"wiremold"

Non-Metallic Floor Molding, 1400 Series. Size: 10' Length, 3" Width, 20/32" Height. Color: Black.

Category: Non-Metallic Overfloor Raceway

Non-Metallic, 1-Gang, Deep Device Box, 2300 Series. Size: 4-3/4" Length, 3" Width, 1-3/4" Depth. PVC, Ivory.

Category: 1-Gang Raceway Device Boxes

Wmd 6aap 1 1/2-gang Extron Aa

Category: Recessed Floor Box Service Fittings

Device plate that will accept up to two (2) Extron Electronics MAAP device plates. For use in either of the two side compartments only. Not for use in the center compartment. Extron devices supplied by others.

Category: Poke-Through Mounting Plates

WMD RFBAAAP RFBA AAP DEVICE P

Category: Recessed Compartment Box Device Plates

WLK 6ATC2PCRBK 6IN PRWRD SURF

Category: Assembled Poke-Through Units

Device Cover for AL3000 Series Raceway, Duplex 5-20R

Category: Large 2-Piece Metallic Raceway Cover Plates

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. NOTE: Add suffix “TR" to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. "NA" indicates North American made and complies with the Buy American Act, NAFTA, and ARRA requirements.

Category: Square / Rectangle Recessed Box Covers

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Black

Category: Assembled Poke-Through Units

Cover Plate, Powder-Coated Aluminum, 3/4" Plugs, Color: Bronze

Category: Square / Rectangle Recessed Box Covers

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling. NOTE: Add suffix ôTRö to the end of the part number to indicate tamper-resistant cover assembly. Tamper-resistant versions are secured with a single tamper-resistant screw. Gray

Category: Square / Rectangle Recessed Box Covers

Kit Comes Complete With Adapter Ring To Secure Into The Boxes, (1) 3/4" Trade Size Screw Plug And Conduit Fitting For Power, 1-1/4" Trade Size Screw Plug And Conduit Fitting For Low Voltage (Communications Or Audio/Video) Services

Category: Round Recessed Box Covers

W-mold 437-11/2 Attaching Rin g

Category: Recessed Floor Box Service Fittings

EMT Connector to 5700 Series Boxes, 1/2 Inch

Category: Metallic Raceway Connectors & Adapters

.050" (1.3mm) stainless steel. Base has two 9/32" (7.1mm) diameter KOs 1 1/4" (32mm) from each end and every 18" (457mm) on center throughout. Available in 10' (3m) lengths. Also available in lengths precut to customer specifications.

Category: Large 2-Piece Metallic Raceway Bases

Floor Box, 8-Gang, Dimensions: Height: 11-3/16 Inch, Width: 15-1/8 Inch, Depth: 6 Inch, Material/Finish: Steel, Cubic Inches: 246

Category: Square Recessed Floor Boxes

Nonmetallic sleeve attaches to structural decking and maintains 8" - 8 1/8" diameter cast in hole. Unit includes three (3) attachment legs, two (2) end caps and three (3) thumb screws.

Category: Recessed Floor Box Tools

6' Steel Plugmold Multioutlet Strip with 6 duplex receptacles spaced at 12", GBA Finish - Ivory

Category: Dual Circuit Steel Plugmold

Non-Metallic, Modular Furniture Adapter, 5500 Series. Size: 4-1/4" Length, 1-7/8" Width. PVC, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Single-gang device plates in sectional widths. SSR1 has an opening of 1.39" [35.31mm].

Category: 1-Gang Raceway Device Brackets & Plates

WMD EFBCMG EVOLUTION FLR BOX

Category: Recessed Floor Box Tools

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum with Brushed Aluminum Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Includes insert stem with disposable plate and two-gang service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly. Shown assembled. Service head is shipped unassembled with the insert stem. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Requires a minimum 3 1/16" (78mm) diameter hole.

Category: Assembled Poke-Through Units

Ten 20A outlets with t-slots, 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 4" (101mm). 20 Amp unit with a 20A resettable circuit breaker. Units available with straight blade or Locking Plug.

Category: General Duty Power Strips