"wiremold"

6' Plugmold Tamper-Resistant Multioutlet System Black

Category: Single Circuit Steel Plugmold

Wiremold Meeting Room Solutions provide an integrated "last meter" solution for bringing power and technology closer to the user's work area. Current trends in workplace design are allocating more open space for meetings. Those trends present a challenge for routing and managing cables from the infrastructure to the point-of-use, as well as providing ready accessibility for future technology upgrades. Meeting Room Transition Channel (MRTC) and Under Table Cable Management (UTCM) were designed as part of a flexible, integrated solution set that manages cabling and connections for power, communications and A/V from the building infrastructure to the work surface.

Category: Furniture Power

Series 2400 Raceway Cover, 040" (1.0mm) steel, 5' (1.5m) lengths. Cover packed twenty 5' (1.5m) lengths per carton. Finish - Fog White

Category: Small 2-Piece Metallic Raceway Covers

RFBA 2G 4G 4 IN CIRC EXTEN RING

Category: Recessed Compartment Box Covers

WMD LEGFBUSBN ROUND USB WOOD

Category: Assembled Recessed Round Boxes

Closes off end runs of 5400 Series Raceway. Has four 1/2" trade size KOs for end feed. White

Category: 2-Piece Non-Metallic Raceway End Fittings

One-gang 3/4" trade size conduit housing assembly. Includes junction box attached to 3/4" trade size conduit for electrical power connections. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Poke-Through Mounting Plates

Unit includes four prewired 20A receptacles. Each duplex receptacle is wired as separate circuit. The duplex can be wired as a standard receptacle or isolated ground. Finish flange available in gray (GY), black (BK), ivory (VY) or brushed metal finishes in aluminum (AL), and brass (BS). Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum colored slide holder (AA). Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes Ortronics TracJack Mounting adapters and Ortronics Series II Communication Housing. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC4 Series Poke-Thru Devices require a 4 (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC4 Assembled Unit-Brass Finish Flange Nonmetallic Colored Brass Slide Holder, 2-20A Duplex Standard or IG and Cat 6 Connectors.

Category: Assembled Poke-Through Units

Ratchet-Pro 881 Series Multiple Service Floor Box Cover Kit, For 881 PVC Floor Box, Kit Complete With Prewired 20 Amp Duplex Receptacle (Receptacle Can Be Wired As Standard Receptacle or Isolated Ground), Flange And Slide Holder, 881ADP Adapter, and 881DIV Divider, Provided with Wiremold CM Series Open System Unloaded Adapters, Ortronics Series II and TracJack Adapters, Modular Jacks Sold Separately, CAUTION: Not For Use On Concrete Pours Less Than 4 1/2'' (114mm) Deep, Not For Use When Concrete Is The Finished Floor, Use Only For Tile, Carpet, Or Wood Covered Floors

Category: Round Recessed Box Covers

The Wiremold Corduct 1200, 1400, and 1600 Series Overfloor Cable Protection Systems conceal wires and cords creating a smooth, trip-free surface instantly. Corduct can be applied to any flooring system with pressure-sensitive tape. Yellow

Category: Non-Metallic Overfloor Raceway

Accepts 15A and 20A duplex receptacles and 106 style frame. Includes mini adapter that accepts Pass and Seymour Activate inserts or Wiremold Open System communications modules. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 4-Gang Raceway Box Covers

Poke-Thru Insert Assembly, RC4 Series, No Cover w/ Disposable Plate, Device Type: (4) 20 Amp Receptacles, For Use with Tile, Carpet or Wood Flooring, Use with RC4C Cover Assemblies.

Category: Assembled Poke-Through Units

Floor Box Cover, 1-Gang, Non-Metallic, Cover Type: Dual Service. Device Type: Communication Cable. Color: Brown.

Category: Square / Rectangle Recessed Box Covers

Floor Box Cover, 1-Gang, Non-Metallic, Accepts three (3) 2A Activate inserts.

Category: Recessed Floor Box Service Fittings

Steel, Prewired Plugmold, Tamper-Resistant, 5 Foot Length, Black. Outlets (6") O/C: Total Outlets: (12) GFCI, 15A, 125V: Single Circuit, Single Outlets. Built-in GFI Breaker.

Category: Single Circuit Tamper Proof Plugmold

1/2" trade size KOs located on end, sides, and bottom of fitting. 3/4" KOs on bottom and rear. Includes ground screw. Gray

Category: Small 2-Piece Metallic Raceway End Fittings

2000 Raceway Base and Cover, 5' Length, Steel, White

Category: Small 2-Piece Metallic Raceway Bases & Covers

Steel, Cover Only. Color: Ivory. Add-On Cover for 25DTP Series Poles – (3) Duplex Receptacles.

Category: Steel Power Poles

Steel, Wall Box Connector, 4000 Series. Size: 12" Length. Includes: (2) 1/2", 3/4", 1", 1-1/4" Trade Size KOs, (2) 2-9/16"x1-11/16" Rectangular KOs. Ivory.

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Non-Metallic, 6A, Mini Adapter Bezel Opening. Black.

Category: 1-Gang Raceway Box Extension Adapters

Raceway Ground Clamp, 2400 Series

Category: Small 2-Piece Metallic Raceway Grounding Clamps

.040" (1.0mm) steel, 5' (1.5m) lengths. Base packed twenty 5' (1.5m) lengths per carton. Finish - Fog White

Category: Small 2-Piece Metallic Raceway Bases

6063-T5 extruded aluminum, satin anodized finish, .075" (1.9mm) wall thickness. This cover is packed four 10' (3m) lengths per carton.

Category: Plugmold Covers

Installs commercially available straight blade and locking single receptacles with face diameters of 1.56" - 1.57" (approximately (40mm)) into 3000 Series Raceway. G3007C Device Bracket included. NOTE: Certified to Canadian Safety Standards for sale in Canada. When ordering these products, change the "V" color prefix to "CV" or the "G" color prefix to "CG" to denote the Canadian versions. Gray

Category: 1-Gang Raceway Device Brackets & Plates