Search results

Multiple Service Floor Box Cover Kit, Brass

Category: Round Recessed Box Covers

2800 Series Co-extruded design, smooth plastic finish with adhesive backing. Available in 8' (2.44m) lengths, packed 160' (48.8m) per carton. Finish - Ivory

Category: 1-Piece Non-Metallic Raceway

Aluminum floor box construction with three 1/2" trade size knockouts: two on the sides and one on the bottom. 18 cu. in. (295 cu.cm) capacity. Requires a 4" (102mm) diameter hole and overall floor depth of 1" (25mm). Assembled with scrub water gasket. For use on tile, wood, or carpet floors. Unit comes with a 15A quad receptacle and a brushed brass flange and black color device plate.

Category: Assembled Recessed Round Boxes

W-mold Nm20ig412 4' Ig crt 12" Oc Plugmold

Category: Single Circuit Non-Metallic Plugmold

Prewired snap-in 20A receptacle can be wired as standard duplexor isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details.

Category: Assembled Poke-Through Units

Steel, Entrance End Fitting, V2400 Series. Size: 2-11/16" Length, 1-7/8" Width, 2-1/8" Height. Includes: 1/2", 3/4" Trade Size KOs, 1/2" Trade Size KO. Fog White.

Category: Small 2-Piece Metallic Raceway End Fittings

AL5200 Series. Mounts commercially available GFCI or surge suppression receptacles. Finish - Anodized Aluminum

Category: Large 2-Piece Metallic Raceway Cover Plates

W-mold S4017 Internal Elbow

Category: Large 2-Piece Metallic Raceway Elbows

For installation requiring a 15A or 20 A duplex receptacle and accepts three (3) Wiremold CM@ Series communication connectivity devices. Cover includes 6A mini adapter (6A-opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

Surface Style Floor Box Cover Assembly with Insert, Material/Finish: Die Cast Aluminum/Black

Category: Square / Rectangle Recessed Box Covers

Wire Clip, Diameter: 1/2"

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

For covering unused compartments in the device bracket. Gray

Category: 1-Gang Raceway Box Covers & Faceplates

Two-compartment large capacity pole. Furnished unwired without outlets. Box ended with industry sized knockouts. Standard height 15' 2" (4.6m) (NP800C-15-2B) Finish - Anodized Aluminum

Category: Aluminum Power Poles

Wm Alds4047c Alds4000 Single

Category: Large 2-Piece Metallic Raceway Cover Plates

Diagonal 45 degree turns on same surface. White

Category: Metallic Raceway Elbows

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Brass

Category: Square / Rectangle Recessed Box Covers

This box has a 5" (127mm) depth design with an extra 2" (51mm) of width for additional wiring capacity and can accommodate four duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept at least three communication adapters for up to 18 ports of activation. Lids rotate 180° for easy orientation. Gray lids are diecast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

Two-compartment Pole. Nominal Material Thickness .040" (1.0mm). Gray Boot Base.furnished Unwired Without Outlets. Mounting Hardware, Entrance End Plate And Ceiling Trim Plates Furnished. Length: 12' 5" (3.8m)

Category: Steel Power Poles

Twelve 20a Outlets With T-Slots, 6' [1.8m] Cord. Length 77" [2m]. Receptacle Center-to-Center 6" [152mm]. 20 Amp Unit With A 20 Amp Resettable Circuit Breaker

Category: Commercial Grade Power Strips

Installs of duplex devices in divided aluminum raceway. 6" (152mm) offset divider included. Can also be used with 106 communication frames.

Category: Plugmold Covers

Four-piece power service fitting. Duplex opening both sides. Receptacles not included. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

WIREMOLD CAF3-DP1 DUPLEX PWR

Category: Recessed Floor Box Service Fittings

2" IPS to 3/4" Afterset Insert Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Includes round PVC floor box, one 15A, 125V tamper-resistant decorator style duplex receptacle, one coax F connector, one RJ45 Category 5e connector, and brass duplex opening cover plate with single flip lid.

Category: Assembled Recessed Round Boxes