"14/2 nm-b"

PVC Coated Explosion and Dust-Ignition Proof UNY Male Union, Pipe Size 1-1/2 Inch/41 Metric, 3 Piece, for Hazardous and Non-hazardous Locations, Overall Length 3.63 Inch/92.20 Millimeters, Overall Diameter 3.06 Inch/77.72 Millimeters, Electrogalvanized Steel,Gray

Category: PVC Coated Female-Male Unions

THB EYS5-TB 1-.5 IN EYS DRAIN

Category: PVC Coated Type EYS Sealing Fittings

OCA 2HS3-G PVC CTD PIPESTRAP

Category: PVC Coated 2-Hole Conduit Straps

PVC Coated Explosion and Dust-Ignition Proof UNY Male Union, Pipe Size 3-1/2 Inch/91 Metric, 3 Piece, for Hazardous and Non-hazardous Locations, Overall Length 5.50 Inch/139.70 Millimeters, Overall Diameter 5.69 Inch/144.53 Millimeters, Electrogalvanized Steel, Gray

Category: PVC Coated Female-Male Unions

OCA NPL1X2-B PVC CTD COND NIP

Category: PVC Coated Nipples

O-cal Ss114 1 1/4" Alum Pipe strap Pvc Ctd Grey

Category: PVC Coated Conduit Support Straps

Conduit Body, Type: TB, FM7, Size: 1 inch, Material: PVC Coated Aluminum. Includes: Cover & Gasket, Dimension A (Inches): 7.25 Dimension B (Inches): 3.25 Dimension C (Inches): 2.08 Dimension D (Inches): 1.38 Dimension E (Inches): 4.5

Category: PVC Coated Type TB Conduit Bodies

PVC Coated Conduit Nipple, 3/4 Inch/21 Metric Pipe Size x 3 Inch/76.2 Millimeters Nipple Length, Nominal .002 Inch (2 mil) Blue Urethane on Interior, Minimum .040 Inch (40 mil) PVC Coating on Exterior, Blue Urethane Coating Over Threads, Rigid Aluminum, Gray

Category: PVC Coated Nipples

PVC Coated One Hole Pipe Strap, 2 Inch/53 Metric Pipe Size, Aluminum, Gray

Category: PVC Coated 1-Hole Conduit Straps

CCD PV2000680F 680F 2IN FORM 8 COVER - PVC COATED

Category: PVC Coated Conduit Body Covers

THB EYS91-TB 3-1/2DRAIN SEAL

Category: PVC Coated Type EYS Sealing Fittings

CLB PV35001S00 3-1/2" - 1 HOL

Category: PVC Coated 1-Hole Conduit Straps

REC31 1IN - 1/2IN RED CPLG PVC CTD

Category: PVC Coated Couplings

Plasti-bond Pulling Elbows Are Used At 90° Bends In Conduit Runs To Allowstraight Pulls At Bends, To Serve As Pull Outlets For Stiff Conductors, To Allowfor Service Entrance Into Buildings Or To Allow Conductor Entrance Into Motors.electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Expansion Couplings

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type C Conduit Bodies

Perma-Cote conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a

Category: PVC Coated Type LR Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

Perma-Cote, Hub, ST, Knockout, Dimension A: 2.660 IN, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Pipe Size: 1 IN, Dimension B: 2.500 IN, Dimension C: 230 IN, Maximum Wall Thickness: 0.250 IN, Material: PVC Gasket, Includes: O-Ring Gasket, Enclosure Wall

Category: PVC Coated Conduit Hubs

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type T Conduit Bodies

Perma-cote Pvc Coated Pipe Straps Are Used To Securely Mount Conduit To A Wall Or Other Structure For Support. They Are Available In Two Styles: A One-hole Malleable Iron Strap Or A Two-hole Stamped Steel Strap. Mounting Hardware Not Provided.

Category: PVC Coated Conduit Support Straps

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

Perma-Cote, Conduit Body And Cover, Form: C Form 7, Width: 1.640 IN, Length: 7.500 IN, Height: 1.670 IN, Material: Ferrous Body, Stainless Screw, Finish: 40 MIL Gray PVC Exterior Coating, 2 MIL Green Urethane Interior Coating, Pipe Size: 3/4 IN, Dimension D: 1.130 IN, Dimension E: 3.810 IN

Category: PVC Coated Type C Conduit Bodies

GLL Grounding Bushings GLL style PVC coated threaded grounding bushings have an aluminum lug for copper or aluminum grounding conductors. RE Reducers RE style reducers reduce conduit hubs to a smaller size. They are provided with an integral bushing to pr

Category: PVC Coated Reducing Bushings