"CCP2-1-30CC"

CDY 4010150EG CLEVIS1 1/2EGRE

Category: Strut Channel Clevises

Flat Washer, 1/4", 316 Stainless Steel, Order of 1 Each = Pack of 100

Category: Stainless Steel Flat Washers

Handy Box, 2-1/8 Inch Deep, Side Knockouts: (4) 3/4 Inch, End Knockouts: (2) 3/4 Inch, Bottom Knockouts: (1) 3/4 Inch, Cubic Inches: 14.5, Drawn, Metallic

Category: Metallic Handy Boxes

1 Hole Short Barrel Copper Compression Lug w/ Peep Hole 1/0 AWG - 3/8" Bolt Short Barrel Copper Compression Lugs with Peep Hole is a type of copper compression connector that is produced from high conductivity copper tubing. They are tin-plated to provide corrosion resistance and are marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed.

Category: 1-Hole Copper Compression Lugs

Insulated Compression Connector, Size: 1 IN, Connection: Male Threaded X Compression, Material: Malleable Iron And Steel, Length: 1.63 IN, Thread Length: 0.63 IN, Diameter: 1.88 IN, Standard: UL 514B, CSA C22.2 No. 18.3, CSA 065178, NEMA FB-1, For Use To Secure And Terminate Steel EMT To Knockouts And Concrete Tight Box

Category: Steel Rigid Conduit Compression Connectors

UNISTR P1000 20HG Deep Strut,1 5/8inSQ,S

Category: Steel Solid Strut

Power Distribution Block, 2 Pole, 175 Amp, 600 Volt AC, 1 Main/1 Branch, Thermoplastic Block

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Non-Metallic, 1-Gang, Extra Deep Device Box, 2300 Series. Size: 4-3/4" Length, 3" Width, 2-3/4" Depth. PVC, Ivory.

Category: 1-Gang Raceway Device Boxes

Lock Washer Kit. 415 Assorted Zinc Plated Steel, Lock Washers. Includeds: (6) Sizes: #8, #10, 1/4", 5/16", 3/8", 1/2", 100 - #8, 100 - #10, 100- 1/4", 50 - 5/16", 40 - 3/8", 25 - 1/2" *Dottie Part # 31005.*

Category: Washer Kits

Deep Pro Organizer, Length: 17-1/2", Height: 4-1/2", Width: 14"

Category: Compartment Boxes

Panduct® Type NE Halogen-Free Slotted Wiring Duct , 1 Inch x 2 Inch x 6 Foot, White, Polyphenylene Oxide, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Special Purpose Wire Duct

Contact Block, Mounting Collar, Harmony, XB5A Operators, 22 mm, 1 Normally Open, Screw Clamp Terminal

Category: 22mm Base Mount Contact Blocks

SCR14X114FEW FENDER WASHER 1/4X1-1/4-40725 1420WF

Category: Zinc Plated Steel Fender Washers

2-Gang, Nail-On, Switch/Outlet Box, Non-Metallic, Depth: 3.875 Inch, Cubic Inches: 22.5, Adjustable for Wall Thickness from 1/4 Inch to 1-1/2 Inch, Mounts Directly to Wood/Steel Stud

Category: Non-Metallic Switch / Outlet Boxes With Brackets

EJ12 1 1/4IN PVC EXPANSIONJOINT KRALOY

Category: PVC Expansion Couplings

3 Inch PVC 11-1/4 Degree Elbow, Schedule 40, Gray, Bell End

Category: Schedule 40 11-1/4° Elbows

Weatherproof Cover, 1 Gang, Duplex Type, Non-Metallic

Category: 1-Gang Non-Metallic Weatherproof Box Covers

Conduit to Flange Clip, Bottom Mount, Snap Close, 1 Inch EMT, 1/8 Inch - 1/4 Inch Flange, Steel

Category: Flange-Mount Cable/Conduit Clips

TKO Hole Saw, Carbide Tipped, Diameter: 1"

Category: Carbide Tipped Hole Saws

WHITE 24V PROTECTED LED W/1 N/C+1 N/O

Category: 22mm Base Mount Lamp Blocks

Knockout Seal, Type: Snap-In, 1-1/2 Inch, Black, Non-Metallic

Category: Non-Metallic Knockout Seals

Compression Lug, Straight, Standard Barrel, 2-Hole Mount, Copper, Un-Plated, For Code Copper Conductors, 2/0 AWG, 1/2 Inch Bolt Holes, 1-3/4 Inch Spacing, With Inspection Probe, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 2-Hole Copper Compression Lugs

Liquidtight Connector, 1/2 Inch, 90°, Malleable Iron With Zinc Chromate Finish, For Use With Metallic Liquidtight Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

4IN OCT BOX 1-1/2 DP

Category: Octagon Metallic Boxes