Search results

Panduit® Pan-Steel® I-Series Custom Strapping can be cut to meet your many project needs. Built with 316L Epoxy Polyester Coated stainless steel with a fold-over lock, it maintains a safe, secure connection despite severe weather, intense UV rays, high vi

Category: Cable Straps

Latching flat cable mount, 2" (50.8mm) cable width, gray, standard package.

Category: Cable Tie Bases

Panduct® flush cover type D round hole wiring duct, 3 W x 4 H, 6' length, PVC, black, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Power rated drop ceiling/entrance end fitting for use with LD3, LDPH3, LDS3, LD5, LDPH5, LDS5, LD10 and LDPH10 raceway. Use CA3 or CA5 adapters for LD3/LDPH3/LDS3 and LD5/LDPH5/LDS5 profile raceway, adapters not required for LD10 and LDPH10 raceway, Electric Ivory, PVC, Length 4.1 in.

Category: 1-Piece Non-Metallic Raceway End Fittings

Parallel Splice, 22 - 18 AWG

Category: Non-Insulated Butt Connectors

Compression Lug, Copper, 1-Hole, Flared Barrel, 750 kcmil Cable, 1/2 Inch Stud Hole

Category: 1-Hole Copper Compression Lugs

Fork Terminal, Flanged,Nylon Insulated, 18 - 14 AWG, Stud: #8, Color: Blue, Material: Copper, Package of 100 Each.

Category: Nylon Insulated Standard Fork Terminals

Outside Corner Fitting For Use With LDPH10 and LD2P10 Raceway, White

Category: 1-Piece Non-Metallic Raceway Elbows

Pan-Ty® marker tie, wrap, standard cross section, 14.6 (371mm) length, .44 x 2.00 (11.1 x 50.8mm) marker write-on area, nylon 6.6, natural, bulk package.

Category: Cable Tie Marker & Flag Ties

Circuit Breaker Lockout, Nylon, 0.4" x 1.75", Red

Category: Circuit Breaker Lockout Systems

J-PRO Cable support system, with hammer-on beam clamp for use with flanges 9/16 3/4 (14.3mm 19.1mm) thick, rotates 360 degrees, 0.75 (19.0mm) max. bundle capacity, nylon 6.6 with metal attachments, black, 50 pc. package quantity.

Category: J-Hook From Wire/Rod & Beam

Compression Lug, Copper, 2-Hole, Standard Barrel with Window, #8 AWG Wire, #10 Stud Hole, .63 Hole Spacing

Category: 2-Hole Copper Compression Lugs

M6 Panduit Screw with Cage Nuts are ideal for square-hole equipment rails on 4 post racks and cabinets. Cage nuts are removable and replaceable to best fit your networking needs. Steel, Black, 0.75L (18.9mm), 100pc.

Category: Enclosure Clip / Clamp Nut Packages

Category 6A, 8-position, 8-wire, keystone punchdown jack modules, violet.

Category: Snap-In Cat 6 Jack Inserts

Tak-Ty® hook & loop cable loop tie, 12.0 (305mm) length, .50 (12.7mm) width, nylon loop, polyethylene hook, blue.

Category: Velcro Hook & Loop Ties

Ring Terminal, 22 – 16 AWG, 3/8" stud size, standard package.

Category: Non-Insulated Ring Tongues

Pan-Steel® Self-locking Cable Ties speed up installation with a unique self-locking head design that locks into any part of the tie. Plus, the smooth edges of 304 stainless steel promote worker safety in indoor environments. Standard cross section, Max bu

Category: Non-Releasable Cable Ties

Crystal clear thin wall PVC heat shrink, .75" (19.1mm) diameter, clear polyvinyl chloride, 100 ft. (30.5m) per reel.

Category: Thin Wall Heat Shrink

Compression Lug, Copper, 1-Hole, Long Barrel, #2 AWG Wire, #10 Stud Hole

Category: 1-Hole Long Barrel Copper Compression Lugs

Ring Terminal, Vinyl Insulated, 22 - 18 AWG, 1/2" Stud Size, Funnel Entry

Category: Vinyl Insulated Ring Tongues

Two-hole, flex lug, 3/0 AWG wire, 1/2 stud hole, 1.75 hole spacing.

Category: 2-Hole Copper Compression Lugs

Category 6, UTP patch cord with TX6™ PLUS Modular Plugs on each end. Yellow, 6 ft.

Category: Category 6 Patch Cords

Single gang, flush mount vertical faceplate with labels. Accepts two NetKey® Modules.

Category: Snap-In Wallplates

200.00' (61.0m) nylon coated high temperature rating galvanized steel cable on roll without loophole (cable only).

Category: Cable Lockouts