"wiremold"

W-mold Wsc42-6 6 Gand Box W/d ividers

Category: Work Surface Power Centers

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Rectangular Flange, 3-Gang, Brass

Category: Square / Rectangle Recessed Box Flanges

2-Gang, Upper Panel Device Plate, Metallic, Device Type: Duplex Receptacle. For use with AF Series Raised Floor Boxes.

Category: Recessed Floor Box Service Fittings

Aluminum housing and side plates, with a steel base and divider, measures 4" x 5" x 5 5/8". Base is configurable to have a combination of two 3/4" knockouts or two 3/4" EMT stubs. Accommodates a variety of power outlets (duplex, decorator, GFCI and up to 30A twist lock). Use Wiremold AVIP to provide communications and A/V. Receptacles and wall plates are sold separately.

Category: Recessed Floor Box Service Fittings

Wiremold S1mc Mud Cap

Category: Octagon Metallic Box Mud Rings

Mini Adapter Cover Plate, Accepts (3) Wiremold CM2 Series Communication Connectivity Inserts, Length: 12 Inches, Provides a Flush Installation, Includes Cover and 6 Amp Mini Adapter, (6A-Opening).

Category: Large 2-Piece Metallic Raceway Cover Plates

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Non-Metallic, External Base Elbow, 5000 Series. Size: 5-1/16" Length. PVC, Ivory

Category: 2-Piece Non-Metallic Raceway Elbows

Steel, 2-Gang, Duplex / Mouse Hole Plate, 4000 Series. Size: 5-1/8" Length. Gray.

Category: 2-Gang Raceway Box Covers

Kit comes complete with (1) prewired 20A duplex receptacle, (receptacle can be wired as a standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM Series open system adapters (unloaded), Ortronics Series II, and TracJack adapters and adapter to accept AVIP or Extron Electronics MAAP devices. Modular jacks and A/V connectors sold separately.

Category: Round Recessed Box Covers

WIREMOLD ALA-ABRT

Category: Large 2-Piece Metallic Raceway Cover Plates

Service Box Fitting, Type: 20 Amp, 125 Volt Duplex Receptacle (One Side), Metallic

Category: Recessed Floor Box Service Fittings

Service Box Plate, Metallic, Type: Decorator/GFI Opening (One Side)

Category: Recessed Floor Box Service Fittings

Non-Metallic, 1-Piece Raceway, PN03 Series, Size: 8' Length, 13/16" Width, 1/2" Height, PVC, White

Category: 1-Piece Non-Metallic Raceway

Steel, Adapter Fitting, 1500 Series. Size: 2-15/16" Height. For use with: V200, V500, V700. Ivory.

Category: Metallic Overfloor Raceway Connectors & Adapters

Non-Metallic, 2-Gang, Deep Divided Box, 2300 Series. Size: 4-7/8" Length, 4-3/4" Depth, 2-1/4" Width. PVC, Ivory.

Category: 2-Gang Raceway Device Boxes

Steel, 1-Gang, Single Channel Decorate Device Plate, DS4000 Series. Size: 6" Length. Fog White. For 15A or 20A Duplex receptacles, or 106 style Data Frames.

Category: 1-Gang Raceway Box Covers & Faceplates

A/V device includes one prewired 20A duplex receptacle which can be wired as a standard receptacle or isolated ground. Finished with an brushed aluminum flange and a black colored device plate. Includes one adpater to accept Legrand AVIP or Extron Electronics MAAP mini architectural adapter plates, Wiremold Open System adapters, and Ortronics TracJack and Series II mounting adapters. Modular Jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. AV3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Anodized Aluminum

Category: Assembled Poke-Through Units

5-1/2" Round Cover, Metallic, Diameter: 5-1/2 Inch, (2) 1-1/2 Inch Screw Plugs, Furnished With Gaskets and (3) Screws, Brass

Category: Round Recessed Box Covers

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

WIREMOLD CAF3-DP1 DUPLEX PWR

Category: Recessed Floor Box Service Fittings

For closing open end of DS4000B Raceway Base. Has two 3/4" and 1" trade size KOs. Designer Gray

Category: Large 2-Piece Metallic Raceway End Fittings

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units