"wiremold"

<p>Dual-service fitting includes housing, base, two mounting frames, divider, and mounting hardware. For use on one No. 2 and one No. 4 Duct. Has 1/2'' and 3/4'' trade size conduit knockouts on each end. 104.3 cu. in. (1709cm3) capacity.</p>

Category: Recessed Floor Box Service Fittings

6' Steel Plugmold Multioutlet Strip with 4 single receptacles spaced 18", GB Finish - Ivory

Category: Single Circuit Steel Plugmold

6' Steel Plugmold Multioutlet Strip with 6 duplex receptacles spaced at 12", GBA Finish - Ivory

Category: Dual Circuit Steel Plugmold

Non-Metallic, Modular Furniture Adapter, 5500 Series. Size: 4-1/4" Length, 1-7/8" Width. PVC, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Single-gang device plates in sectional widths. SSR1 has an opening of 1.39" [35.31mm].

Category: 1-Gang Raceway Device Brackets & Plates

WMD EFBCMG EVOLUTION FLR BOX

Category: Recessed Floor Box Tools

Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Aluminum with Brushed Aluminum Flange. Diameter: 7-1/2 Inch. Depth: 9 Inch. Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Ortronics TracJack Mounting Bezel & (2) Ortronics Series II Communication Housing (Devices Sold Separately). For use with Carpet or Tile Applications.

Category: Assembled Poke-Through Units

Includes insert stem with disposable plate and two-gang service head with housing, base, scrub water gasket, and barrier. Service head and insert install together to make a poke-thru assembly. Combine with faceplates (sold separately) to complete service head assembly. Shown assembled. Service head is shipped unassembled with the insert stem. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. Requires a minimum 3 1/16" (78mm) diameter hole.

Category: Assembled Poke-Through Units

Ten 20A outlets with t-slots, 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 4" (101mm). 20 Amp unit with a 20A resettable circuit breaker. Units available with straight blade or Locking Plug.

Category: General Duty Power Strips

Used to separate services in the center and outer compartments. Includes one (1) center compartment and one (1) external compartment.

Category: Recessed Floor Box Service Fittings

Recessed Unwired Flush Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Floor Box Activation with Brass Flange

Category: Assembled Recessed Round Boxes

Mounting Bracket for Evolution 8-Gang Floor Box

Category: Recessed Floor Box Service Fittings

RC4 SLIDE HOLDER BK

Category: Poke-Through Cover Assemblies

Kit comes complete with adapter ring to secure into the boxes, (1) 3/4" trade size screw plug and conduit fitting for power, 1-1/4" trade size screw plug and conduit fitting for low voltage (communications or Audio/Video) services.

Category: Round Recessed Box Covers

W-mold 1230al Alum Abandon plate

Category: Recessed Floor Box Plate Plugs

<p>Adjusting ring (with three adjusting screws) for use with 437 Attaching Rings - communication only (brass and polycarbonate fittings) and power for polycarbonate fitting only. 3 25/32'' (96mm) O.D.</p>

Category: Recessed Box Adapters

Connects end of 3000 Series Raceway to 1 1/2" trade size conduit or armored cable.

Category: Metallic Raceway Connectors & Adapters

WMD G20GB606TR

Category: Single Circuit Tamper Proof Plugmold

For installation of one rectangular receptacle. Complete with necessary bridges.

Category: Large 2-Piece Metallic Raceway Cover Plates

For branch raceway at right angles. Provides 2" (51mm) cable bend radius control for fiber optic and UTP/STP cable installations. Couplings included. Ivory

Category: Small 2-Piece Metallic Raceway Tee Fittings

Accepts six Ortronics TracJack inserts. Finish - Ivory

Category: 1-Gang Raceway Box Extension Adapters

End Ftg W/ 1/2 In.& 3/4 In. Ko

Category: Plugmold End Fittings

WMD 6CFFTCSB

Category: Poke-Through Cover Assemblies