Boxes - Recessed

2-Gang, Upper Panel Device Plate, Metallic, Device Type: Blank. For use with AF Series Raised Floor Boxes.

Category: Recessed Compartment Box Device Plates

Single Flushmount Unloaded Keystone Module, Accepts keystone jacks with a latching area of 0.58" x 0.76"

Category: Recessed Floor Box Service Fittings

Poke-Thru Device Cover, Series: RC4, Nonmetallic, Cover Type: Flush, Slide, Material/Finish: Polycarbonate/Black Cover w/ Aluminum Painted Flange. Diameter: 8-1/4", For Use on Tile, Wood, Laminate, or Carpet Flooring.

Category: Poke-Through Cover Assemblies

Assembled unit. Prewired 20A duplex receptacle can be wired as a standard duplex receptacle or isolated ground. Finished with a brushed brass flange and a black device plate. Includes Wiremold Open System unloaded adapters to accept four discrete keystone connectors from most manufacturers. Unit also includes two Ortronics TracJack adapters and two Ortronics Series II adapters. Modular jacks sold separately. NOTE: Assembled with scrub water gasket. For use on tile or carpet floors. RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum. Finish - Brass

Category: Assembled Poke-Through Units

Brass Tile Fl 3-gang Ombx Series

Category: Square / Rectangle Recessed Box Flanges

4-1/4" Round Cover, Metallic, Diameter, (2) 1-1/2 Inch Screw Plugs, Furnished With Gaskets and (3) Screws, Color: Brass

Category: Round Recessed Box Covers

Exterior Box Cover Assembly L6-30R – Exterior box cover assembly prewired with (1) 30A L6-30R, 240 V corrosion-resistant receptacle, Brown

Category: Poke-Through Cover Assemblies

Service Fitting, Type: 4-Piece, Duplex Receptacle 20A/125V on Both Sides, Material: Aluminum, For Use With Wiremold® 525 Series Service Fittings.

Category: Recessed Floor Box Service Fittings

Barrier Kit, Used To Separate Power and Communication Wires in Partition Feed Covers, Supplied With Base and Three Extensions To Adjust To Cover Height. For Use With RFB2, RFB2-OG, RFB2-SS, RFB4 and RFB4-SS Floor Boxes.

Category: Recessed Floor Box Service Dividers

Steel Single Gang Floor Outlet Box

Category: Square Recessed Floor Boxes

AF Series Double-Gang Plate, 1 Duplex, 1 Blank

Category: Recessed Compartment Box Device Plates

WLK 44DP 4IN EVO DUP REC DEVI

Category: Poke-Through Cover Assemblies

WMD EFB6810BTCSB EVO FLR BX S

Category: Recessed Compartment Box Covers

HUB PT7XC FRPT FITTING, 3"

Category: Assembled Poke-Through Units

HUBBELL FB2536

Category: Assembled Recessed Round Boxes

S1R FB 4 COVER BLACK POWDER COAT

Category: Round Recessed Box Covers

RFBA 4G 2.5 IN CIRC CVR FLOOR BOX

Category: Round Recessed Floor Boxes

WMD RFBA6R30 RFBA 6G 3.0 IN R

Category: Recessed Compartment Boxes

REC CFB 4-G EXTEND 3.0IN D

Category: Recessed Compartment Boxes

S1R 4 SUB-PLATE 1.56 INCH LOCKING OPEN

Category: Recessed Box Adapters

Wmd 6aap 1 1/2-gang Extron Aa

Category: Recessed Floor Box Service Fittings

6IN SURFACE STYLE CVR ASSEMBLY SB

Category: Poke-Through Cover Assemblies

BRYANT RCT200CH 15A KIT KTCN

Category: Assembled Recessed Countertop Boxes

Poke-Thru, Tamper-Resistant, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies