Search results

ROB PRREC54SA 1-1/2 - 1-1/4 AL REDUCING COUPLING

Category: PVC Coated Couplings

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

3/4 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PRLR97 3-1/2 FORM 7 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

RRY PBPS55S-2 1-1/2 PIPE STRA

Category: PVC Coated 2-Hole Conduit Straps

PVC coated Form 8 conduit bodies with covers are offered in numerous configurations to provide a complete coated conduit system.Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Conduit Body Covers

ROB PRBUB10SA 4 AL BUB FITTING MOGUL

Category: PVC Coated Conduit Body Covers

1/2 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PR889 2-1/2 - 3 MARK 9 COVER

Category: PVC Coated Conduit Body Covers

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 45 Degree PVC Coated Type LT Connectors

ROB PRTB39 1 AL MARK 9 TB FITTING

Category: PVC Coated Type TB Conduit Bodies

ROB PRCPLG-AL-3-1/2 3-1/2 AL COUPLING

Category: PVC Coated Couplings

RRY PRC39 1 AL MARK 9 C FITTI

Category: PVC Coated Type C Conduit Bodies

ROB PREYD1 1/2 F/F SEALING FITTING W/DRN

Category: PVC Coated Type EYD Sealing Fittings

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

ROB PBPAR-3 3 PARALLEL BEAM CLAMP

Category: PVC Coated Parallel Beam Clamps

1-1/2 Malleable 90 Fem/fem Elbow

Category: 90 Degree PVC Coated Type LT Connectors

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs with Ground

RRY PRX47 1 1/4 X BODY

Category: PVC Coated Type X Conduit Bodies

Conduit Body, Type: LL, FM8, Size: 3 inch, Material: PVC Coated Iron. Includes: Cover & Gasket.

Category: PVC Coated Type LL Conduit Bodies

3 Mall 1 Hole Pipe Strap

Category: PVC Coated 1-Hole Conduit Straps

Rry Prbg48 1-1 1/4 Bg Cover mogul

Category: PVC Coated Conduit Body Covers