"CCP2RL-3-30CC"

35-Piece Screw-driving Kit. Includes: (11) 1" Philips IMPACT READY® Bits: PH1, (9) PH2, PH3, (6) 1" Square IMPACT READY® Bits: SQ1, (4) SQ2, SQ3, (6) 1" Star IMPACT READY® Bits: (3) T20, (3) T25, (4) IMPACT READY® Socket Adapters: 3/8", 7/16", 1/2", 9/16", (3) IMPACT READY® Nutsetters: 5/16", 3/8", 1/4", (2) 1" Slotted Bits: SL6, SL8, (1) IMPACT READY® 1/4" Hex Shank Adapter, (1) 3" IMPACT READY® Screw Lock Holder, (1) 2" PH2 IMPACT READY® Bits

Category: Drill / Power / Insert Bit Kits

K Series Ring Terminal, 2/0 AN-3/0 AWG, 2.08 IN, Tubular Barrel, Copper, Metallic

Category: Non-Insulated Ring Tongues

SWIVEL IMPACT DRIVER SOCKET 3-PIECE

Category: Sockets & Socket Sets

45 Amp Fuse, Rejection, Brand or Series: Class RK5, Interrupting Rating: 200000 Amp VAC RMS Symmetrical, 20000 Amp VDC, Terminal Type: Cartridge, Rejection, Dimensions: 13/16 Diameter x 3 Length Inch, Voltage Rating: 250 VAC/125 VDC, Features: Time Delay, Dual Element

Category: Class RK5 Fuses

Disconnect Switch, Operating Mechanism, Handle, Flange Mount, 6 Inch, NEMA 1/3/3R/4/12

Category: Molded Case Circuit Breaker Operating Handles

Panduct Wide Slot Wiring Duct, Type G, 3.25" W x 4.10" H x 6' L, Lead Free PVC, White ***SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT***

Category: Standard Density Wire Duct

Breaker Molded Case, Lug Kit, 3 x 3/0 - 500 MCM, Cu/Al, Single Lug, for K1200/TB8

Category: Molded Case Circuit Breaker Lug Kits

AB 700-HA32Z48-3-4 700-HA GENERAL

Category: 8-Pin Ice Cube Relays

Interface Module, Digital, 40 Point, 24 Volt AC/DC, LED Indicators, with Sensor

Category: PLC Interface Modules

Mechanical Lug, Type ADR, 2 Hole, 3/8 Inch Stud,, 3 Conductor, 14 - 1/0 AWG, Aluminum With Tin Plating, Dual Rated for CU/AL

Category: 3-Conductor Aluminum Mechanical Lugs

Safety Switch, Heavy Duty, Fused, Viewing Window, Type 3R, 600 Volt AC/DC, 30 Amp, 3-Pole, Neutral Installed

Category: 3-Pole 600 Volt Fused Heavy Duty Safety Switches

Decorator 3-Way Switch, 20A, 120/277V, White, Back & Side Wire

Category: 20 Amp Commercial Grade Decorator Switches

Flat Plate Fitting, 4 Holes, Hole Diameter: 9/16 in, Material: Steel, Finish: Electro Galvanized.

Category: Flat Plate Strut Channel Connectors

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRCA Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (3) 3/4 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof C Conduit Outlet Boxes

Assembled, 30.5 mm, Heavy-Duty, Push-Pull Unit, Red Standard Operator, 2 Position, Operating Mode: Maintained Push, Maintained Pull, 40 mm, Non-illuminated, 600V Rated, 1 NO & 1 NC Contacts. NEMA Rating: 3, 3R, 4, 4X, 12, 13. Includes: (2) Square Engraved Legend Plates: Emergency Stop and Stop.

Category: 30mm Push-Pull Pushbutton Operators

Mounting Hood for Mercmaster III, Ceiling, 3/4 Inch Hub ***Mounting Hood Only, Modules Sold Separately***

Category: Fixture Mounting Frames & Kits

Contactor, IEC, 23 Amp, 3-Pole, 24 Volt DC Coil with Integrated Diode, 1 Normally Closed, Auxiliary Contact

Category: IEC Contactors - DC Operating

AB 1497-F-CXSX-3-N CONTROL CIRCUIT

Category: 250 - 450 VA Industrial Control Transformers

AB 700-HA32A2-3 700-HA GENERAL

Category: 8-Pin Ice Cube Relays

5 KVA, 1-Phase, 240 x 480 Primary Volts - 120/240 Secondary Volts, NEMA 3R, Shielded Automation Transformer, Encapsulated,60 Hz. HxWxD: 17.00" x 14.00" x 9.00". ***For use with 3-Phase Source by connecting primary to any two wires of a 3-Phase System***

Category: 5 KVA Dry Type Transformers

FSS Box, Weatherproof, Dead-End, 1-Gang, With Lugs, 3/4 Inch, Non-Metallic

Category: 1-Gang Non-Metallic FS & FD Device Boxes

Mechanical Lug, Aluminum, 4 Barrel, 4 Hole Mount, Dual Rated for Copper or Aluminum, 6 AWG to 350 MCM, Bolt Hole: 9/16 Inch, Hole Spacing: 1-3/4 Inch, (1) Hex Socket Set Screw per Conductor

Category: 4-Conductor Aluminum Mechanical Lugs

Switch. Disconnect, Enclosed, ABS Thermoplastic, 32 Amp, 500 Volt AC, 3 Pole, 2 Position, Red/Yellow Knob, Base/DIN Rail Mount

Category: Enclosed Non-Fusible Disconnect Switches

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-5/8 IN Body Diameter X 4-3/8 IN Overall Length, 2-7/16 IN Turning Radius, 3.75 OZ Sealing Compound Required, 1/8 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings