"DVPA-1-10-SM-2"

Wire Stripper, T®-5 T®-Stripper, Capacity: 10-18 AWG Solid, 12-20 AWG Stranded

Category: Wire Strippers

Steel City® TS-101 1-Hole Snap Strap, 1/2 in, For Use With EMT Conduit, Steel, Zinc Plated

Category: Steel 1-Hole Conduit Straps

Pipe Support Strap, Size: 1/2 inch, Material: PVC Coated Steel. Used in either Vertical or Horizontal Position.

Category: PVC Coated Conduit Support Straps

Conduit Hanger, Snap Style, 1-1/2 Inch, 1/2 Inch Mounting Hole, Nylon, For Use With Rigid/IMC Conduit

Category: Snap Lock Pipe Hangers

Pulling Elbow, 1/2 Inch, 90°, Female/Female, Gasketed, With Cover, Zinc Die Cast, For Use With Rigid/EMT

Category: Zinc Die Cast Rigid Elbows

Eaton B-Line series cable support fasteners, Wall studs, 1" Height, 1" Length, 1" Width, 0.073lbs, Stud size: 1.25", Cable support

Category: NM-B NMC & MC/AC Cable Support For Studs

Cordset, Mini 9 Pin, 600 Volt, Straight Female, 7 Amp, 16 AWG, STOOW-A, Color Code A, 10 meter

Category: 9-Pin Cordsets

Resin Splice Kit, Multi-Mold, 600V, Maximum Conductor: 8 AWG (Split Bolt), 4 AWG (H & C Tap Compression). Kit Includes: Mold Body, Sealing Mastic, Scotchcast Resin 4 and Adhesive Film Strip.

Category: Non-Shielded Resin Splices

Lay-In Type 1 Screw Cover Wireway, Straight Section, Size: 6 Inch Wide, 6 Inch Deep, 4 Foot Length, 16 Gauge Steel, ANSI 61 Gray Polyester Powder Paint Finish, No Knockouts

Category: Screw Cover Wireway

1-1/4" Sealing Ring

Category: Liquidtight Connectors - Accessories

Breaker, Miniature, Circuit, 50 Amp, 1 Pole, 120/240 Volt AC, Panel Mount, 10Ka AIC

Category: 1-Pole Cable-In / Cable-Out Circuit Breakers

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 0.840 Inch, Nominal Conduit Size 1/2 Inch, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

Switch Box, Non-Gangable, 4 Gang, Steel, 2-1/2 Inch Deep, FM Bracket, End Knockouts: (2) 1/2 and (2) 3/4 inch, Bottom Knockouts: (4) 1/2 and (4) 3/4 Inch, Welded, Steel

Category: Metallic Gang Boxes

Load Center, Main Lug Only, 125 Amp, 24 Space 34 Circuit, 120/240 Volt AC, Plug-On Neutral, 65 kAIC, NEMA 1

Category: 1-Phase Main Lug Copper Bus Load Centers

One-hole, standard barrel with window lug, 1/0 AWG wire, 1/4 stud hole.

Category: 1-Hole Copper Compression Lugs

Reducing Washer, 1-1/2" x 3/4", Steel

Category: Reducing Washers

Main Lug Load Center, Type EQ, 1-Phase, 125 Amp, NEMA Type 1, Surface Cover, 12 Max Number of Spaces, 24 Max Number of Poles, 6 QP Max 2 Poles, Aluminum Bus, 25 kAIC.

Category: 1-Phase Main Lug Aluminum Bus Load Centers

EMT Connector, Set Screw, 1 Inch, Steel, For Use with EMT Conduit, UL 514 B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF 408E, NEMA

Category: Steel EMT Set Screw Connectors

Liquidtight Connector, 90 Degree, Diameter 1-1/2 Inch, Malleable Iron With Zinc Finish, For Use With Liquidtight Flexible Metal Conduit

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Nipples, 1-1/2 x 4-1/2 Inch, Schedule 40, Steel/Galvanized, Meets or Exceeds All Applicable ASTM & ANSI Standards and Lead Free.

Category: Welded Plumbing Pipe Nipples

Liquidtight Connector, Straight, Size: 1 Inch, Material: Non-Metallic, Color: Gray,For Use With Non-Metallic Liquidtight Conduit, Refer to Diagram: A = 1.950", B = 0.670", C = 1.925"

Category: Straight Non-Metallic Liquidtight Flex Connectors

Handy Box Cover, Type: Single Receptacle, Opening: 1-13/32 Inch, Raised 1/4 Inch, Drawn, Width: 2-1/8 Inch, Length: 4 Inch, Steel

Category: Metallic Handy Box Covers

EMT Compression Connector, Raintight, 7000GSR Series, 1-1/2 Inch, Steel/Zinc Plated, For Use With EMT Conduit

Category: Steel Raintight EMT Compression Connectors

The Saf-T-Brace Allows You To Safely Install A Ceiling Fan Or Light Fixture Without Access To Attic Space, And Provides Secure Attachment To An Existing Ceiling Joist. Ideal For Installation During New Construction Or Remodeling, The Mounting Brace Can Also Be Installed In Finished Ceilings Through A Hole Large Enough To Fit The Box. Three Teeth On Each End Of The Brace Easily Twist And Lock Into The Ceiling Joists, Its Threaded Multiple Lead Adjusts Quickly, And Its Square Tube Allows For Easy Turning. For Added Ease, The Electrical Box Can Be Positioned Anywhere On The Brace To Fit Your Project Needs. The Saf-T-Brace Features A Heavy-Duty, 1-1/2 Inch, All-Metal Electrical Box, With 15.5 Inch Wiring Capacity And Dual Mounting Capability For Lightweight Or Heavier Fans And Fixtures. For Fixture Support Up To 150 Pounds On 16-Inch Centers, And Up To 50 Pounds On 24-Inch Centers. It Is Acceptable For Fan Support Up To 70 Pounds

Category: Octagon Metallic Ceiling Boxes With Hangers