Search results

Conduit Body, Type: LL, FM8, Size: 2-1/2 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type LL Conduit Bodies

Conduit Hub with Ground Screw, Size: 3-1/2 inch, Material: PVC Coated Steel.

Category: PVC Coated Conduit Hubs with Ground

NIPPLE GALVANIZED RIGID PVC COATED 4X6

Category: PVC Coated Nipples

ROB PBC149-3 3 PIPE STRAP

Category: PVC Coated Conduit Support Straps

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type C Conduit Bodies

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90° Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type C Conduit Bodies

Conduit Body, Type: LB, FM8 Mark 9, Size: 4 inch, Material: PVC Coated Aluminum. Includes: Cover & Gasket.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond OE Series Conduit Outlet Boxes are installed in hazardous location conduit systems to serve as pulling and splicing fittings, to connect runs of conduit, to change the direction of a conduit run, or to provide access to conductors. They are provided with covers. Electrical continuity of the conduit system is maintained across assembled joints."

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Hanger Rod Beam Clamp : to attach a single all thread rod to a beam or structural member

Category: PVC Coated Conduit Support Straps

Robroy Pruny605sa 2" Pvc coated Alum. Union

Category: PVC Coated Female-Male Unions

Plasti-bond Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles,each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90º Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A Mounting Outlet For Wiring Devices Or Lighting Fixtures Etc. Electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LL Conduit Bodies

ROB PBU-BOLT-3 3 COATED STEEL U-BOLT

Category: PVC Coated Conduit Support Straps

ROB PBRA-2-1/2 2-1/2 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

ROB PRNIP-AL-1X2-1/2 1X2-1/2 AL NIPPLE

Category: PVC Coated Nipples

ROB PRC29 3/4 AL MARK 9 C FITTING

Category: PVC Coated Type C Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PR5257GRAL 2 90 LT CONN W/GRN AL

Category: 90 Degree PVC Coated Type LT Connectors

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRNIP-AL-2X10 2X10 AL NIPPLE

Category: PVC Coated Nipples

ROB PRHNIP-1-1/4X5 1-1/4X5 NIPPLE

Category: PVC Coated Nipples

ROB PRLB29 3/4 AL MARK 9 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond mogul style conduit bodies are offered in numerous configurations to provide a complete coated conduit system. Mogul BG Covers are sold separately. Mogul style fitting bodies have long openings and may be used to make bends in conduit runs, for pull outlets for stiff conductors, to provide additional room for taps or splices, etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PR970SA 3-1/2 - 4 FORM 7 COVER

Category: PVC Coated Conduit Body Covers