"FRS-8"

The thermal transfer military grade heat-shrink label in white is single sided with a 3/8" (9.525mm) diameter and made of 3:1 flattened polyolefin. It is 1" (25.4mm) wide and .64" (16.3mm) high. The heat-shrink sleeve is designed to provide a clear, relia

Category: Heat Shrink Wire Marker Labels

Extra Heavy Duty Direct Burial Ground Clamp for up to 1in Pipe This incredible ground clamp can handle just about any size ground wire and just about any application. UL Listed for direct burial in earth and concrete, it can be used with rebar, water pipe, copper tubing and ground rods up to 1 inch in diameter. Assembled with tough, 304 stainless steel screws. Will accommodate ground wires from 8 AWG to 4/0 AWG. cULus Listed Grounding and Bonding.

Category: Bare Wire Ground Clamps

Cubitron II 982C Close Coated Premium Abrasive Disc, 4-1/2 IN Dia, 7/8 IN Center Hole, 36+ Grit, Extra Coarse

Category: Flap Discs

Marker Cards, Blank, Linked for 1492-W, R, 700-HA Relays, 8 mm x 9 mm, 56 on a Card, 5 in a Package

Category: Terminal Block Blank Marking Cards

Battery Backup Emergency 8W 120 277V LifeP04 Battery 90 Minute Backup

Category: LED Driver Emergency Power Supplies

Stainless Steel Tie, 7.9" Long, 200lb Tensile Strength, SS304, Metal, 100/pkg

Category: Non-Releasable Cable Ties

Compression Lug, Straight, Standard Barrel, 2-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 2 AWG, 1/4 Inch Bolt Holes, 5/8 Inch Spacing, Coded Brown, With Inspection Window, Voltage Rating: 600 -35000,Temperature Rating: 90 Deg C

Category: 2-Hole Copper Compression Lugs

Hydraulic Impact Wrench, Hex Chuck Size: 7/16", Weight: 7.4 lbs, Hydraulic Flow: 4 - 10 GPM, Operating Pressure: 1,000 - 2,500 PSI, Pressure Port Thread: 3/4-16 SAE O-Ring, Return Port Thread: 3/4 - 16 SAE O-Ring, Maximum Torque: 400 ft-lb at 8 GPM.

Category: Hydraulic Impact Wrenches

Post Base, 1 5/8-in Series, Hole Diameter: 9/16 in, Material: Steel, Finish: Electro- Galvanized.

Category: Post Base Strut Channel Connectors

30 Amp, 2-Pole, Classified Circuit Breaker, 10 kAIC, 240 Volt, Wire Size: (1) #14-8, (2) #14-10. Square D QO Replacement Breaker

Category: Residential 2-Pole Circuit Breakers

Type H High Strength Split Bolt Connector, 12-10 AWG Solid/Stranded Copper, 3/8 x 25/32 IN, Bronze Alloy

Category: Copper Alloy Split Bolts

Ring Tongue, Terminal-Polyvinylchloride Insulated, 3/8" stud, 1.15 in Length, 53 in Width, 600 Volts Max., 105 Deg C Max

Category: Vinyl Insulated Ring Tongues

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 1/2 IN, 1-7/16 IN Outside Diameter, Length: 1-3/8 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third P

Category: Iron Rigid Conduit Three Piece Couplings

The thermal transfer self-laminating adhesive label is made of vinyl and is supplied on a roll with 8 labels per row. The label has a white colored print-on area 0.25" (6.4 mm) high for 18 - 14 AWG wires and a clear overlaminate. It is 0.5" wide

Category: Self-Laminating Labels

Power Distribution Block, High SCCR, Finger-Safe, Line/Load: 8 - 2/0 AWG, 200kA SCCR, Max Fuse Size: 200A Class CC, G, J, T, 175 Amps

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

Compression Lug, Straight, Standard Barrel, 2-Hole Mount, Copper, Tin Plated, For Code Copper Conductors, 1 AWG, 1/4 In Bolt Holes, 5/8 In Spacing, Coded Green, Peep Hole

Category: 1-Hole Copper Compression Lugs

Ground Bar, Isolated, Insulated, 11 x 14 - 8 AWG, 3 x 14 - 4 AWG

Category: Panelboard Isolated Ground Assemblies

20 Amp, 125 Volt, 2P, 3W, Duplex Receptacle, Industrial Series Extra Heavy Duty Specification Grade, Tamper-Resistant, Hot Terminal Split with 2 Plug Controlled, Straight Blade, Self Grounding, Back and Side 8 Hole Feed-Thru WIred, White

Category: 20 Amp Industrial Grade Receptacles

Breakaway TRON 2-Pole In-Line Fuse Holder for 13/32" x 1-1/2" Fuses, Load/Line: 8-12 AWG Cu Crimp

Category: In-Line Fuse Holders

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Narrow Body Duplex Receptacle, Straight Blade, Industrial Grade, Self Grounding, Back & Side 8 Hole Feed-Thru Wired, Steel Strap - White

Category: 15 Amp Industrial Grade Receptacles

Eaton B-Line series panels and panel accessories, NEMA 12, White powder coated, JIC panels can be installed in all JIC Enclosures, JIC and small panels, Panels and panel accessories, Galvanized panel

Category: Enclosure Back Panels

LED Slim Puck Light: 24V DC, 4 Watt, Up to 280Lm, Adjustable CCT: 2700K - 3000K - 4000K, 90+ CRI, Dimmable: 5-100% (TRIAC/ELV/CL), 3”W x 5/8”H. cETLus Listed - dry locations. Surface mount or recessed mount application. Includes: (1) Black Trim, (1) White Trim, (1) Black Surface Ring, (1) White Surface Ring, 72” lead wires.

Category: Mini Recessed LED Downlights

Resin, Electrical Insulating, 11.2 cubic inches, 7.4 ounce Package. Resin is a 2-Part Epoxy Insulating and Encapsulating Resin. Use to Splice Solid Dielectric and Oil-Filled Cables up to 8 kV.

Category: Insulating & Sealing Compound

15 Amp, 125 Volt, NEMA 5-15R, 2P, 3W, Narrow Body Duplex Receptacle, Straight Blade, Industrial Grade, Self Grounding, Back & Side 8 Hole Feed-Thru Wired, Steel Strap - Ivory

Category: 15 Amp Industrial Grade Receptacles