Search results

In-Wall Storage Box with Flange and Cover, Allows Compatibility With Standard 3.5" Studs & 2.5" Studs, Drywall And Stud Mountable, Knockouts For Single Gang Outlets And 1-1/4", 1", & ½"Conduit, Integrated Universal Zip Tie Anchor Points, Enclosure UL 2416 Listed For Installation Of AV, IT & Communication Technology Equipment: Stores A Large Variety Of AV Components, Landscape/Portrait Installation, L: 9", H: 14.25" , D: 3.9", White

Category: Recessed Home Entertainment Boxes

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Holds four (4) Legrand AVIP or Extron Electronics MAAP devices. Device plate dimensions: 2.3" x 4.652" (58mm x 118mm).

Category: Recessed Compartment Box Device Plates

Surface style, die-cast aluminum cover assembly with one (1) 3/4" trade size screw plug opening, and one (1) concentric 2" - 1 1/4" trade size screw plug opening. Cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. 6CFFTC Series cover assemblies designed for use with 6STC Poke-Thru Stem Assemby. Includes one (1) 3/4" and one (1) 1/2" trade size conduit fittings and one (1) divider to separate devices. Gray

Category: Poke-Through Cover Assemblies

Makes a 90 degree flat turn in a raceway run. Includes four ALA01 Couplings.

Category: Large 2-Piece Metallic Raceway Elbows

W-mold G20-c2 Cord-ended Plug mold

Category: Single Circuit Steel Plugmold

Wmd 24s7212gbx99iv Plgmd 20a 72in 12in Oc Single Circuit

Category: Single Circuit Steel Plugmold

WMD PN05F06FW NM COVER CLIP P

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Unit includes one (1) 15A black tamper-resistant duplex receptacle. Unit comes with a 6' [1.83m] cord. Comes with a black powder coat finish.

Category: Assembled Recessed Countertop Boxes

Use with AMD8C Series Covers to complete installation. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Single-gang device plate that will accept up three (3) Ortronics Series II dual modular inserts. Fits in any one (1) of the three (3) gangs in the center compartment. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Non-Metallic, Flexible Corduct. 1600 Series. Size: 25' Length, 3-11/32" Width, 30/32" Height. Color: Beige.

Category: Non-Metallic Overfloor Raceway

<p>Installed either before or after concrete pour to create activation from duct. 1"" height.</p>

Category: Recessed Compartment Boxes

Complete with hexagonal service head. Service head has one 3/4" trade size threaded conduit hub and five rubber grommets. The service head includes scrub water gasket. Unit is supplied with one 1 1/4" and one 1/2" trade size conduit stem to feed power and communication services. Service head is not to be used as a junction box. All power connections must be made in a junction box below (not supplied). Colors available in painted gray (GY), and painted black (BK). NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC9AFFTC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Gray

Category: Assembled Poke-Through Units

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Bronze Powder-Coat.

Category: Poke-Through Cover Assemblies

Non-Metallic, Dual RJ11/RJ45 Connector Faceplate, 5500 Series. Size: 4-1/4" Length, 1-7/8" Width. Includes: (1) Opening, (1) KO. PVC, Light Gray.

Category: 1-Gang Raceway Box Covers & Faceplates

Accepts two Extron Electronics AAP single space modules.

Category: 2-Gang Raceway Box Covers

Cover Plate, Powder-Coated Aluminum, Color: Nickel

Category: Square / Rectangle Recessed Box Covers

Installs commercially available straight blade and locking single receptacles with face diameters of 1.56"-1.58" (39.2mm-39.3mm).

Category: Large 2-Piece Metallic Raceway Cover Plates

Connects equipment grounding conductor to provide an additional ground to raceway.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Nonmetallic Plugmold 6' in length with receptacles spaced 12" on center. Nonmetallic Plugmold has a textured ivory finish. For use with 20 amp circuit. Finish - Ivory

Category: Single Circuit Non-Metallic Plugmold

WMD 10PPS 10IN PREPOUR SLEEVE

Category: Assembled Poke-Through Units

2400 Series Right angle turns on same surface. Finish - Fog White

Category: Small 2-Piece Metallic Raceway Elbows

Duplex Power Plate with Flip Lids, Color: Gray

Category: Round Recessed Box Covers