Boxes - Recessed

Used for floor coverings greater than 3/16" (4.7mm). This tile shim allows the finished cover assembly to be flush with the finished floor. Includes one (1) 1/16" (1.6mm), one (1) 1/8" (3.2mm) and one 1/4" (6.4mm) tile shim for 9/16" (14.3mm) of upward adjustment.

Category: Recessed Floor Box Tools

Device Plate, Galvanized Steel, Duplex Receptacle, For use with Four Gang Recessed Service Floor Box, 126 Cubic Inches for Device Access and 40 Cubic Inches for Device Compartments, Length 5-3/4 Inches, Width 2-3/4 Inches, Depth 2-1/2 Inches, 3/4 Inch and 1-1/4 Inch Knockouts, Galvanized Steel, Delivers Power, Communications and Data from Standard Conduit with No Exposed Service Fittings

Category: Recessed Floor Box Service Fittings

8/10-Gang AFB Series, 5.50" Deep Rectangular Box with Installation Cover

Category: Square Recessed Floor Boxes

Poke-Thru Device, Flush, Assembled Unit, Nonmetallic Cover, Color: Brushed Brass Flange with Aluminum-Colored Cover. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with Carpet, Wood or Tile Applications.

Category: Assembled Poke-Through Units

Hubbell Wiring Device Kellems, SystemOne, Fire-Rated Poke-Throughs,Junction Box

Category: Assembled Poke-Through Units

RAFB 4-G SUB-PLATE DUPLEX

Category: Recessed Floor Box Service Dividers

Recessed Entertainment Box, Old Work, 4-Gang, Non-Metallic, Color: White.

Category: Recessed Home Entertainment Boxes

Closes off unused gangs. NOTE: For RFB2 Series Floor Boxes only.

Category: Recessed Floor Box Service Fittings

In-floor Delivery Systems, Lo-con Series, Plate, Duplex, Stainless

Category: Recessed Floor Box Service Fittings

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Brass

Category: Square / Rectangle Recessed Box Covers

CFB ROUND 6 INCH COVER BLACK

Category: Round Recessed Box Covers

This box has a 5" (127mm) depth design with an extra 2" (51mm) of width for additional wiring capacity and can accommodate four duplex power receptacles on one side. Power plate with duplex knockouts included with box. The communication plate will accept at least three communication adapters for up to 18 ports of activation. Lids rotate 180° for easy orientation. Gray lids are diecast zinc construction. NOTE: For custom options, consult factory. All boxes are sold with one power plate: 4" (102mm) deep boxes have plate with two power duplex receptacle KOs, 5" (127mm) deep boxes have plate with four power duplex receptacle KOs. All communication plates sold separately.

Category: Assembled Recessed Gang Boxes

For RPSFB, RFSFB-OG, and RPNFB floor boxes. Kit comes complete with (2) prewired 20A duplex receptables, (receptables can be wired as standard receptacle, or isolated ground), flange and slide holder, adapter ring to secure into the boxes, divider (RP-DIV), Wiremold CM series open system adapters (unloaded), Ortronics Series II and TracJack adapters. Modular jacks sold seperately.

Category: Round Recessed Box Covers

Recessed Entertainment Box, Old Work, 3-Gang, Non-Metallic, Color: White. For use with Power or Low Voltage.

Category: Recessed Home Entertainment Boxes

HUB S1R6SPH

Category: Recessed Floor Box Service Fittings

WIREMOLD CAF3-DP1 DUPLEX PWR

Category: Recessed Floor Box Service Fittings

Brushed aluminum duplex cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). Flip lids can also be used with 106 type frames for communications. NOTE: Brass covers and flanges are not interchangeable with aluminum or nonmetallic covers and flanges. Nonmetallic covers are interchangeable with aluminum flanges. Made in USA. Nickel

Category: Square / Rectangle Recessed Box Covers

Four-piece power service fitting. Duplex opening both sides. Receptacles not included. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Includes round PVC floor box, one 15A, 125V tamper-resistant decorator style duplex receptacle, one coax F connector, one RJ45 Category 5e connector, and brass duplex opening cover plate with single flip lid.

Category: Assembled Recessed Round Boxes

Floor Box, Flush Service, Diameter: 3-5/8 Inch, Depth: 4-1/4 Inch, Cubic Inches: 60, Side Knockouts: (4) 3/4 and (4) 1 Inch, Bottom Knockouts: (2) 1/2 and (2) 3/4 Inch, Steel

Category: Square Recessed Floor Boxes

Includes 6" diameter poke-thru stem assembly with a disposable plate. Devices are recessed 3 1/4" (83mm) below floor surface. No cover assembly is included. No device plates are included. For use with the following cover assemblies (purchased separately): 6CTC and 6CT Series. INCLUDED: For Side Compartments: No Device Plates are provided. For Center Compartment: No Device Plates are provided. For Bottom Feed Compartment: One (1) 5PTHA 1/2-Gang Pass-Through Housing Assembly, One (1) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit). NOTE: UL Fire Classified for up to 2-hour rated floors.

Category: Assembled Poke-Through Units

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Gray

Category: Assembled Poke-Through Units

KEL S-3182 BRASS

Category: Round Recessed Box Flanges

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Surface, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies