Search results

Device Cover, Configuration: Blank, 1-Gang, Material: PVC Coated Aluminum, Gasket Included.

Category: PVC Coated FS & FD Device Box Covers

Enclosure, J Series, Hinged, Padlock Latches, 14 x 7 x 5 Inch, Fiberglass/Gray

Category: Fiberglass Hinged Cover Enclosures

Rob-r Preyd7 2-1/2 F/f Sealin

Category: PVC Coated Type EYD Sealing Fittings

RRY PREYD16 1/2 M/F SEALING F

Category: PVC Coated Type EYD Sealing Fittings

Conduit Hub with Ground Screw, Size: 1/2 inch, Material: PVC Coated Aluminum.

Category: PVC Coated Conduit Hubs with Ground

JW Series Enclosure, Flush Bonded Window, Hinged, Padlock Latches, Size/Dims: 14" x 12" x 6", Material/Finish: Fiberglass/Gray

Category: Fiberglass Hinged Cover Enclosures

JW Series Enclosure, Flush Bonded Window, Hinged, Padlock Latches, Size/Dims: 16" x 14" x 6", Material/Finish: Fiberglass/Gray

Category: Fiberglass Hinged Cover Enclosures

Panel For Enclosure, 6" x 6", N Series, Carbon Steel

Category: Enclosure Back Panels

RRY PREYD106 4 M/F SEALING FI

Category: PVC Coated Type EYD Sealing Fittings

PVC coated device boxes and covers, available in several configurations, may be used in coated conduit systems to accommodate wiring devices, to serve as pull boxes for conductors, or to allow for splices and taps in conductors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated FD Device Boxes

High Quality Hole Plug, 0.57" x 1" , Fiberglass

Category: Non-Metallic Enclosure Hole Seals

1-1/2 PULLING ELBOW LBD

Category: PVC Coated Type LB Conduit Bodies

PVC Coated Conduit Outlet Box, Expolsionproof, (3) 1 Inch Hubs, Cover Opening 3 Inch, Neoprene O-Ring, Internal Ground Screw, Aluminum Cover

Category: PVC Coated Explosion-Proof GUAT Conduit Outlet Boxes

Non-Metallic Drain Vent, 0.57" x 1", Type: 4X Enclosure

Category: Enclosure Non-Metallic Ventilators

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

Threaded Conduit Nipple, 3/4 Inch x 3 Inch, Aluminum, For use with Rigid Threaded Conduit

Category: Aluminum IMC Conduit Nipples

Rob-r Prlb87sa 3 Al Form 7 Lb

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prstag8 3 Al Knockout H

Category: PVC Coated Conduit Hubs with Ground

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Rob-r Prsta7 2-1/2 Al Knockout

Category: PVC Coated Conduit Hubs

Rob-r Prunf705sa 2-1/2 Female-female

Category: PVC Coated Female-Female Unions

Rob-r Prlbd10900 4 Pulling El

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prt97 3-1/2 Form 7 T Fitting

Category: PVC Coated Type T Conduit Bodies

PCP PM4Q9100T 1 90 LT CONNECTOR

Category: 90 Degree PVC Coated Type LT Connectors