Search results

Adhesive backed "J" clip, .25" (6.4mm) bundle, light gray.

Category: Cable Clamps & Clips

Adjustable and releasable clamp, .69" (17.5mm) bundle, gray, bulk package.

Category: Cable Clamps & Clips

Category 6, RJ45, 8-position, 8-wire spring shuttered universal jack module. Blue.

Category: Snap-In Cat 6 Jack Inserts

Category 6A, UTP module, 8 pos 8 wire, 28/30 AWG, Universal, Yellow, TG Style.

Category: Snap-In Cat 6A Jack Inserts

Corrugated loom tubing slit wall, .38" (9.7mm) x 5000' (1524m), polyethylene, black.

Category: Split Wall Loom Tubing

Corrugated loom tubing solid wall, 1.25" (31.8mm) x 50', polyethylene, black.

Category: Split Wall Loom Tubing

Category 5e, RJ45, 8-position, 8-wire spring shuttered universal jack module. Yellow.

Category: Snap-In Cat 5e Jack Inserts

The Supra-Grip™ female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.250 x 0.032 (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.93" (23.6 mm) long and 0.35" (8.9 mm)

Category: Female Nylon Insulated Wire Disconnects

Corrugated loom tubing slit wall, 1.25" (31.8mm) x 50' (15.2m), polyethylene, yellow.

Category: Split Wall Loom Tubing

Laser/ink jet component label, 4.00" W x 1.00" H, adhesive polyester, white, 2 labels/row, 20 labels/sheet, 1000 labels/package.

Category: Permanent Labels

Coupler fitting for use with LD10, LDPH10, and LD2P10 raceway, International Gray, ABS, Length 1.24 in.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Category 6, RJ45, 8-position, 8-wire spring shuttered universal jack module. Black.

Category: Snap-In Cat 6 Jack Inserts

Corrugated loom tubing slit wall, .25" (6.4mm) x 100' (30.5m), polyethylene, orange.

Category: Split Wall Loom Tubing

Thermal transfer raised panel half push button label, 2.40" W x 2.00" H, raised panel, white, 1 label/row, 500 pc. package quantity.

Category: Permanent Labels

Keyed, Category 6A, RJ45, 10 Gb/s, 8-position, 8-wire universal shielded orange module with integral shield.

Category: Snap-In Cat 6A Jack Inserts

Used to support the 6x4 and 4x4 systems by spanning two threaded rod drops. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamp enables fast assembly to channel. Use 7/16in nut driver

Category: Brackets

Opticom® MPO FAP loaded with six (6) key-up/key-down MPO fiber optic adapters, oriented horizontally for Opticom® or Opticom® QuickNet™ Patch Panels and Fiber Enclosures, black.

Category: SC Fiber Distribution Plates

Fiber Indoor-Outdoor Tight Buffered Cable, Plenum (OFNP), 50um Multimode OM4 6 Fibers

Category: Multimode Fiber Optic Cable

Snap-on single gang rectangular electrical/communication faceplate. Used to cover one NEMA standard rectangular electrical outlet. In communication applications, covers one standard rectangular communication module frame, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Mini Com Executive series single gang faceplate accepts one Mini-Com® module, includes label and label cover. Off White.

Category: Snap-In Wallplates

Mini Com Classic series single gang horizontal faceplate accepts two Mini-Com® Modules, White

Category: Snap-In Wallplates

This Net-Direct™ Air Inlet Duct provides cold airflow directly into Cisco Nexus N2K-C2148T-1GE, N2K-C2248TP-1GE, and N2K-C2232PP-10GE fabric extenders and Cisco WS-C4948E-F, WS-C4948E-F-S, and WS-C4948E-F-E switch intakes from in-line. Not only does it re

Category: Rack Shelves

Module supplied with one LC (keyed B red) SFF duplex fiber optic adapter with zirconia ceramic split sleeves.

Category: Snap-In Blank Inserts

Category 6A, RJ45, 8-position, 8-wire universal coupler module, blue.

Category: Snap-In Cat 6 Jack Inserts