"24V DC EINGEST.400°C"

DC Micro (M12), Female, Straight, 4-Pin, PUR Cable, Yellow, Unshielded, IEC Color Coded, No Connector, 5 meter (16.4 feet)

Category: 4-Pin Cordsets

Terminal Block, 2 Level Block, with MOV Between the Levels, 20 Amp, 600 Volt AC/DC, Gray, 22 - 12 AWG, 2.5 mm

Category: Double Deck Feed Through & Ground Terminal Blocks

500DC NEMA AC/DC Contactor, Motor Loads, Top Wiring, Size 4, 115-120 V 60 Hz, Open, 3 Power Poles

Category: NEMA Contactors - Non-Reversing

AB 889D-F4BCDM-1 PATCHCORD DC MICRO

Category: 4-Pin Cordsets

I/O Module, ControlLogix, Digital Input, 16 Channel, Current Source, 5 Volt DC

Category: PLC I/O Modules

Interface Module, Analog, Field Removable Terminal Block, Feed Through, 132 Volt AC/DC

Category: Interface Relay Terminal Blocks

Terminal Block, 2 Level, 2 Circuit, 35 Amp, 600 Volt AC/DC, Black, 26 - 10 AWG, 4 mm, 100 in a Package

Category: Double Deck Feed Through & Ground Terminal Blocks

Inductive proximity sensors XS, inductive sensor XS6 M12, L61mm, brass, Sn4mm, 24...240VAC/DC, 1/2"

Category: Ultrasonic Proximity Sensors

Grounding Bushing, 2-1/2 Inch, Threaded, Insulated, 1/0 to 14 AWG, Zinc, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

889 DC Micro Cable

Category: 5-Pin Cordsets

SIRIUS soft starter s0 25 a, 11 KW/400 V, 40 c 200-480 V AC, 110-230 V AC/DC screw terminals

Safety Contactor, 100S, 23 Amp, 24 Volt AC/DC, Electronic Coil, 3 Normally Open, 1 Normally Closed, Power Poles, 2 Normally Open & 2 Normally Closed, Line Side Coil Termination, Standard Contact

Category: IEC Contactors - DC Operating

Terminal Block, Green, 25 Amp, 300 Volt, AC/DC, 8.2 mm, Tubular Screw, with Pressure Plate, 50 in a Package

Category: 8.2mm Feed Through & Ground Terminal Blocks

THB CC-PG135-G 13.5 PG THREAD

Category: Straight Non-Metallic Liquidtight Flex Connectors

Compression Buttsplice, Copper, Tin Plated, 1000 MCM, Standard Barrel, Temperature Rating: 90 Deg C, Voltage Rating: 600 Volts to 35 kV, Color Code White

Category: Standard Barrel Copper Compression Sleeves

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, Copper, Tin Plated, For Code Copper Conductors, 8 AWG, 5/16 Inch Bolt Hole, Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 1-Hole Copper Compression Lugs

Hanger,purlin,with Swivel 3/8 Rod Fire Protection

Category: Rod & Wire Hangers

Conduit Bushing, Insulating, 1/2 Inch, Threaded, Thermoplastic Phenolic, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Ring Tongue Copper Tubing Terminal; 1.30 in L; .47 in W; Tin Plated; 600 Volts Max.; 105 C Max.

Category: Nylon Insulated Ring Tongues

Clamp With Locknut, Rod Size: 3/8, Design Load: 400LBS, Material: Steel, Finish: Black

Category: Beam Clamps - Adjustable

SIEMENS LOW VOLTAGE SENTRON MOLDED CASE CIRCUIT BREAKER WITH THERMAL - MAGNETICTRIP UNIT. STANDARD 40 DEG C BREAKER ED FRAME WITH HIGH BREAKING CAPACITY. 40A 3-POLE (42KAIC AT 480V). NON-INTERCHANGEABLE TRIP UNIT. SPECIAL FEATURES LOAD LUGS ONLY (LN1E100) WIRE RANGE 10 - 1/0AWG (CU/AL). DIMENSIONS (W x H x D) IN 3.00x 6.4 x 3.92.

Category: 480V Rated Molded Case Circuit Breakers

Easy-Splice Dual Rated Direct Burial Butt Splice Kit for 1/0 AWG to 250 MCM Utilizing a mechanical dual rated splice and matched heavy wall heat shrink tubing to create an insulated splice for copper and/or aluminum cables. Temperature Rating: 105 degrees C. 600 Volt Maximum.

Category: Low Voltage Heat Shrink Splice Kits

Grounding Bushing, Insulated, Size: 3 Inch, Material: Malleable Iron, Lug: Aluminum, Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit, With Aluminum Lug, Outside Diameter: 4 1/16 Inch, Width:1 5/16 Inch, Grounding Wire Size Minimum: 14 Wag

Category: Threaded Ground Bushings

Cable Clip to Stud, (4) NMC or (8) 4-Pair UTP Cables, Non-Metallic

Category: NM-B NMC & MC/AC Cable Support For Studs