"DE_CS.1626215/A"

Drive, PowerFlex 527, with Embedded Dual Port EtherNet/IP and Integrated Safety, 480 Volt AC, 3-Phase, 3 Horse Power, 2.2 kW Normal Duty, 3 Horse Power, 2.2 kW Heavy Duty, Frame A, IP20 NEMA / Open Type, Filter

Category: 480 Volt AC Operated General Purpose Variable Frequency Drives

Auxiliary Contact Block, Front Mounted, 1 Normally Open, Without Spring Clamp Terminals

Category: Manual Motor Protector Auxiliary Contact Blocks

Wiring Duct, Type G, Wide Slot, 1" W x 1" H x 6' L, PVC, Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Smart EV Charger, (Level 2), Pulsar Plus 48A, 11.5kW, 208/240V, w/25 Foot Cord, Adjustable Power up to 48 Amps, Power Sharing Enabled, WiFi/Bluetooth, Amazon & Google Assistant, Hardwired Only, Matte Black, 7.8” x 7.9” x 3.9”, Includes Holster

Category: Level 2 Residential Electric Vehicle Chargers

Slotted grommet edging with adhesive lined, .144" thickness, polyethylene, natural.

Category: Grommet Edging

Modbox™ Hybrid Toolbox Is Made With Impact Resistant Polymers And Easily Interconnects For A Customized Mobile Workstation, Fully Removable Lid For Dual Use As An Open Crate, Withstanding A 75-Pound (34 Kg) Carrying Capacity, And Ip64 Rated For Protection Against Debris And Rain, Lid Attaches To The Bottom Of The Toolbox So It’S Always Available When Used As A Crate, Lid Also Attaches To Side Rails When Using The Multi-Hook Rail Attachment (Cat. No. 54816Mb, Sold Separately), Two Adjustable Dividers Offer Flexible Storage; Stack For Deep Storage Or Place Next To Each Other For Shallow Storage, Removable Organizer Tray Included For Extra Organization And Convenience, Steel Reinforced Lock Location For Tool Theft Prevention, Handle Pivots For A Comfortable Top Carry And Conveniently Nests When Connected To Other Modbox™ Components, Built-In Side Rails Allow For Attachments And Easy Access To Frequently Used Items And Tools

Category: Tool Boxes

The vibration resistant male disconnect is made of copper and is nickel-plated. It is barrel insulated in yellow vinyl housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm¦). It is 0.98" (24.9 mm) long and 0.25" (6.4 mm) wide. The disconnect has a funnel entry barrel configuration and a brazed seam barrel. It comes in bottles of 50.

Category: Male Vinyl Insulated Wire Disconnects

Wiring Duct, Type G, Wide Slot, 1/2" W x 1/2" H x 6' L, PVC, Gray, Adhesive, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Wiring Duct, Type G, Wide Slot, 1/2 Inch Wide x 1 Inch Deep x 6 Foot Long, PVC, Gray, Adhesive, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: Standard Density Wire Duct

Fusetron Time Delay Midget Fuse, 6 A, 250 VAC, 200/10000 A, Class CC/Supplemental, Cylindrical Body

Category: Time Delay Midget Fuses

Low Breaking Fast Acting Fuse W/ Nickel Plated Brass Caps, 1 A, 250 V, 35 A, 10 kA, Cylindrical Body

Category: Electronic Fast Acting Fuses

I-BEAM Ladder - Hold-Down Clamp & Expansion Clamp

Category: Straight Aluminum Liquidtight Flex Connectors

Narrow Slotted Duct, PVC, Gray, 1.5in X 4in X 6ft, Adhesive Back, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Aluminum Neutral Bar, Dual Rated, Conductor Range 4-14, 8 Ports, 2 Holes, #10 Bolt, Headed Slot Drive, UL, CSA

Category: Load Center Neutral & Ground Bars

A-Series Panel boards. Pro-Stock, Unassembled Lighting Panels. Standard. Select a front of the correct height. F76S A-SERIES FRONT

Category: Panelboard Trims

Liquidtight Sealing Gasket, 2-1/2 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure

Category: Liquidtight Connectors - Accessories

Accessory frame bracket for mounting module level electronics to standard module frames.

Category: Solar Mounting Hardware

Chase Nipple, 1 Inch, Material: Zinc Die Cast, For Use With a Conduit Coupling to Connect Conduit to a Box, or With a Locknut to Connect Two Boxes

Category: Zinc Die Cast Chase Nipples

Tamper resistant two-piece latching surface raceway. Supplied with pre-punched mounting holes and factory applied adhesive tape. Available in 6', 8', and 10' lengths, International Gray, Length 10.00 ft, Width 1.52 in.

Category: 1-Piece Non-Metallic Raceway

Conduit Body, Type: C, FM85, Size: 1-1/4", Material: Copper Free Aluminum.

Category: Type C Aluminum Conduit Bodies

LED Microwave Occupancy/Daylight Sensor, Input: 12 Volt DC, Output: 0-10 Volt DC, Hold Time: 1 Minute

Category: Passive Infrared Fixture Mount Occupancy Sensors

4-Way Adhesive Cable Tie Base, 1.12" Long x 1.12" Wide, Nylon 6.6, White, Package of 500

Category: Cable Tie Bases

Modbox™ Wire Spool Dispenser Is Essential For Efficiently Transporting And Pulling Wire At The Jobsite, Reducing Downtime, Holds Up To Four 500-Foot Spools Of 10Awg Wire Inside, Add Additional Spools Outside Via A Through-Hole For Conduit, Open Front Design Allows Easy Pulls And Quick Inventory Checks During Wire Installs, Features Front Guides For Smooth Wire Pulling And A Wire Capture System To Prevent Unraveling Between Pulls To Optimize Wire Deployment, Lid With Metal Kickstand Stays Open For Vertical Ceiling Pulls, Ensuring Easy Access To Wire, Durable Construction From Impact-Resistant Polymers Supports Up To 120 Pounds, With A Steel-Reinforced Lock Location On The Lid For Security, Built-In Side Rails Accommodate Attachments And Connect With Other Modbox™ Components, Creating A Customizable Mobile Workstation Tailored To Your Needs, Rubber Plugs Offer Extra Support For Reel Stability During Wire Pulling

Category: Mountable Wire Dispensers

Back to Back Strut, 3-1/4 x 1-5/8", 20' Length, Steel/Pre-Galvanized

Category: Steel Back-To-Back Strut