"CCP2RL-3-30CC"

Breaker, Mechanical Lug Kit, 3-Pole, 250 Amp, 3/0 - 350 MCM AWG, CU/AL

Category: Molded Case Circuit Breaker Lug Kits

1 Inch, Insulated Ground Bushing, Threaded Type:, Bushing Material: Malleable Iron, Lug Material: Aluminum. Wire Size: 14 AWG (Solid) - 4 AWG (Stranded). For Copper or Aluminum Grounding.

Category: Threaded Ground Bushings

AB 889R-R3ECA-5 889R AC MICRO CORD

Category: 3-Pin Cordsets

Kinetix Low Inertia, 480 V AC, 115 mm Blt Circ, 3 Mag, 4500 RPM, Multi Turn, Keyed, IP66 Seal Fitted

Category: 480 VAC Servo Motors

Timing Module, Pneumatic, On-Delay, .3 - 30 Sec. Range

Category: Starter & Contactor Pneumatic Timers

Compression Cross Grid Connector, 250 - 500 MCM or 5/8 - 3/4 Inch Ground Rod or #5-#6 Rebar Run and 2 AWG - 250 MCM Tap, Copper

Category: Grounding Grid Connectors

GR Type Conduit Outlet Box, Explosion-Proof, Dust-Ignitionproof, Aluminum, Unilet, GRCA Hub Type. Includes: Internal Ground Screw and O-Ring, Internally Threaded Surface Cover with 3.38 Inch Opening, 18 Cubic Inches and (3) 3/4 Inch Threaded Hubs. For use with Threaded Metal Conduit.

Category: Explosion-Proof C Conduit Outlet Boxes

45 Amp Fuse, Rejection, Brand or Series: Class RK5, Interrupting Rating: 200000 Amp VAC RMS Symmetrical, 20000 Amp VDC, Terminal Type: Cartridge, Rejection, Dimensions: 13/16 Diameter x 3 Length Inch, Voltage Rating: 250 VAC/125 VDC, Features: Time Delay, Dual Element

Category: Class RK5 Fuses

Reversing Contactor, IEC Standard, 9 Amp, 3-pole, 24 Volt DC, Electronic Coil, 1 Normally Open, 1 Normally Closed, Auxiliary Contacts

Category: IEC Contactors - Forward/Reversing

Disconnect Switch, Operating Mechanism, Handle, Flange Mount, 6 Inch, NEMA 1/3/3R/4/12

Category: Molded Case Circuit Breaker Operating Handles

Panduct Wide Slot Wiring Duct, Type G, 3.25" W x 4.10" H x 6' L, Lead Free PVC, White ***SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT***

Category: Standard Density Wire Duct

Controller, CompactLogix, 5380, 3 MB, 16 -I/O, 40 Nodes, Standard

Category: Programmable Logic Controllers

Decorator 3-Way Switch, 20A, 120/277V, White, Back & Side Wire

Category: 20 Amp Commercial Grade Decorator Switches

Flat Plate Fitting, 4 Holes, Hole Diameter: 9/16 in, Material: Steel, Finish: Electro Galvanized.

Category: Flat Plate Strut Channel Connectors

Assembled, 30.5 mm, Heavy-Duty, Push-Pull Unit, Red Standard Operator, 2 Position, Operating Mode: Maintained Push, Maintained Pull, 40 mm, Non-illuminated, 600V Rated, 1 NO & 1 NC Contacts. NEMA Rating: 3, 3R, 4, 4X, 12, 13. Includes: (2) Square Engraved Legend Plates: Emergency Stop and Stop.

Category: 30mm Push-Pull Pushbutton Operators

Mounting Hood for Mercmaster III, Ceiling, 3/4 Inch Hub ***Mounting Hood Only, Modules Sold Separately***

Category: Fixture Mounting Frames & Kits

Contactor, IEC, 23 Amp, 3-Pole, 24 Volt DC Coil with Integrated Diode, 1 Normally Closed, Auxiliary Contact

Category: IEC Contactors - DC Operating

5 KVA, 1-Phase, 240 x 480 Primary Volts - 120/240 Secondary Volts, NEMA 3R, Shielded Automation Transformer, Encapsulated,60 Hz. HxWxD: 17.00" x 14.00" x 9.00". ***For use with 3-Phase Source by connecting primary to any two wires of a 3-Phase System***

Category: 5 KVA Dry Type Transformers

In-Use Cover, 1-Gang, Weatherproof, Horizontal Mount, Metallic, Depth: 3-1/4". Gray. Includes Separate Insert Types: Duplex Receptacle, (1) GFCI/Decorator, (1) Toggle Switch, (6) Single Receptacle, Diameter: 1.25", 1.375", 1.625", 1.6875 or 2.125" and (1) Adapter. Includes: Lockable Tab.

Category: 1-Gang Weatherproof In-Use Box Covers

FSS Box, Weatherproof, Dead-End, 1-Gang, With Lugs, 3/4 Inch, Non-Metallic

Category: 1-Gang Non-Metallic FS & FD Device Boxes

Mechanical Lug, Aluminum, 4 Barrel, 4 Hole Mount, Dual Rated for Copper or Aluminum, 6 AWG to 350 MCM, Bolt Hole: 9/16 Inch, Hole Spacing: 1-3/4 Inch, (1) Hex Socket Set Screw per Conductor

Category: 4-Conductor Aluminum Mechanical Lugs

Switch. Disconnect, Enclosed, ABS Thermoplastic, 32 Amp, 500 Volt AC, 3 Pole, 2 Position, Red/Yellow Knob, Base/DIN Rail Mount

Category: Enclosed Non-Fusible Disconnect Switches

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-5/8 IN Body Diameter X 4-3/8 IN Overall Length, 2-7/16 IN Turning Radius, 3.75 OZ Sealing Compound Required, 1/8 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

MC Luminary Cable, MCLITE, Aluminum, 16-2 (1TPJ) Purple,Pink / 12-3 Stranded Brown, Orange, Gray with Green Ground, 250 Foot Coil, 16 AWG

Category: Aluminum Armored Luminary Cable