Search results

Includes single-gang box, one 15A, 125V tamper-resistant receptacle, and brass cover with two screw plugs. For hole cut dimensions, see installation instructions sheet. Box Dimensions: 2 1/8" W x 3 3/4" L x 3 7/8" D (54mm W x 95mm L x 98mm D) Device Plate: 3 1/8" W x 4 15/16" L

Category: Assembled Recessed Gang Boxes

For mounting devices 24" (610mm) on center using 3027AE, 3033JE, 3036HE, 3040CE, 3043, 3046, 3048R and 3051LE Series Device Plates. Gray

Category: Small 2-Piece Metallic Raceway Covers

5 ' Steel Plugmold Multioutlet Strip with 5 single outlets spaced 12"

Category: Single Circuit Steel Plugmold

Internal Elbow for Aluminum Raceway, 90°, AL3300 Series

Category: Plugmold Elbows

WMD PN10L10-W

Category: 1-Piece Non-Metallic Raceway

Accepts 15A and 20A duplex receptacles and 106 style frame. Includes combination twistouts for either modular furniture adapter or two Keystone RJ45s. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Ivory

Category: 4-Gang Raceway Box Covers

Combination Carpet and Tile Flange, 2-Gang, Powder-Coated Aluminum, Nickel

Category: Square / Rectangle Recessed Box Flanges

Flangeless Blank Cover Assembly, No Cut-Out, Color: Black, Material: Die-Cast Aluminum

Category: Square / Rectangle Recessed Box Covers

.040" (1.0mm) steel, 10' (3m) lengths. Packed ten 10' (3m) lengths per carton. Fog White

Category: Small 2-Piece Metallic Raceway Bases & Covers

Internal/External Elbow / 4000 Series Raceway, Steel, Gray

Category: Large 2-Piece Metallic Raceway Elbows

WMD EFB45-TS EVO 45 TILE SHIM

Category: Recessed Floor Box Service Fittings

Floor Box Cover Kit, Includes Flange and Slide Holder, (1) Pre-Wired 20A Duplex Receptacle, Brass

Category: Round Recessed Box Covers

6063-T5 extruded aluminum, satin anodized finish, .075" (1.9mm) wall thickness. This cover is packed four 10' (3m) lengths per carton.

Category: Plugmold Covers

Extruded .050" (1.8mm) thick aluminum. Packed eight 5' (1.5m) lengths per carton.

Category: Large 2-Piece Metallic Raceway Dividers

Complete cover and stem assembly with combination 1 1/4" and 2" trade size threaded conduit openings and closure plugs. Finished color black

Category: Assembled Poke-Through Units

Required to fill unused openings. White

Category: Blank Communication Modules For Metallic Raceway

Die-cast aluminum cover assembly. Cover assembly is available in the following powder coat finishes: black (BK), gray (GY), nickel (NK), brass (BS), bronze (BZ) and aluminum (AL) as well as plated brass (PB) and satin chrome (SC). 10CTC Series Cover Assemblies designed for use with 10STC and 10STCP Poke-Thru Stem Assemblies.

Category: Round Recessed Box Covers

W-mold 30tc215v 1 Compart/ 15'

Category: Steel Power Poles

Device plate that will accept up to four (4) Extron Electronics MAAP style plates in OFR48-2 and OFR48-4 Device Boxes.

Category: Metallic Overfloor Raceway Device Plates

Available in standard width. Provided with bezel to accept up to three (3) dual Wiremold CM Series Open System communication modules or Pass and Seymour Activate Connectivity System inserts. Modules and inserts sold separately.

Category: 1-Gang Raceway Device Brackets & Plates

Used as a vertical corner feed drop to horizontal run of 5400 Series Raceways. Two compartments. Packaged with base and cover. MXN2A08 available in 8' (2.44m) lengths. Ivory

Category: 2-Piece Non-Metallic Raceway Elbows

Combination Carpet and Tile Flange, 2-Gang, Powder-Coated Aluminum, Brass

Category: Square / Rectangle Recessed Box Flanges

Single-gang sectional (SD) width device plate.

Category: 1-Gang Raceway Device Brackets & Plates

Connectivity cover for 25DTC Steel Tele-Power Poles

Category: Steel Power Poles