Search results

Tmax, Breaker, Molded Case, Frame Size XT4, 250 Amp, Thermal Magnetic Fixed Trip, 3-Pole Fixed + Front Flat Terminals, 25kAIC @ 600VAC, 65kAIC @ 480VAC

Category: 600V Rated Molded Case Circuit Breakers

THB A483 NON-INS RECT RING TE

Category: Non-Insulated Ring Tongues

Miniature Circuit Breaker, 1-Pole, 4 Amps, 480Y/277V AC. C-Curve. 10 kAIC. ST200M Series. Supplemental Protectors. UL 1077, CSA 22.2.

Category: 1-Pole DIN Rail Mount Circuit Breakers

Terminal Block With Binding Screw, 3-Pole, 350 MCM, 300 Amp, 600 Volt, Black

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

NEXT4H 250 TMF 200-2000 3P F F UL/CSA

Category: 600V Rated Molded Case Circuit Breakers

ABB SWM20 M20 METRIC THREAD SEALING WASHER

Category: Cable Gland Entry Thread Seals

ABBTB KXTBPLLOPCL PLL XT1-XT3 PADLOCKS DEVICE OP/CL

Category: Molded Case Circuit Breaker Locking Devices

16MM 90D ELBW M20 MALE FTNG BLB

Category: ENT 90° Stub Downs

Designed for commercial and industrial applications where safety, high performance and continuity of service are essential. Listed to UL standard 98 enclosed and dead front switches. Suitable for use as service equipment when installed in accordance with the National Electrical Code. Certified to CSA standard 22.2 no. 4-04 enclosed and dead front switches. Meets or exceeds NEMA KS1 standard for enclosed switches, type HD. Fusible and non-fusible switches available (consult BuyLog for interrupt ratings). Quick-make, quick-break mechanism. 60/75 C conductor rating. Full cover interlocks. TH3365

Category: 3-Pole 600 Volt Fused Heavy Duty Safety Switches

Liquidtight Connector, 45°, 2 Inch, Non-Metallic, For Type B

Category: 45 Degree Non-Metallic Liquidtight Flex Connectors

PowerMark Gold convertible load centers arrive as main lug, but have the capability to have a main breaker installed. All ABB load centers are rated up to 60 degree/75 degree centrigrade and is suitable for use with service entrance equipment when installed in accordance with electrical code. The TLM4222RCU features space for 42, 1" breakers, a 225 A bus ampere rating, a copper bus, and an outdoor suitable enclosure.

Category: 1-Phase Convertible Copper Bus Load Centers

Gray plastic, long type terminal shroud for 3 pole switches

Category: Disconnect Switch Terminal Shrouds

Transformer, Dry Type, 1.5 KVA, 480 - 120/240, NEMA 3R

Category: 1.5 KVA Dry Type Transformers

Single Lever Locking Panel Base for Use with B10, V3 and DD42 Series

Category: Industrial Rectangular Connector Panel Mount Bases

Contactor, Lighting, 30 Amp, 10 Normally Open, Contacts, 120 Volt AC Coil, Open

Category: Open Lighting Contactors

Enlarger, Female 3/4 Inch to Male 1 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Conduit Enlargers

Liquidtight Strain Relief Cord Connector, 2-1/2 Inch, Straight, Cord Range 2.350 to 2.565 Inch, Malleable Iron

Category: Straight Die Cast Zinc Cord Grips

Breaker, Molded Case, 40 Amp, 600 Volt AC, 18 kAIC, 3-Pole, Thermal Magnetic, with Lugs

Category: 600V Rated Molded Case Circuit Breakers

Breaker, Spectra Series, Mounting Load Base Kit, 400 - 1200 Amp

Category: Molded Case Circuit Breaker Operating Handles

3 Inch Non Metallic Push Penny, Polyethylene for Use with Rigid/IMC Conduit

Category: Non-Metallic Knockout Seals

PowerMark Gold convertible load centers arrive as main lug, but have the capability to have a main breaker installed. All ABB load centers are rated up to 60 degree/75 degree centrigrade and is suitable for use with service entrance equipment when installed in accordance with electrical code. The TLM612SCUD features space for 6, 1" breakers, 125 A bus ampere rating, a copper bus, an optional door for 6-8 circuit panel, and a surface enclosure.

Category: 1-Phase Convertible Copper Bus Load Centers

THB RB11-TB INS NYL FEMALE 11

Category: Female Nylon Insulated Wire Disconnects

Compression Lug, 1-Hole, Short Barrel, Copper, 1-Conductor, 6 AWG, 3/8" Stud Size, Color Coded Blue

Category: 1-Hole Copper Compression Lugs

3 Inch Form 7, LB Conduit Body, Body Material Gray Iron with Zinc Plating and Baked On Epoxy Powder Coat with BlueKote Internal Coating for Use with Rigid/IMC Conduit

Category: Type LB Iron Conduit Bodies