Search results

Screw-In Connector, 3/4 Inch, 1/2 inch, KO, Zinc Die Cast, For Use With Flexible Metal Conduit, Refer to Diagram: A = 1.565", B = 0.930", C = 1.390"

Category: Screw-In Flex Connectors

1-Gang, Duplex Device Receptacle Wallplate, Standard Size, Thermoset, Device Mount - White

Category: 1-Gang Duplex Receptacle Wallplates

Wire Marker Booklet, Legend: 1-45 (10 each)

Category: Wire Marker Booklets

PVC Cement, Medium Body, Low-Voc, Fast-Set, Clear, 1 Quart

Category: PVC Cement

Mounting Bracket. 1-Gang, Low Voltage, Old Work, Non-Metallic. For use with Low Voltage Class 2 Applications. For Installations on Existing Construction. Includes: Swing Arms.

Category: Non-Metallic Old Work Mounting Brackets

Deep Strut - Elongated Holes on Back, Height: 1-5/8", Width: 1-5/8", Material: Steel, Finish: Pre-Galvanized, Gauge: 14, Length: 10 feet. Color: Silver.

Category: Steel Strut with Elongated Holes

Wire Connector, Color Coded, Blue, Wire Range: 22 - 14 AWG, Package of 100. Includes: Internal Square Wire Spring. For Copper-to-Copper Connections Only., Wire-Nut®

Category: Color Coded Wire Connectors

Channel Nut W/ long spring, Thread Diameter: 3/8", Material: Steel, Finish: Electro-Galvanized. For Use w/ PS 200, 210, 300.

Category: Strut Channel Spring Nuts

Strut with Slots, 1-5/8" Depth x 1-5/8" Width x 10' Length, 12 Gauge Steel, Pre-Galvanized

Category: Steel Strut with Slots

2-Gang, Duplex Device Receptacle Wallplate, Midway Size, Material: Thermoplastic Nylon, Device Mount - Color/Finish: White.

Category: Midway & Oversized Duplex Receptacle Wallplates

Round Fan/Fixture Mounting Box, Diameter 4-1/4 Inch, L-Shape, 4.24 x 3.77 Inch, For 1/2 Inch or 5/8 Inch Drywall, Includes Center Screw, Installed NM Cable Connector, Mud Cover, Multiple Knockouts, (2) Screws For Fan/Fixture Bracket Installation, 70 Pound Fan Rating/200 Pound Fixture Rating

Category: Non-Metallic Saddle Boxes

(2) 12 AWG Conductors and (1) 12 AWG Ground, UF/NMC, 600V, Copper Conductor, Gray, 250 ft. Package.

Category: 12 AWG UF / NMC

AC Squeeze Connector For Flex, 3/8 Inch, Armored, MCI Cable

Category: Straight Squeeze Flex Connectors

Conduit Hanger with Bolt, 3/8 to 1/2 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod

Category: Conduit Clamps

3M™ Temflex™ General Use Vinyl Electrical Tape, Multi-Purpose, Brown, 3/4 in x 60 ft (19 mm x 18 m), 6 mil, 100 Rolls/Case

Category: Color Coding Tape

Wire Connector, Winged, 14 to 12 AWG, 600 Volt, Square Wire Spring, Rated 105°, Color: Red, Bag of 500 Each

Category: Color Coded Twist On Wire Connectors

EMT Connector, Set Screw, 1 Inch, Steel, Non-Insulated, For Use with EMT Conduit, UL 514 B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF 408E, NEMA

Category: Steel EMT Set Screw Connectors

(2) 12 AWG Conductors and (1) 12 AWG Ground, NM-B, Solid Copper Conductor, PVC Jacket, 90°C Insulation, 600V, Yellow, 1000 ft. Reel, Non-Metallic Sheathed Cable

Category: 12 AWG NM-B

Handy Box Cover, Type: Blank with 1/2" Knockout, Drawn, Metallic. Width: 2-5/16". Length: 4-3/16".

Category: Metallic Handy Box Covers

Insulation Piercing Connector, Run 3 - 4/0 AWG, Tap 10 - 2 AWG, Rated for Copper and Aluminum Conductors

Category: Splices - Insulation Piercing

Liquidtight Connector, Straight, Size: 1 Inch, Material: Non-Metallic, Color: Gray,For Use With Non-Metallic Liquidtight Conduit, Refer to Diagram: A = 1.950", B = 0.670", C = 1.925"

Category: Straight Non-Metallic Liquidtight Flex Connectors

6 AWG, THHN/THWN-2, Stranded Copper, 600V, White, Cut to Length

Category: 6 AWG Stranded Copper THHN

1-1/2 Inch EMT 90 Degree Elbow

Category: EMT 90° Conduit Elbows

Clog Resistant Marker Tip. Writes through Dusty, Wet and Oily Surfaces. Durable Marker Tip for Writing on Concrete, OSB and Rough Surfaces. Built-In Hard Hat Storage Clip. Fine Point. Ink Dries in Seconds. Lanyard Hole. Anti-Roll Body Design. Non-Toxic In

Category: Marking Pens & Pencils