Search results

ROB PRNIP-AL-2-1/2X4 2-1/2X4 AL NIPPLE

Category: PVC Coated Nipples

ROB PRNIP-AL-1X12 1X12 AL NIPPLE

Category: PVC Coated Nipples

4 Form 7 Lb Fitting

Category: PVC Coated Type LB Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRHNIP-3X5 3X5 NIPPLE

Category: PVC Coated Nipples

Liquidtight Connector, 90° Angle, Size: 2-1/2 inch, Material: PVC Coated Steel.

Category: 90 Degree PVC Coated Type LT Connectors

Liquidtight Connector, Straight Angle, Size: 4 inch, Material: PVC Coated Steel.

Category: Straight PVC Coated Type LT Connectors

PVC Coated Nipple, 2-1/2 Inch x 12 Inch, Steel

Category: PVC Coated Nipples

RRYPBC105312 3 1/2 PIPE STRAP

Category: PVC Coated Conduit Support Straps

1 SERVICE ENTRANCE ELBOW

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prlbd3300 1 Pulling Elb

Category: PVC Coated Type LB Conduit Bodies

Rry Prstag4 1 1/4" Pvc Ctd alum. Grounding Hub

Category: PVC Coated Conduit Hubs with Ground

Plasti-Bond PVC coated beam clamps are used to securely support conduit runs by attaching them to beams, angles, trusses and other structural members. Hanger Rod Beam Clamp : to attach a single all thread rod to a beam or structural member

Category: PVC Coated Conduit Support Straps

ROB PRNIP-AL-2-1/2XCL 2-1/2XCLOSE AL NIPPLE

Category: PVC Coated Nipples

ROB PRSTG11 5 KNOCKOUT HUB W/GRND

Category: PVC Coated Conduit Hubs with Ground

Plasti-Bond split couplings are used to connect two pieces of conduit where the conduit can't be turned because of limited clearance between runs or a wall or other obstruction.

Category: PVC Coated Split Couplings

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LL Conduit Bodies

ROB PR5348GR 2-1/2 45 CONNECTOR W/GRND

Category: 45 Degree PVC Coated Type LT Connectors

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type X Conduit Bodies

Female/Male Union, Size: 3-1/2 inch, Material: PVC Coated Steel.

Category: PVC Coated Female-Male Unions

ROB PRSTAG10 4 AL KNOCKOUT HUB W/GRND

Category: PVC Coated Conduit Hubs with Ground

ROB-R PRHNIP3X10 PVC NIP

Category: PVC Coated Nipples

Plasti-Bond reducing couplings are used to connect two pieces of conduit of different size. They are available in 17 different size combinations."

Category: PVC Coated Couplings

ROB PRT889 3 AL MARK 9 T FITTING

Category: PVC Coated Type T Conduit Bodies