Search results

Category 6A, RJ45, 8-position, 8-wire spring shuttered universal jack module, Blue.

Category: Snap-In Cat 6A Jack Inserts

Fixed diameter cable clamp, heavy duty, #10 screw (M5), 1.12" (28.5mm) bundle, white, standard package.

Category: Cable Clamps & Clips

Category 5e, RJ45, 8-position, 8-wire, 28/30 AWG universal module, Black.

Category: Snap-In Cat 5e Jack Inserts

Butt Splice, 12 - 10 AWG

Category: Non-Insulated Butt Connectors

Thermal transfer raised panel component label, 3.79" W x 0.30" H,blue, 1 label/row, 500 pc. package quantity.

Category: Permanent Labels

Module supplied with one LC (keyed K slate) SFF duplex fiber optic adapter with zirconia ceramic split sleeves.

Category: Snap-In Blank Inserts

Keyed, Category 6A, RJ45, 10 Gb/s, 8-position, 8-wire universal module. Green.

Category: Snap-In Cat 6A Jack Inserts

Fixed diameter cable clamp, heavy duty, #10 screw (M5), 1.50" (38.1mm) bundle, white.

Category: Cable Clamps & Clips

Mini Com Classic series single gang horizontal faceplate accepts two Mini-Com® Modules, Off White

Category: Snap-In Wallplates

OM1 2 fiber 3mm jacket patchcord, riser (OFNR) rated, SC duplex to SC duplex, std IL

Category: Fiber Optic Patch Cords

Keyed LC FAP loaded with eight LC (keyed H – aqua) duplex fiber optic adapters with zirconia ceramic split sleeves.

Category: LC Fiber Distribution Plates

Fiber Indoor Armored (Interlocking Aluminum) Cable, Plenum (OFCP), 50um Multimode OM4 48 Fibers

Category: Multimode Fiber Optic Cable

Category 6, RJ45, 8-position, 8-wire, 28/30 AWG universal module. Yellow.

Category: Snap-In Cat 6 Jack Inserts

Corrugated loom tubing slit wall, .50" (12.7mm) x 4000' (1219.2m), heat stabilized black nylon 6.

Category: Split Wall Loom Tubing

2 fiber OS2 patch cord, LC push pull to LC push pull, low smoke zero halogen (LSZH) rated, 16mm jacket, Standard IL 4 meters

Category: Fiber Optic Patch Cords

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in red vinyl housing. It has a tab size of 0.187 x 0.032" (4.8 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.77" (19.6 mm) long

Category: Female Vinyl Insulated Wire Disconnects

2 fiber OS2 patch cord, LC push pull to LC push pull, riser (OFNR) rated, 16mm jacket, Standard IL 25 meters

Category: Fiber Optic Patch Cords

End cap fitting for use with LDPH10 and LD2P10 raceway, International Gray, ABS, Length 1.25 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Used to seal off 1" x 5" cabinet top openings when cables are routed through the top of a cabinet. Airtight fabric and Ultra-Cinch™ Tie close top of fabric, minimizing hot air bypass around cables to improve cooling of network equipment and reduce energy

Category: Indoor Free Standing Data, Audio, & Video Enclosures

Keyed LC FAP loaded with six LC (keyed E – orange) duplex fiber optic adapters with zirconia ceramic split sleeves.

Category: LC Fiber Distribution Plates

Fiber Indoor-Outdoor Stranded Tube Cable, Riser (OFNR), 50um Multimode OM4 48 Fibers

Category: Multimode Fiber Optic Cable

Used to support the 12x4 system from existing threaded rod installations. Bracket is secured to threaded rod with two split nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps, For 5/8" Threaded Rod.

Category: Mounting Hardware & Brackets

Panduct® type FS solid wall wiring duct, 6 W x 4 H, 6' length, PVC, adhesive, light gray.

Category: 2-Piece Non-Metallic Raceway

2 fiber OM3 LC duplex to LC duplex patch cord OFNR (riser) rated, 16mm jacketed cable Std IL 30 meters

Category: Fiber Optic Patch Cords