 Series Raceway Grab n Go Kits eliminate the hassle of ordering and locating the accessories and fittings needed for quick raceway installations. Each Grab n Go Kit includes an assortment of the standard raceway fittings, fasteners and accessories needed to complete a typical installation. Fittings are separated by part number into individual compartments in a convenient reclosable container that fits most service truck systems.

Category: 1-Piece Metallic Raceway Kits

W-mold Wsc42-6 6 Gand Box W/d ividers

Category: Work Surface Power Centers

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Double Duplex Device Plate, For Installing a 15A and 20A Duplex Receptacles or Duplex Style Communication Devices. Accepts 106 Frame.

Category: Large 2-Piece Metallic Raceway Cover Plates

Seam Clip Fitting, DS4000 Series, Steel, Gray, Covers Seam Where Two Sections of DS4000C Come Together.

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

6' Plugmold Multioutlet System with 8 single outlets 9 inches apart, GB Finish - Ivory

Category: Single Circuit Steel Plugmold

WMD XPP2G30CD-BK

Category: Assembled Poke-Through Units

Steel, Prewired Plugmold, Tamper-Resistant, 3' Long, White, (6) Outlets, GFISteel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: White. Outlets (6") O/C: Total Outlets: (6) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Perfect for eliminating countertop clutter and creating a more functional kitchen counter space in spaces with shorter cabinet sections. This Modular Track is 10" in length but can be cut down to 8" to fit a smaller cabinet section, allowing you to create an under-cabinet system custom-designed for your kitchen. Enables direct wire connection to wiring behind the wall. Cannot be connected to any other modular track segment. The Short Modular Track includes one outlet module and can support one Linear LED light. Tamper-resistant outlets feature patented shutter-system, keeping children safe by preventing them from pushing small objects into the outlets. Features a sleek, titanium finish.