"16375-3"

Breaker, Molded Case, J Frame, Terminal Lugs, 4 - 300 MCM, AL/CU, 3 Per Package

Category: Molded Case Circuit Breaker Lug Kits

Switch, Disconnect, Non-Fused, 32 Amp, 690 Volt AC, 3 Pole, 2 Position, Body and Shaft, Red/Yellow Knob, Front Mount

Category: Door Mount Non-Fusible Disconnect Switches

40 Amp Fuse, Rejection, Brand or Series: Class RK5, Interrupting Rating: 200000 Amp VAC RMS Symmetrical, 20000 Amp VDC, Terminal Type: Cartridge, Rejection, Dimensions: 13/16 Diameter x 3 Length Inch, Voltage Rating: 250 VAC/125 VDC, Features: Time Delay, Dual Element

Category: Class RK5 Fuses

AB 1497A-A8-M6-3-N CONTROL POWER

Switch, Disconnect, Non-Fused, 25 Amp, 690 Volt AC, 3-Pole, 2 Position, Body and Shaft, Base/DIN Rail Mount

Category: Base & DIN Rail Mount Non-Fusible Disconnect Switches

Hex Head Bolt, Silicon Bronze, 3/8-16 x 3/4 Inch, Full Thread

Category: Hex Head Bolts

***DISCONTINUED, SEE SUB*** Flashing Panel, 1/8 to 3/8 Inch Size, For Use As Flashing in Plumbing Applications, Blue, Non-Metallic

Category: Weatherproof Box Flashing Panels

Variable Frequency Drive Cable, Type P, 4/3 + 8/3 Ground, 2kV

Category: VFD Tray Cable

Breaker, Molded Case, J Frame, Terminal Lugs, 10 - 350 MCM, CU Only, 3 per Package

Category: Molded Case Circuit Breaker Lug Kits

Meter Base, 200 Amp, 7 Jaw, Ringless, 600 Volt AC, OH/UG Service, Lever Bypass, Hub Optional, 3-Phase, ****Customer must confirm local utility or metering/power distribution approval for the metering and power distribution equipment prior to installation. Seller makes no warranty of utility acceptance.****

Category: Meter Sockets without Bypass

Conduit Hub, 1 Inch, Insulated, Raintight, Zinc Die Cast

Category: Die Cast Zinc Conduit Hubs

(3) 4/0 AWG and (1) 2/0 AWG Bare Ground, SE/SER, 600V, Aluminum Conductor, PVC Jacket, 1000 ft. Reel.

Category: Aluminum SER Service Entrance Cables

Manual Motor Control, Breaker Type, Rotary Operator, 37 - 50 Amp, 600 Volt AC, 3-Pole, Screw Clamp

Category: Manual Rotary Motor Controllers

Molded Case Circuit Breaker, G frame, 25 kA Interrupt Rating, T/M - Thermal Magnetic, 3 Poles, Rated Current 30 Amp, 480 Volt AC, Standard Bus Bar Mount, Top Feed

Category: 480V Rated Molded Case Circuit Breakers

Contactor, IEC, 55 Amp, 3-Pole, 120 Volt AC, Non-Enclosed, 1 Normally Open Auxiliary Contact

Category: IEC Contactors - 38-65 Amp

Disconnect Switch, UL, Terminal Shroud, Line or Load Side, 200A, Fused, 2 per Switch, 3-Pole

Category: Disconnect Switch Terminal Shrouds

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code«. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs. The MPDB series is offered in three size categories: miniature (MPDB62 and MPDB63 series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69 series), in both aluminum and copper. 2 wires in 2 wires out 3 poles 620 amps AL Large size.

Category: Double Primary / Double Secondary Non-Insulated Distribution Blocks

Fuse Adapter Kit for 100 Amp, 600 Volt AC, Type R, General Duty, Heavy Duty and Double Throw Safety Switches, Order (1) Kit for 3 Poles and (2) Kits for Double Throw

Category: Safety Switch & Disconnect Fuse Adapter Kits

SAFETY SWITCH VBII 200A 3-POLE 3-WIRE 240V NON-FUSIBLE GENERAL DUTY NEMA TYPE 3R OUTDOOR ENCLOSURE SERIES A

VARIABLE PITCH CAST SHEAVE

Category: Electric Motor Pulleys / Sheaves

Reactor, Line Input, Line Output, 500 Amp, 0.050 mh, 3 to 5 % Impedance, for 200 thru 690 Volt AC, 3-Phase, NEMA 1, IP11

Category: Line & Load Reactors

Fuse Holder, UL Class CC, 30 Amp, 600 Volt AC, 3-Pole, DIN Rail Mount

Category: Class CC Finger Safe / Dead Front Fuse Holders

AFC 4579-21 12/3 METAL WHIP 3/8 X 6' WHIP WITH DIE CAST SET SCREW CONNECTORS

Category: Metallic Armored Cable Whips

4 Inch Square Box Device Ring, 1-Gang, 3/8 Inch Raised, Cubic Inches: 3.2, Non-Metallic

Category: Non-Metallic Plaster Rings