Search results

1 1/4NPT A/LOK ELBOW W/ LN WASHER

Category: ENT 90° Stub Downs

Other Components. Renewal Parts Non-Silver. Renewal Parts Non-Silver. Coil. G0043233

Category: Starter & Contactor Replacement Coils

GED THED124025 2P-480V-25A CB

Category: 480V Rated Molded Case Circuit Breakers

CUTOUT FUSED/TD EU OVERHEAD LOAD BREAK 7800 V 100 A PORCELAIN BODY 14000 A INTERRUPT

Category: Porcelain Fuse Cutouts

FH XT5 BREAKER MECHANISM

Category: Molded Case Circuit Breaker Operating Mechanisms & Handle Shafts

XT4N 250 EKIP LSI IN=150A 3P F F UL/CSA

Category: 600V Rated Molded Case Circuit Breakers

LUG KIT

Category: Load Center Lug Kits

Time Delay Relay, AC, 4 Form C 4PDT-CO, 10 A Contact Rating, Chassis Mount, 75 °C [167 °F]

Category: DIN Rail Mount Timing Relays

REPLACEMENT FRONT FOR TLM3220CCUW

Category: Copper Bus Load Center Covers

Breaker, 3-Pole, 20 Amp, 120/240 Volt AC, Miniature, DIN Rail Mount, 10 kAIC, D Trip Curve, 2 per Package

Category: 3-Pole DIN Rail Mount Circuit Breakers

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 30 - 43. Type LPJ-SP or AJT Maximum Fuse: 70. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

GED SPUV120ACR UNDERVOLT RLS MOD

Category: Molded Case Circuit Breaker Undervoltage Releases

PRO-STK XT4 3 POLE M BKR KIT W/BRKR

Category: Panelboard Main Breaker Kits

Reducing Bushing, Threaded, 3 Inch x 2 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Iron Alloy Reducing Bushings

Reducing Bushing, 2 x 1 Inch, Threaded, Steel With Zinc Finish, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

Watertight Connector for Oval Cable, Hub Size 3/4 Inch, Die Cast Zinc Body with Neoprene Bushing, Oval Cable Range Maximum .500 X .750 Inch, Minimum .375 X .625 Inch

Category: Zinc Die Cast NM Cable Connectors

Liquidtight Strain Relief Connector, 90 Degree, 3/4 Inch Diameter, 0.125 - 0.250 Cable Opening, Malleable Iron

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Female Disconnect, Nylon Fully Insulated, 22-16 AWG, .25"x.032" Tab, Red

Category: Female Nylon Insulated Wire Disconnects

Sealing Locknut, 2 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

EMT Set Screw Connector, Insulated, 1-1/4" Diameter, Steel With Zinc Finish, For Use With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Knockout Plug, 2 Inch Diameter, Thermoplastic, For Use With Rigid/IMC Conduit

Category: Non-Metallic Knockout Seals

Flex Connector, Tite-Bite Series, Straight, Nylon Insulated,1-Screw Clamp, 2-1/2 Inch Diameter, Steel, For Use With Flexible Metal Conduit/Armored Cable

Category: Single Barrel Saddlegrip MC / AC Connectors

Sealing Locknut, 1/2 Inch, Threaded, Steel, For Use With Rigid/IMC/EMT Conduit

Category: Gasketed Conduit Locknuts

Female Reducing Bushing, 1-1/4 Inch x 3/4 Inch, Material: Malleable Iron, For Use With Rigid/IMC Conduit.

Category: Iron Alloy Reducing Bushings