"12/2 nm-b"

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies

ROB PREYD3SA 1 AL EYD SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

ROB PR5254GRAL 1 90 LT CONN W/GRN AL

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRNIP-AL-1X2 1X2 AL NIPPLE

Category: PVC Coated Nipples

ROB PRLR39 1 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PBRA-3 3 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

ROB PRNIP-AL-1-1/2X6 1-1/2X6 AL NIPPLE

Category: PVC Coated Nipples

Perma-cote; Pipe Strap; Finish: 20 Mil Gray Pvc Exterior Coating; Includes: Hardware; Pipe Size: 1 In; Material: Ferrous Body; Gauge Metal: 14 Awg; Standard Pack: 100

Category: PVC Coated Conduit Support Straps

ROB PRLR29 3/4 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PRNIP-AL-1-1/4X10 1-1/4X10 AL NIPPLE

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

Rob-r Preyd3 1 F/f Sealing Fi

Category: PVC Coated Type EYD Sealing Fittings

ROB PR5255GRAL 1-1/4 90 LT CONN W/GRN AL

Category: 90 Degree PVC Coated Type LT Connectors

Plasti-Bond pulling elbows are used at 90 degree bends in conduit runs to allow straight pulls at bends, to serve as pull outlets for stiff conductors, to allow for service entrance into buildings or to allow conductor entrance into motors. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRHNIP-1X5 1X5 NIPPLE

Category: PVC Coated Nipples

ROB-R PBPS100M 4 MALL 1 HOLE

Category: PVC Coated 1-Hole Conduit Straps

PCP PM4Q125LT 1-1/4 ST LT CONNECTOR W/GROUND

Category: Straight PVC Coated Type LT Connectors

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type T Conduit Bodies

ROB PR5240AL 4 STRAIGHT LT CONN AL

Category: Straight PVC Coated Type LT Connectors

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRNIP-AL-1X4 1X4 AL NIPPLE

Category: PVC Coated Nipples

ROB PREYD36 1 M/F SEALING FITTING

Category: PVC Coated Type EYD Sealing Fittings

3/8 Liq. Tight Conn 45

Category: 45 Degree PVC Coated Type LT Connectors