"terminal blocks"

Insulated Multi-Cable Connector Block, Wire Entry One Side, 600V, Number of Ports: 4, Wire Range: 350 MCM - 6 AWG, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Single Sided Entry Wire Connector Blocks

Ring Terminal, Vinyl Insulated, 12-10 AWG, #6 Stud Size, Yellow, 500 Pack

Category: Vinyl Insulated Ring Tongues

Terminal Strip, Wire Range: 22 - 10 AWG, 3 Circuits, 30 Amps, 600V, Center Spacing: .562", Terminal Screw Size: #8-32 Philsot

Category: Terminal Strips

TERM BLCK END STOP

Category: Terminal Block End Stops

Pin Terminals, Maximum Solid: 2/0, Maximum Stranded: 1/0, For Use With: Aluminum or Copper Conductors, Rated up to 35 kV

Category: Non-Insulated Pin Terminals

IEC PUSH-IN TERMINAL BLOCK PLUG

Category: 2.5mm Feed Through & Ground Terminal Blocks

Single Row Terminal Blocks, 30A, industrial, Black, #6-32 TPI screw, hand wired, insulator base/mount end, Three-pole, -40 to 105 deg C, Break down voltage 3400V, Standard barrier, 300V, #22 to 12 AWG (Copper), Right angle bends, Molded the

Category: Terminal Strips

Fire Block Sealant, 10.1 Fluid Ounce Cartridge, 12 Each per Case

Category: Fire Barrier Caulking

High Current Terminal Insert, 6 Positions, 20-10 AWG Wire, Screw/Female, Die Cast Aluminum Alloy

Category: Industrial Rectangular Connector Female Inserts

Multi Port Direct Burial, 5 Ports, 350 kcmil-12 AWG Str, 600 V

Category: Connector Blocks - Submersible - One Sided Wire Entry

Ferrule kit includes: #24 “ 18 AWG insulated DIN ferrules. Case includes: 30 pieces each of FSD73-6, FSD74-6, FSD75-8, FSD76-8 and FSD77-8.

Category: Single Insulated Ferrules

MARKER DEKAFIX FSZ 6 MKD 1-10

Category: Terminal Block Vertical Marking Cards

Breaker, Molded Case, 400 Amp, 3-Pole, 480 Volt AC, 65 kAIC, XT5H, Front Terminal

Category: 480V Rated Molded Case Circuit Breakers

Fuse Holder Terminal Block. Double - Deck. Compression Clamp. Type: M 4/8.D2.SFDJ. Color: Gray. 300V/10A. Size: 4 mm Block, 8 mm Spacing. DIN 1 - DIN 3. Wire Size: 24 - 12 AWG. Includes: 24V LED Blown Fuse Indicator.

Category: Double Deck Fuse Holder Terminal Blocks

4 TERMINAL RINGLESS LARGE HUB OPENING LEVER BYPASS 2-200 AMP MAIN BREAKER 9-16 INCH BARREL LOCK WITH BRACKET PROVISION, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Mains - with Distribution

Ring Tongues, Vinyl-Insulated, Wire Range: 12 - 10, Stud Size: 1/4, Color: Yellow, 50/PK

Category: Vinyl Insulated Ring Tongues

WEI 0144400000 TERMNL BLK SAKE

Category: Terminal Block Vertical Innerconnections / Assembly Rods

Insulated Multi-Cable Stacked Connector Block, Wire Entry Either Side, 600V, Number of Ports: 6, Wire Range: 6 AWG - 350 MCM, UV Rated, Abrasion and Chemical Resistant. Dual Rated for use with Copper and/or Aluminum Conductors.

Category: Dual Sided Entry Wire Connector Blocks

Stronghold™ Ring Terminal, Vinyl Insul, 6 Awg, #10 Stud Size

Category: Vinyl Insulated Ring Tongues

Ring Terminal, Large Wire, 8 AWG, 3/8" Stud Size, Vinyl Insulated

Category: Vinyl Insulated Ring Tongues

Ring Terminal, Vinyl Insulated, 16 - 14 AWG, 1/4" Stud Size, Funnel Entry

Category: Vinyl Insulated Ring Tongues

FA05 1/2IN PVC FEMALE ADPTKRALOY

Category: PVC Female Terminal Adapters

Contact Block, Spade Terminal, Normally Closed, 30 mm, Limit 1 Block per Operator

Category: 30mm Contact Blocks

Terminal Block, Feed Through, 2.5 mm, Gray, 2 Conductor, 1000 Volt, 24 Amp

Category: 2.5mm Feed Through & Ground Terminal Blocks