Search results

This box has a 4" (102mm) depth design and can accommodate two duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept two communication adapters for up to 12 ports of activation. Lids can be rotated 180¦ for easy orientation. Gray lids are die-cast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

6-INCH ABANDON PLUG

Category: Assembled Poke-Through Units

For branching 3000 Raceway at right angles. Three couplings included.

Category: Small 2-Piece Metallic Raceway Tee Fittings

Allows access to power and data on both sides of OFR48-4 4-Gang Device Box.

Category: Metallic Overfloor Raceway Device Boxes

Used for floor coverings greater than 3/16" (4.7mm). This tile shim allows the finished cover assembly to be flush with the finished floor. Includes one (1) 1/16" (1.6mm), one (1) 1/8" (3.2mm) and one 1/4" (6.4mm) tile shim for 9/16" (14.3mm) of upward adjustment.

Category: Recessed Floor Box Tools

Closes off unused gangs. NOTE: For RFB2 Series Floor Boxes only.

Category: Recessed Floor Box Service Fittings

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Nickel

Category: Square / Rectangle Recessed Box Covers

Poke-Thru Transition, 3 Inch

Category: Metallic Overfloor Raceway

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. NOTE: Add suffix “TR" to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. "NA" indicates North American made and complies with the Buy American Act, NAFTA, and ARRA requirements.

Category: Square / Rectangle Recessed Box Covers

Cover Plate, Powder-Coated Aluminum, 3/4" Plugs, Color: Bronze

Category: Square / Rectangle Recessed Box Covers

Cover for Poke-Thru/Finish Flange and Conduit Adapter Assembly, RC7 Series, Plugs: (1) 3/4", (2) 1/2", Painted Black, For Use with Carpet, Wood and Tile Flooring.

Category: Poke-Through Cover Assemblies

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Brushed Aluminum Finish

Category: Poke-Through Cover Assemblies

Flanged Blank Cover, Die-Cast Aluminum Assembly, Flush, Finished Floor, No Cutouts, For Use in Tile or Carpet Installation, Bronze

Category: Square / Rectangle Recessed Box Covers

W-mold G2015 6-in Gry Tee

Category: Small 2-Piece Metallic Raceway Tee Fittings

HDMI Female to Female Barrel, Wiremold Audio/Video Interface Plates (AVIP), Allow For A/V Connectivity in All Wiremold A/V Compatible Pathways. AVIP Series Device Plates are Metal And Have Screwed-Down Connectors, Which Ensure a Secure Connection that Cannot Be Easily Pulled-out or Disconnected While in Use. Available In Data, Audio, And Video Versions, AVIP Series Device Plates Help You Stay Connected in Meeting and Training Rooms, Collaboration Spaces, Or Work Areas.

Category: Snap-In HDMI Jack Inserts

Steel, Blank Cover, 500, 700 Series. Size: 2-3/8" Diameter, 1/4" Width. Includes: 1/2" Trade Size KO in Center. Ivory.

Category: Round Raceway 3/0 Outlet Boxes & Covers

Adjustable Floor Box, 3-Gang, Depth: 2-15/32 Inch, Steel, Cubic Inches: 126, (11) 1/2 Inch and (11) 3/4 Inch Conduit Openings

Category: Square Recessed Floor Boxes

Raceway Cutter for V500

Category: Raceway Tools

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Flange available in painted gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Slide covers match the painted flange colors: gray, black, and ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

Poke-Thru Cover Assembly, Surface Style, 4 Inch Diameter, Aluminum Die Cast with Black Powder Coat Finish

Category: Poke-Through Cover Assemblies

Non-Metallic, Internal Elbow, 2300 Series. Size: 2-1/2" Length. PVC, Ivory.

Category: 2-Piece Non-Metallic Raceway Elbows

Steel, 3-Gang, Combination Device Box, 500, 700 Series. Size: 1-3/8" Depth, 4-5/8" Length, 6-1/2" Width. Ivory.

Category: 3-Gang Raceway Device Boxes