Search results

2 fiber OM4 patch cord, riser (OFNR) rated, LC duplex to LC duplex, 16mm jacket, Std IL 18 meters

Category: Fiber Optic Patch Cords

Compression Lug, Copper, 2-Hole, Standard Barrel with Window, 1/0 AWG Wire, 3/8 Inch Stud Hole, 1 Hole Spacing, 90° Angle Tongue

Category: 2-Hole Copper Compression Lugs

Fork Terminal, vinyl insulated, 12- 10 AWG, 1/4 stud size, expanded insulation for large wire O.D.

Category: Vinyl Insulated Standard Fork Terminals

End of row floor seal for 1200mm deep cabinet. Color: Black

Category: 1-Piece Non-Metallic Raceway End Fittings

Cable Spacer Cross, Natural.

Category: Cable Tie Bases

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in a blue, nylon housing. It has a tab size of 0.110 x 0.032" (2.8 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.75" (19.1 mm) l

Category: Female Nylon Insulated Wire Disconnects

2 fiber OM1 LC Duplex to LC Duplex OFNR (riser) rated 16mm jacketed cable Std IL 8m

Category: Fiber Optic Patch Cords

2 fiber OS2 patch cord, low smoke zero halogen (LSZH) rated, LC duplex to LC duplex with 16mm jacketed cable, Std IL 40 meters

Category: Fiber Optic Patch Cords

OM3 12-fiber total, standard loss, LC duplex adapter cassette (color and split sleeve dictated by fiber type), Standard Method A

Category: LC Fiber-Optic Connectors

Used to carry the cables horizontally throughout the system. Accepts cable retainers FRCR12BL-X or hinged cover FRHC12BL6. Use QuikLock Coupler FRBC12X4BL to attach channel and/or fittings.

Category: Straight Sections

Optional split hinged cover for the channel FR6X4YL6. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables. Snap-on hinge feature enables positioning of cover at angles between 30° and 90°.

Category: Covers & Retainers

Fiber Indoor-Outdoor Tight Buffer Armored (Interlocking Aluminum) Cable, Riser (OFNR), 50um Multimode OM3 24 Fibers

Category: Multimode Fiber Optic Cable

6-port HD Flex MPO FAP with Type A adapter (Key-up to Key-down); Black

Category: Fiber Optic Termination Kits

2 fiber OM3 patch cord, LC push pull to LC push pull, low smoke zero halogen (LSZH), 16mm jacket with Standard IL 1 meter

Category: Fiber Optic Patch Cords

2 fiber OM3 patch cord, LC push pull to LC push pull, 16mm jacket, riser (OFNR) rated, Standard IL 1 meter

Category: Fiber Optic Patch Cords

Fiber Indoor-Outdoor Central Tube Armored (Interlocking Aluminum) Cable, Riser (OFNR), 9um Singlemode OS2 12 Fibers

Category: Single Mode Fiber Optic Cable

2 fiber OM4 patch cord, riser (OFNR) rated, LC duplex to LC duplex, 16mm jacket, Std IL 17 meters

Category: Fiber Optic Patch Cords

LTCHINGWIRECLIP ADH. .75IN BDLE NAT PK100

Category: Cable Clamps & Clips

Panduit® Custom-Length Continuous Banding can be cut to just the right length to guarantee a snug fit for your specific project. Plus, the banding is built with 304 stainless steel, so it suits indoor and outdoor environments. Super-heavy, 200'L (61m), T

Category: Banding & Strapping

Lightening Hole Cable Tie Mounts, Secure Cable Bundles That Run Through Bulkhead Lightening Holes and Protect Them From Sharp Edges, Indoor Environments, Attach With #6 (M3) Screws, Nylon 6.6, Natural, Package of 500

Category: Cable Tie Bases

One-piece latching surface raceway. Supplied with pre-applied adhesive backed tape. Available in 6', 8', and 10' lengths, International Gray, PVC, Length 10.00 ft.

Category: 1-Piece Non-Metallic Raceway

Pin Terminal, Vinyl Insulated, 22 - 18 AWG, Funnel Entry, Plastic Insulation Crimp

Category: Vinyl Insulated Pin Terminals

2 fiber OM4 patch cord, riser (OFNR) rated, LC duplex to LC duplex, 16mm jacket, Std IL 23 meters

Category: Fiber Optic Patch Cords

Compression Lug, Copper, 2-Hole, Flex, 450 kcmil Cable, 1/2 Stud Hole, 1.75 Hole Spacing

Category: 2-Hole Copper Compression Lugs