"CCP2-AUX"

Relay, Expansion, Safety Monitor, 115VAC, MSR122ERelay, GuardMaster, MSR122E, Expansion, Safety Monitor, 115 Volt AC, 1 or 2 Normally Closed, Inputs, 6 Normally Open, Safety Outputs, 2 Normally Closed, Auxiliary Outputs, Fixed Terminals, Automatic Reset

Contactor, 2 Pole, 60 Amp, Non-Reversing, 24V DC Coil, 1 NO and 1 NC Auxiliary Contacts

Auxiliary Contact Block, 2-Pole, 2 N.O. Front Mount, 1 per Motor Protection Ciircuit Breaker

AB 78095-1D AUXILARY CONTACT

Abb Ms325-hk20 2n.o.aux Cont for Ms325 Starter

The MS497-32 manUAl motor starter is a 70 mm width devices with a rated operational current of ie = 32.0 a. this device is used to manUAlly switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manUAl motor starter offers a rated service short-circuit breaking capacity ics = 50 ka at 400 vac and the trip class 10. further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manUAl motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. auxiliary contacts, signalling contacts, undervoltage releases and shunt trips are available as accessory.

3 pole, 55 amp, non-reversing across the line contactor with 110-120V AC coil and 1 NC auxiliary contact

ALB 195-GB02 KITAUXILIARY CO

4 pole, 25 amp, across the line block contactor with 24V DC coil and no auxiliary contacts

4 pole, 30 amp, across the line block contactor with 230-240V AC coil and no auxiliary contacts

NL, contactor relays are used for switching auxiliary circuits and control circuits - Poles: 4-pole contactor relays (mechanically linked contact elements available) - Control circuit: DC operated with solid core magnet circuit. The polarity on the coil terminals (A1+ and A2-) must be respected - Accessories: a wide range of accessories is available NL, contactors are fitted with low consumption DC coils and are suitable for a direct control by PLC outputs.

3 pole, 55 amp, non-reversing across the line contactor with 24V AC coil and 1 NO auxiliary contact

N, contactor relays are used for switching auxiliary circuits and control circuits - Poles: 4-pole contactor relays (mechanically linked contact elements available) - Control circuit: AC operated with laminated magnet circuit - Accessories: a wide range of accessories is available.

3 pole, 55 amp, non-reversing across the line contactor with 24V AC coil and 2 NO and 2 NC auxiliary contacts

3 pole, 21 amp, non-reversing across the line contactor with 208V AC coil and 1 NO auxiliary contact

The MS497-630 manUAl motor starter is a 70 mm width devices with a rated operational current of ie = 63.0 a. this device is used to manUAlly switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The manUAl motor starter offers a rated service short-circuit breaking capacity ics = 50 ka at 400 vac and the trip class 10. further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The manUAl motor starter is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. auxiliary contacts, signalling contacts, undervoltage releases and shunt trips are available as accessory.

It. Logic Level Auxiliary Nc With Quick Connect Terminals

Abb 1sna607201r1300 D2,5/5 R121l ReAbb; Relay Module; R500; Wire Size: 0.2 - 4 Sq-mm (solid), 0.22 - 2.5 Sq-mm (stranded); Screw Driver Size: 3.5 Mm; Time: Pull-in Time: 5 Ms, Drop-out Time: 8 Ms, Bounce Time: 1.5 Ms; Color: Grey; Insulation Coil/contacts: 4000 Vrms; Breakdown Voltage: 4000 Vrms; Drop Out Voltage: 2.4 V; Tightening Torque: 0.4 - 0.6 N-m; Spacing: 58 Mm; Operating Temperature: -20 To +69 Deg C; Enclosure: NEMA 1, Ip20; Number Of Load Operation: 105 In Ac15 (on-load), 10 X 106 (off-load); Outputsignal: 250 V/6 Amp; Voltage Rating: 24 Vdc; Size: 104 Mm Length X 58 Mm Width X87 Mm Height; Number Of Auxiliary Contacts: 1 Spdt; Power: 0.3 Wtt; Amperage Rating: 12 Milamp; Storage Temperature: -40 To 80 Deg C; Switching: Voltage: 12 V/250 Vac; Current: 10 Milamp/6 Amp; Load: 0.6/1500 Vamp (ac1), 0.6/140 Wtt (dc1);wire Strip Length: 10 Mm

SQD GV2AD1010 FAULT SIGNAL NO FS NO AUXILIARY

3 pole, 400 amp, non-reversing across the line contactor with 100-250V AC/DC coil with 1 NO and 1 NC auxiliary contacts

Digital Optimizer, Relay, 9V battery, 2-line, 16-character per line liquid crystal display, Used with Digitrip OPTIM Trip Unit, auxiliary power modules

3 pole, 150 amp, non-reversing across the line contactor with 48-130V AC/DC coil and 1 NO and 1 NC auxiliary contacts

4 pole, 30 amp, across the line block contactor with 24V AC coil and no auxiliary contacts

Abb; Bell Alarm Kit; Auxiliary Contacts: 1 Form C/1ba