Search results

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 3 Inch,for Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid Conduit Set Screw Couplings

Conduit Hardware, Couplings, Armored Cable, Type: Set-screw, Trade Size: 4 Inch,for Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid Conduit Set Screw Couplings

Oz-g Mf-125 1-1/4 Fem/male pull Ell

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type EFL Concrete Slab Electroform 90 DEG Conduit Insert, Size: 1 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 2-1/2 IN Base Diameter X 2-15/16 IN Base To Conduit Center X 3-11/16 IN Height, 3-13/16 IN Turning Radius, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA: C22.2 No.18, Federal Specification W-F-408E, For Concrete Slabs 6 IN Thickness And Up, Threaded Rigid Conduit And IMC

Category: Iron Rigid Conduit Elbows

Rigid Elbow, 1", Short, Female to Female, 90°, Malleable Iron, Approved for Hazardous Locations, For Use With Rigid/IMC Conduit

Category: Iron Rigid Conduit Elbows

Rigid Conduit Insulated Bushing, Type Threaded Male, Trade Size 4 Inch, Diameter 5-1/8 Inch, Throat Type Thermoset Phenolic Insulated, Temperature Rating 150 Deg C, Material Thermoset Phenolic, Approval UL, CSA, Used On Rigid Conduit/IMC, Bushing Hole Diameter 3-7/8 Inch, Locknut Thread Length 5/8 Inch, Includes Locknut

Category: Steel Rigid Conduit Cable Supports

OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 1 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-15/16 IN Maximum Diameter X 1-3/16 IN Length, 9/16 IN Thread Lengt

Category: Rigid Compression Couplings - Iron

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3 IN, 4-3/16 IN Outside Diameter, Length: 3-5/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third P

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type MF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-1/4 IN, Trade Size: 3/4 IN, Connection: FNPT X MNPSM, 1-1/2 IN Height, 1/2 IN Thread Length, Third Party Certification: UL File Number E-

Category: Iron Rigid Conduit Elbows

OZ-Gedney Type DX Deflection/Expansion Fitting, Trade Size: 2 IN, 3.88 IN Outside Diameter, Length: 8.13 IN, Flexibility: RMC And IMC, End Couplings: Bronze, Sleeve: Neoprene, Bands: Stainless Steel, Bonding Jumper: Tinned Copper Braid, Enclosure:

Category: Bronze / Copper Rigid Conduit Expansion Couplings

Oz-g Ssp100 1-in Split Cplg

Category: Iron Rigid Conduit Bolt-On Couplings

Conduit Sealing Bushing, Type: CSBE, Size: 3 Inch, 1 to 4 Wires, Material: Malleable Iron

Category: Iron Rigid Conduit Cable Supports

Conduit Hardware, Couplings, Armored Cable, Type: Threaded Rigid And Imc To Flexible Metal, Trade Size: 3/4 Inch, Material: Malleable Iron, Features: Concrete Tight

Category: Iron Rigid To EMT Combination Couplings

OZG 4Q-400FM 4" COMB CP LFMC/

Category: Iron Rigid To Flex Combination Couplings

3" Pull Box Fittings, Weatherproof, Malleable Iron End Units, Includes: Copper Ground, Pressure Ring, and Type A Insulating Bushing. For Use with Rigid/IMC Conduit.

Category: Iron Rigid Conduit Pull Box Fittings

Pulling Elbow, Threaded, Female / Female, 2 Inch, Malleable Iron, Rigid Conduit / IMC, With Gasket, 90°, UL, CSA, GASKETED - WATERTIGHT

Category: Iron Rigid Conduit Elbows

Features: Physical Dimension 3 1/4 In Width X 2 5/16 In Height, Application: Rigid Conduit, Imc, Standard: Ul 514b, Csa C22.2, NEMA: Fb-1, Size: 1.25in, Material: Malleable Iron, Finish: Zinc Plated

Category: Iron Rigid Conduit Elbows

Rigid Set Screw Coupling, Size: 5 Inch, Concrete Tight, Malleable Iron

Category: Iron Rigid Conduit Set Screw Couplings

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 2-1/2 IN, 4 IN Outside Diameter, Length: 3-3/16 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Pa

Category: Iron Rigid Conduit Three Piece Couplings

Features: Physical Dimension 4 1/2 IN Diameter X 3 1/8 IN Height, Application: Rigid Conduit, IMC, EMT, Standard: UL 514B, CSA C22.2, NEC, Size: 3IN, Material: Malleable or Ductile Iron, Finish: Hot Dipped Galvanized

Category: Iron Rigid Conduit Cable Supports

Features: Physical Dimension 8 5/8 In Length X 6 5/8 In Diameter, Application: Rigid Metal Conduit, Imc, Standard: Ul 514b, Csa C22.2, Fed Spec: W-f-408e, NEMA:fb-1, Size: 4in, Material: Malleable Or Ductile Iron, Finish: Hot Dipped Galvanized

Category: Iron Rigid Conduit Expansion Couplings

Rigid Expansion/Deflection Coupling, 2-1/2 Inch, 1 Inch Movement, 30° Deflection All Directions, Length: 6-3/4 Inch, Raintight, Concrete Tight, Nema 4, End Couplings: Bronze, Sleeve: Neoprene, Bands: Stainless Steel, Bonding Jumper: Tinned Copper Braid, For Use with Rigid/IMC Conduit

Category: Bronze / Copper Rigid Conduit Expansion Couplings

Deflection/Expansion Fitting, Type DX, 4 Inch, 3/4 Inch Movement, Raintight, Concrete Tight, Bronze End Couplings, Neoprene Sleeve, Stainless Steel Bands, Tinned Copper Braid Bonding Jumper, For Use With Rigid/IMC Conduit

Category: Bronze / Copper Rigid Conduit Expansion Couplings

OZ-Gedney Type DX Deflection/Expansion Fitting, Trade Size: 1 IN, 2-3/4 IN Outside Diameter, Length: 7 IN, Flexibility: RMC And IMC, End Couplings: Bronze, Sleeve: Neoprene, Bands: Stainless Steel, Bonding Jumper: Tinned Copper Braid, Enclosure: NE

Category: Bronze / Copper Rigid Conduit Expansion Couplings