"rain pants"

Housing Pack4" Housing Pack, For Use With NuTone AEN110F and AN110F Fan Finish Packs To Complete The Installation, Housing Dimensions L x W x D: 9-1/4" x 10" x 5-3/4"

Category: Fan Housing / Finish Packs

Drive, Accessory, Replacement, Control I/O Card, Altivar 312

Category: Variable Frequency Drive Replacement Parts

Universal support, material: Fibreglass-reinforced, thermoplastic polyester (PBT), Fire protection corresponding to UL 94-V0, color: RAL 7035, supply includes: Assembly parts, description: For attaching laminated copper bars or multi-stacked laminated copper bars. Packaging Unit: 3 pc(s).

Category: Load Center Neutral & Ground Bars

Power Module, PowerFlex 750 Kit, IGBT with Reflected Wave Filter, 600 Volt AC, 545 Amp, 690 Volt AC, 505 Amp, Copper, IP00, Frame 8M

Category: Variable Frequency Drive Replacement Parts

Vortex Coolers generate chilled air to cool small enclosures without refrigerants or moving parts. This Vortex Cooler Type 12, VC2516012 item is rated 2500BTU 115V with a material of Aluminum finish Brushed.

Category: Enclosure Air Conditioners

Replacement Part, Field Exciter Board, GE, 20 Amp, 600 Volt AC, 1-Phase, 7 Jumpers, 2 Terminal Blocks, with 3 Terminals on each Set

Category: Variable Frequency Drive Replacement Parts

4" LED Lighted Finish Pack, CFM: 70, Sones: 1.5, Energy Star Qualified, Series: InVent. For Use With Broan A000HL Fan/Light Housing Packs To Complete The Installation. Includes: Fan Motor and White Grille. Housing L x W x D: 9-1/4" x 10" x 5-3/4". Grille Size: 11-3/4"L X 12-1/2"W.

Category: Fan Housing / Finish Packs

Motor/Grille Assembly, CFM: 80, Sones: 2.5, Duct Size: 4". Includes: Fire Damper Fan/Blower & Grille. Requires: Broan RDA Kit to Complete. Has Been Replaced By Nutone AN80HDF

Category: Fan Motor / Grill Assemblies

CBDCIC CDB SERIES ACCESSORY - INSIDE CORNER. The inside corner accessory attaches to the heaters prior to installation of the heaters to insure a tight fit into the corner of the wall. For LF, HBB & D Series Baseboard Heaters

Category: Heater Adapter Plates

Chain, 10 ft, 9 Gauge, White

Category: Replacement Fixture Parts

Padlocking Wing Knob provides the ability to lock a cabinet while maintaining a higher UL rating. This Padlocking Wing Knob, PTWPSS item measures 1.97x1.30x1.00 inches with a material of SS316 finish Brushed.

Category: Heater Replacement Knobs

System support rails, material: Sheet steel, surface: Zinc-plated, supply includes: 2 system support rails (45 x 25 mm), 4 T-head screws M12 x 60 mm, Assembly parts, description: For heavy installed equipment such as transformers. T-head screw and slot in the support rail accommodate all mounting dimensions. Packaging Unit: 2 pc(s).

3 Element Infrared Painted Steel Enclosure Only, 24", 90 degree reflector angle. ELEMENT TYPE* | Metal Sheathed; Quartz Tube and Quartz Lamp

Category: Heater Mounting Boxes

LoudMouth monitors electric heating wire elements during the entire installation process and?sounds an alarm if the heating elements are cut or damaged. 9V Battery power. On/off switch. Indicator lights. Test button and audible alarm.

Category: Heater Temperature Sensors

Cable clamp rails, Mounting angle for TS, SE, PC, TP universal console, TS base/plinths, Flex-Block, material: Steel, surface: Zinc-plated, supply includes: Assembly parts, description: For TS, ES, PC, TP universal console, base/plinth, for strain relief with cable entry. Packaging Unit: 2 pc(s).

Cable clamp rails, Mounting angle for TS, SE, PC, TP universal console, TS base/plinths, Flex-Block, material: Steel, surface: Zinc-plated, supply includes: Assembly parts, description: For TS, ES, PC, TP universal console, base/plinth, for strain relief with cable entry. Packaging Unit: 2 pc(s).

features: Full Molded Threads, Fit All Stonco Housings, Use Of Colored Globes Will Down-rate Wattage, Application: For Vertical Mounting Only, Material: Glass,width: 3.5in, Height : 6.687in, Transparency: Clear

Category: Replacement Fixture Parts

Side panels, screw-fastened, sheet steel, for TS, TS IT, material: Sheet steel, 1.5 mm, surface: dipcoat-primed, powder-coated on the outside, color: RAL 7035, supply includes: Assembly parts, description: Side panels, screw-fastened, sheet steel, for TS. Packaging Unit: 2 pc(s).

Side panels, screw-fastened, sheet steel, for TS, TS IT, material: Sheet steel, 1.5 mm, surface: dipcoat-primed, powder-coated on the outside, color: RAL 7035, supply includes: Assembly parts, description: Side panels, screw-fastened, sheet steel, for TS. Packaging Unit: 2 pc(s).

5-1/2 inch diameter heat-resistant globe (250W maximum)

Category: Hazardous Fixture Replacement Parts

Mounting bars, for TS, SE, CM, TP, For the inner mounting level and for mounting on doors, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For attaching cable ducts, cable conduit holders, contact hazard protections, door installations, cable clamping and attachment, etc. Packaging Unit: 20 pc(s).

Category: Rack Mounting Kits & Hardware

Enclosure internal fan, for TS 8, supply includes: Complete unit with radial fan ready for connection, Snap-on pivot device, Assembly parts, description: To prevent hot-spots inside the enclosure and support the air routing of active enclosure climate control components.

4" Finish Pack, CFM: 110, Sones: 1.3, Energy Star Qualified, Series: InVent. For Use With NuTone AN110HF Fan Housing Packs To Complete The Installation. Includes: Fan Motor and White Grille. Housing L x W x D: 9-1/4" x 10" x 5-3/4". Grille Size: 11-1/4"L X 12"W.

Category: Fan Housing / Finish Packs

Pull-Out Shelf for Mini Keyboard mounts in either a cabinet or a 19in open-frame rack. This Pull-Out Shelf for Mini Keyboard, P19KBSM item measures 2U with a material of Steel colored Black.

Category: Enclosure Shelves